Multi-couplings

​The PSF multi-coupling from dnp was developed to enable coupling under residual pressure on the mould side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200 bar! The special seals of the connectors are designed for this application. The hydraulic lines are connected via flat-sealing coupling elements, which allow several hydraulic lines to be connected or disconnected within a very short time. This is done with an operating lever whose guide link is designed to minimise the operating forces. The outstanding features of the multi-coupling are that the connections cannot be mixed up, the connection is quick, it can be coupled under residual pressure and leakage during the coupling process is optimally minimised. Another advantage is its interchangeability with the Faster multi-coupling P506. Not only are the two halves of the multi-coupler interchangeable with Faster P506, but also the plugs and sockets. Sub-assembly 2/DN10Pressure max. 250 bar Flow rate max. 46 l/min Connection R1/2″IG

​The PSF multi-coupling from dnp was developed to enable coupling under residual pressure on the mould side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200 bar! The special seals of the connectors are designed for this application. The hydraulic lines are connected via flat-sealing coupling elements, which allow several hydraulic lines to be connected or disconnected within a very short time. This is done with an operating lever whose guide link is designed to minimise the operating forces. The outstanding features of the multi-coupling are that the connections cannot be mixed up, the connection is quick, it can be coupled under residual pressure and leakage during the coupling process is optimally minimised. Another advantage is its interchangeability with the Faster multi-coupling P506. Not only are the two halves of the multi-coupler interchangeable with Faster P506, but also the plugs and sockets. Sub-assembly 2/DN10 Pressure max. 250 bar Flow rate max. 46 l/min Connection R1/2″IG

The PSF multi-coupling from dnp was developed to enable coupling under residual pressure on the mould side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200 bar! The special seals of the connectors are designed for this application. The hydraulic lines are connected via flat-sealing coupling elements, which allow several hydraulic lines to be connected or disconnected within a very short time. This is done with an operating lever whose guide link is designed to minimise the operating forces. The outstanding features of the multi-coupling are that the connections cannot be mixed up, the connection is quick, it can be coupled under residual pressure and leakage during the coupling process is optimally minimised. Another advantage is its interchangeability with the Faster multi-coupling P506. Not only are the two halves of the multi-coupler interchangeable with Faster P506, but also the plugs and sockets. Sub-assembly 2/DN10Pressure max. 250 bar Flow rate max. 46 l/min Connection R1/2″IG

The PSF multi-coupling from dnp was developed to enable coupling under residual pressure on the mould side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200 bar! The special seals of the connectors are designed for this application. The hydraulic lines are connected via flat-sealing coupling elements, which allow several hydraulic lines to be connected or disconnected within a very short time. This is done with an operating lever whose guide link is designed to minimise the operating forces. The outstanding features of the multi-coupling are that the connections cannot be mixed up, the connection is quick, it can be coupled under residual pressure and leakage during the coupling process is optimally minimised. Another advantage is its interchangeability with the Faster multi-coupling P506. Not only are the two halves of the multi-coupler interchangeable with Faster P506, but also the plugs and sockets. Sub-assembly 2/DN10 Pressure max. 250 bar Flow rate max. 46 l/min Connection R1/2″IG

Automated workflows in manufacturing, testing, controlling and regulating require the highest precision. This is where our multi-coupling 2-way set comes into play: It allows you to effortlessly connect several oil hydraulic lines at the same time. The fixed arrangement of the coupling elements eliminates confusion and the duration of the coupling process is shortened enormously. There are neither fluid losses nor air inclusions during the coupling and uncoupling phases~ even at ~ Presence of pressure. Incorrect connections are virtually impossible.The multi-coupling 2-way set is used here:Hydraulic equipment for agricultural machinesHydraulic equipment for forestry machinesHydraulic equipment for conveyor machinesHydraulic equipment for commercial vehiclesComponents on test benches for hydraulic systemsCooling or heating when molding plastic and metal< li>Hydraulic systems in industrial applicationsHydraulic systems for special transport vehicles ~Scope of delivery / technical data:Complete with fixed and loose parts Assembly 2, DN10Pressure max. 350 barFlow 45 L/minConnection R1/2" female

The multi-coupling PSF from dnp was developed to enable coupling under residual pressure on the tool side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200 bar! The special seals on the connectors are designed for this application.The hydraulic lines are connected via flat-sealing coupling elements through which several hydraulic lines can be connected or separated within a very short time. This is done with an operating lever whose guide link is designed in such a way that the operating forces are kept as low as necessary.The outstanding features of the multi-coupling are the security of connections, quick connection, ability to couple under residual pressure and optimally minimized leakage during the coupling process. Another advantage is the interchangeability with the Faster multi-coupling P206. Not only are the two halves of the multi-coupler with Faster P206 interchangeable, but also the plugs and sockets.Assembly 2/DN10Pressure max. 250 barFlow rate max. 80 l/minConnection R1/2?IG

The multi-coupling PSF from dnp was developed to enable coupling under residual pressure on the tool side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200 bar! The special seals on the connectors are designed for this application.The hydraulic lines are connected via flat-sealing coupling elements through which several hydraulic lines can be connected or separated within a very short time. This is done with an operating lever whose guide link is designed in such a way that the operating forces are kept as low as necessary.The outstanding features of the multi-coupling are the security of connections, quick connection, ability to couple under residual pressure and optimally minimized leakage during the coupling process. Another advantage is the interchangeability with the Faster multi-coupling P506. Not only are the two halves of the multi-coupler with Faster P506 interchangeable, but also the plugs and sockets.Assembly 2/DN10Pressure max. 250 barFlow rate max. 46 l/minConnection R1/2?IG

With 2 hydraulic connections, flow max. 40 l/min, max. pressure 250 bar, hydraulic connection G1/2"~ IG

With 4 hydraulic connections and 1 3-pin electric coupling. Hydraulic connection G1/2?IG

With 4 hydraulic connections and 1 3-pin electric coupling. Hydraulic connection M22x1.5 AG 15L

With 4 hydraulic connections, flow rate max. 40 l/min, max. pressure 250 bar, hydraulic connection M22x1.5 AG 15L

With 4 hydraulic connections, flow rate max. 40 l/min, max. pressure 250 bar,Hydraulic connection G1/2?IG

With 2 hydraulic connections, flow max. 70l/min., max. pressure 250 bar, hydraulic connection G1/2"~ Female thread, can be coupled under pressure.

Male to fixed part with G1/2" internal thread

6-pin for electrical cable entry on the tractor side.

for all Faster multicouplers

Safety lock for locking the locking lever when the lever is closed and open. The locking mechanism is suitable for all DNP multi-couplers in the PSF series. The set consists of a push button, 1 roller and 1 spring.

​Safety lock for locking the locking lever when the lever is closed and open. The locking mechanism is suitable for all DNP multi-couplers in the PSQ and PSL series. The set consists of a push button, 2 rollers and 2 springs.

for all Faster multi-couplers

2 screws and 2 plain bearings for size 08 suitable for the multi-coupler blocks P5 with electric clutch, P8 and PS.Plain bearing dimensions: I x A x L: 10x15x11.9mm

2 screws and 2 plain bearings for size 06 suitable for the multi-coupler blocks P2, P5 and P6.Plain bearing dimensions: I x A x L: 10x15x6.6mm

Sealing ring for plug suitable for Faster multi-couplings in sizes DN10 and DN13

Sealing ring for plug DN10 suitable for DNP multi-coupling and flat-sealing plugs of the PLT1, PLT4, PLT6, PLK4, PVT4, PVTX and PST4 series.

6-pin for electrical cable entry on the device side.