Control valves GM08/2

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA55276

GMS Control valve GM08/2 DW DW with spring return Control valve GM08/2 DW DW with spring return

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Double-acting control slide DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R3/8?Screw-in thread T, T2: R1/2?

€169.00*

#FA118088

GMS Control valve GM08/2 DW DW-SWR Control valve GM08/2 DW DW-SWR

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Double-acting control spool DW-SWR: H=lifting, 0=middle position, S=lowering, SW-R=floating position lockedStandard version of the valves in parallel connection.Flow max.: 45 L/ min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R3/8?Screw-in thread T, T2: R1/2?

€239.00*

#FA118086

GMS Control valve GM08/2 DW EW-SR with spring return Control valve GM08/2 DW EW-SR with spring return

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Single-acting control slide EW-SR: H=Raise, 0=Middle position, SR=Lowering lockedStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure : 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R3/8?Screw-in thread T, T2: R1/2?

€199.00*

#FA118105

GMS Control valve GM08/2 DW-SWR DW-SWR with spring return Control valve GM08/2 DW-SWR DW-SWR with spring return

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW-SWR: H=Raise, 0=Middle position, S=Lowering, SW-R Floating position locked2. Control slide doubleacting DW-SWR: H=raise, 0=middle position, S=lower, SW-R floating position lockedStandard version of the Valves in parallel connection.Flow rate max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R3/8?Screw-in thread T, T2: R1/2?

€279.00*

#FA118107

GMS Control valve GM08/2 with joystick handle DW DW with spring return Control valve GM08/2 with joystick handle DW DW with spring return

The control valve has a directly mounted cross lever control with a joystick handle.?Mechanical actuation with spring return in standard version. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Double-acting control slide DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R3/8?Screw-in thread T, T2: R1/2?

€245.00*

#FA118106

GMS Control valve GM08/2 with joystick lever DW DW with spring return Control valve GM08/2 with joystick lever DW DW with spring return

The control valve has a directly mounted cross lever control with a joystick lever.?Mechanical actuation with spring return in standard version. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Double-acting control slide DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R3/8?Screw-in thread T, T2: R1/2?

€199.00*

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.