Mobile control units bm40/bf40

​Hydraulic control valve in monobloc design with electromagnetic 12 volt operation and manual emergency operation via hand lever. Standard radio valve for FAIE crane cable winches. The solenoid valve is double-acting and has a connection for pressure transfer,The connections to the working cylinders are locked in the zero position - no floating position in the O position!Technical data:12 V 3 AFlow rate max. 50 l/min.Operating pressure: max. 175 barConnections: 1/2 inch female thread inlet/outlet and consumer, 1/2 inch male thread for pressure transferControl valve with additional manual emergency operation.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?H=Raise, 0=Middle position, S=LoweringThe switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?H=Raise, 0=Middle position, S=Lowering, SW-R=Floating position locked.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Flow max.: 45 L/min. Operating pressure: 250 bar max. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8"~Screw-in thread P2, T2: R1/2"~H=Raising, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?H=Raising, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Flow max.: 45 L/min. Operating pressure: 250 bar max. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8"~Screw-in thread P2, T2: R1/2"~H=Raising, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Control slide doubleacting DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 45 L/min .Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Control slide doubleacting DW-SWR: H=Raise, 0=Middle position, S=Lowering, SW-R=Floating position lockedStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Control slide singleacting EW-SR: H=lifting, 0=middle position, S=lowering lockedStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Flow max.: 45 L/min. Operating pressure: 250 bar max. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8"~Screw-in thread P2, T2: R1/2"~H=Raising, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW-SWR: H=Raise, 0=Middle position, S=Lowering, SW-R Floating position locked2. Control slide doubleacting DW-SWR: H=raise, 0=middle position, S=lower, SW-R floating position lockedStandard version of the Valves in parallel connection.Flow rate max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Flow rate max.: BM40 = 40 L/min., BM70 = 80 L/min.Operating pressure: 250 barmax . Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Single-acting control slide EW: H=Raise, 0=Middle position, S=Lower2. Double-acting control slide DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 bar max. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

​Mechanical actuation with spring return in standard design. The centre position is designed with a pressureless circulation and connections A & B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the spools.1. Single-acting control spool EW: H=Lift, 0=Centre position, S=Lower2. Double-acting control spool valve DW-SWR: H=Lift, 0=Centre position, S=Lower, SW-R=Floating position lockedStandard version of the valves in parallel connection.Max. flow rate: 45 L/min.Operating pressure: 250 barMax. pressure: 320 barPressure relief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T: R3/8″Screw-in thread P2, T2: R1/2″The switch positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Single-acting control slide EW-SR: H=Raise, 0=Middle position, SR=Lowering locked2. Double-acting control spool DW-HR/SR/SWR: HR=raise, 0=middle position, SR=lower, SW-R=floating position lockedStandard version of the valves in parallel connection.Flow max. : 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Single-acting control slide EW-SR: H=Raise, 0=Middle position, SR=Lowering locked2. Double-acting control spool DW-SWR: H=lifting, 0=middle position, S=lowering, SW-R=floating position lockedStandard version of the valves in parallel connection.Flow max.: 45 L/ min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Single-acting control slide DW: H=Raise, 0=Middle position, S=Lower2. Double-acting control slide DW-HR: HR=lifting locked, 0=middle position, S=lowering3. Control slide doubleacting DW-SWR: H=Raise, 0=Middle position, S=Lowering, SW-R=Floating position lockedStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Single-acting control slide DW-SWR: H=raise, 0=middle position, S=lower, SW-R=floating position locked2. Control slide doubleacting DW-SWR: H=raise, 0=middle position, S=lower, SW-R=floating position locked3 . Control slide doubleacting DW-SWR: H=raise, 0=middle position, S=lower, SW-R=floating position lockedStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8?Screw-in thread P2, T2: R1/2?The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Flow max.: 45 L/min. Operating pressure: 250 bar max. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R3/8"~Screw-in thread P2, T2: R1/2"~H=Raising, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve.

With mechanical limit switch

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW-HR: HR=lifting locked, 0=middle position, S=lowering2. Double-acting control slide DW: H=Raise, 0=Middle position, S=Lower3. Double-acting control slide DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R3/8?Screw-in thread T, T2: R1/2?

Radio control with hydraulic control valve!2-channel radio control set for hydraulically driven winches, oil motors or hydraulic cylinders with 12 volt monoblock valve, the radio is pre-wired with a 7-pin vehicle plug , the solenoid valve is double-acting and has a connection for pressure continuation, technical data: 12 volts 3 amps, flow rate max. 50 L/min. Connections: 1/2?IG inlet/output and consumer<~cbht/>~1/2?AG to continue printing

Mechanische Betätigung mit Federrückstellung in Standardausführung. Die Mittelstellung ist mit einem drucklosen Umlauf ausgeführt und die Anschlüsse A, B sind gesperrt. Druckbegrenzungsventil am Anschluss P (Pumpe). Negative Überdeckung der Schieber.Standardausführung der Ventile in Parallelschaltung.Durchfluss max.: 45 L/min.Betriebsdruck: 250 barmax. Druck: 320 barÜberdruckventil eingestellt: 140 bar, einstellbar von 100-250 barEinschraubgewinde A, B, P, T,: R3/8″Einschraubgewinde P2, T2: R1/2″H=Heben, 0=Mittelstellung, S-R=SenkenDie angeführten Schaltstellungen sind vom jeweiligen Modell des Steuerventils abhängig.

Mechanische Betätigung mit Federrückstellung in Standardausführung. Die Mittelstellung ist mit einem drucklosen Umlauf ausgeführt und die Anschlüsse A, B sind gesperrt. Druckbegrenzungsventil am Anschluss P (Pumpe). Negative Überdeckung der Schieber.Standardausführung der Ventile in Parallelschaltung.Durchfluss max.: 45 L/min.Betriebsdruck: 250 barmax. Druck: 320 barÜberdruckventil eingestellt: 140 bar, einstellbar von 100-250 barEinschraubgewinde A, B, P, T,: R3/8″Einschraubgewinde P2, T2: R1/2″H-R=Heben gerastet, 0=Mittelstellung, S=SenkenDie angeführten Schaltstellungen sind vom jeweiligen Modell des Steuerventils abhängig.