Hydraulic program

Used to connect hydraulic pumps with a 1:8 tapered shaft and electric motors. The conical bore depends on the size BG1, BG2 or BG3 of the hydraulic pump. Material: AluminiumThe largest diameter of the cone is on the side of the hydraulic pump: Size 1 9.7 mm Size 2 17.2 mm Size 3 22.2 mm

Three-phase motor 4-pole, speed 1500rpm, up to 2.0kW 230/400V, from 3.0kW 400/690V, design B3/B5 with flange and feet. Protection class IP55.

3-pin electrical plug suitable for FASTER multi-couplings Block 06 and Block 10

3-pole electrical sleeve suitable for FASTER multi-couplings Block 06 and Block 10

Soft start and temperature-dependent speed control of the fan. The maximum starting current is approx. 10% above the rated fan current. The fan speed is varied depending on the oil temperature using a temperature sensor (accessory). Overload and reverse polarity protection on voltage input. Time-delayed fan activation for self-protection. Control range with temperature sensor 45-55C, switching point with temperature switch 50C. Includes adapter cable for temperature switch (61128, 77617) or sensor (61127, 77616) with plug.

Fan motor complete with housing, sealing profiles and fastening material suitable for asa oil cooler type 0176/0177/0256/0257, TT16, TT25By using a fan controller, the maximum charging and discharging current (ripple current) can be kept at the maximum value of 1%.Temperature range from -20 °C to 80 °CScope of delivery: 1 pc. Fan motor complete with housing, 4 pcs. screws with nuts and washers, 4 pcs. Spacers, 2 pcs. sealing profiles

Faster leakage oil drain connection T-piece

Faster leak oil drain housing TARV simply with dust cap. The leakage oil drain connection is designed at 45.

Leak oil drain housing Faster TNN simply without dust cover and without leak oil drain connection. The dust covers can be mounted in different colors. The leakage oil drain connections are available in straight, 45 and 90 versions.

Leak oil drain housing Faster TNP offset with a distance of 51mm and TA dust cover in black. The outlet for the hose connection is designed at 45. The dust covers can be exchanged for other colors.

Leak oil drain housing Faster TNN with leak oil drain connection 45 and without dust cover. The dust covers can be mounted in different colors.

Sleeve for loose part (device side) with G1/2" internal thread

According to DIN 2353 and ISO 16028, lightweight series.

Sleeve, no leakage oil losses!

Ventilation filter and filler sieve

Opening 48 mm, with longer sieve insert 150 mm

Filler screw with breather and filter. Screw-in thread M18x1.5mm with O-ring seal. Outer 42.5 mm. Prevents foreign bodies from entering and transmission or hydraulic oil from escaping. The filler plug can be loosened by hand without tools.

Standard filtration 25 micron, with by-pass valve, 1.7 bar