Nozzles & accessories

#FA74419

TeeJet Cap with round hole and seal, Quick TeeJet

Quick TeeJet cap with round hole and seal in the color red. Suitable for the following TeeJet nozzles: AIXTXA ConeJet, FL FullJet, TG Full Cone, TK FloodJet, TX/TXA ConeJet, hose nipple for nozzle body

€2.19*

to the product

#FA72989

Cap with seal for AI3070, light green

€3.35*

#66757

Cap with seal, SW11

Color: grün

Variants from €2.19*

€2.19*

#FA66756

TeeJet Cap with seal, SW8, black

€1.59*

#FA66758

Gasket for nozzle cap

Inner 9.0 mm, outer 19.5 mm, thickness 3.5 mm

€0.75*

#72983

Injector double flat jet nozzle AI3070 TeeJet

Color: rot | Type: 3070-04VP

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

Variants from €7.50*

€13.90*

#72977

Injector double flat jet nozzle AITTJ60 TeeJet

Color: blau | Type: 11003

Application: Area sprayingInjector nozzle with double flat jet, 110 spray angle each.Angle of 60 between the two spray jets directed forward and backwards.Drop size like long AI TeeJet, therefore very low drift from 1.5 to 4 bar , optimal pressure for the effect from 4 bar, drift reduction excellent.Good lateral attachment to upright target surfaces and intensive penetration of tiered foliage.Large, round cross-sections for liquid and air increase operational safety and minimize wear.Two outer and inner air intake holes, injector insert can be removed if necessary.Automatic alignment of the spray jets with Quick TeeJet cap Order No. 66757.When using the nozzle with a fastening cap from a manufacturer other than TeeJet pay attention to the orientation of the nozzle. The black dot on the nozzle must point in or against the direction of travel.

Variants from €13.90*

€13.90*

#72954

Injector flat jet nozzle AIC TeeJet

Color: rot | Type: 11004

Application: Liquid fertilization, surface sprayingPlastic versionVery low drift at 2-4 bar, optimal pressure for the effect 4-8 bar, JKI loss-reducing, Very good drift reduction.Thanks to the injector principle and depending on the properties of the crop protection product, drops with air pockets are possible.Larger drops can burst on the target surface, smaller drops that are created improve the deposition.The AI nozzle mouthpiece pressed into the Quick TeeJet cap ensures automatic alignment of the spray jet.

Variants from €11.00*

€11.00*

#66746

Injector flat jet nozzle AIXR TeeJet

Color: braun | Type: 11005

Application: surface spraying, liquid fertilization110 spray angle, injector technology, especially designed for the low pressure area, flat jet spray pattern.Compact dimensions with a length of 22 mm reduce the risk of damage.The injector principle produces larger drops, depending on the preparation Air pockets are also possible.Removable injector insertPressure range from 1.0 to 6 bar, optimal pressure 2 to 3.5 bar.Drift reduction very good, reducing JKI lossesAutomatic alignment of the spray jet with Quick TeeJet cap Order No. 66756

Variants from €6.19*

€6.19*

#FA52194

Nozzle filter made of plastic/stainless steel, 100M, green

€2.29*

#FA52192

Nozzle filter made of plastic/stainless steel, 50M, blue

€2.29*

#FA72993

Nozzle filter made of plastic/stainless steel, 80M, yellow

€2.29*

#72958

TTI TeeJet injector flat jet nozzle

Color: rot | Type: 11004

Application: surface spraying, liquid fertilization110 nominal spray angle, injector technology, flat spray pattern, hybrid of the patented TT Turbo TeeJet and AI injector nozzle.Patented design with large, round free cross sections minimizes the risk of clogging.Thanks to the injector principle Larger drops are generated, and depending on the preparation, air pockets are also possible.Construction made of plastic for very good chemical resistance and high wear resistance.Removable injector insert.Drift reduction excellent, JKI -loss-reducingPressure range 1-7 bar, optimal pressure in terms of effect 3-7 bar.Automatic alignment of the spray jet with Quick TeeJet cap Order No. 66757

Variants from €10.90*

€19.00*

#72965

XR TeeJet flat jet nozzle

Color: weiß | Type: 11008

Application: Surface sprayingPlastic versionPrecise liquid distribution over a larger pressure range 1-4 bar.Ideal for devices equipped with controls.Reduces drift at lower pressures and achieves better coverage at higher pressures ,Drift reduction good.Automatic alignment of the spray jet with Quick TeeJet cap Order No. 66756.

Variants from €4.99*

€4.99*

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Nozzle filter

Caps & seals

Nozzles

€10 voucher.