Attachments and accessories

​Weld-on hook suitable for front loader Euro mount, quick-change Euro mountMount for shaft with 40 mm diameter.

With this additional equipment, the slide on the spreader can be opened or closed automatically when the rear hydraulics are raised/lowered. Plug the cable from the control panel into the 7-pin socket in the tractor. This means that the spreader can implement the tractor's signals.For the following tractors, the cable can be plugged into the 7-pin signal socket (EHR):Case: MXU and CVUClaas: Axion, Ares with on-board computer INFOTRACDeutz: All Agrotron and all AgrostarFendt: from the 300 series with EHR New Holland: TSA, TVT, T 6000, T 7000, T 7500Steyr: Profi and CVTOn the following tractors the 7- pin signal socket not commercially used:John Deere: all seriesJCB: all series

Especially for retrofitting mechanical front loaders with hydraulic actuation of the tools. In conjunction with a EURO quick-change frame, a fully hydraulic front loader can be created in a very short time (see front loader conversion kit Faie No. 70599). With the 895 mm long tilting linkage and the lifting path of 507 mm, a tilt angle of up to 180 can be achieved.The scope of delivery includes 1 hydraulic hose with union nut M18x1.5 / 12L in lengths of 1100 mm and 1300 mm included.Pressure force per cylinder 6927 kg at 180 barTensile force per cylinder 5195 kg at 180 barTilt angle up to 180 Stroke path 507 mm

The hydraulically folding bale fork with 2 tines is equipped with a three-point and EURO mounting. The thick-walled zinc support tube with welded-in cone sleeves can be folded upwards hydraulically. This means that no fork protection is required for road transport. The high-quality square spring steel tines with a length of 1100 mm have an M22x1.5 mm thread and can bear loads of up to 1000 kg. The distance between the conical sleeves for the tines in the support tube is 660 mm.The spring steel tines, the hydraulic lines and the BG3 coupling plugs are included in the scope of delivery.

Mit der Lochplatten (LP)-Aufnahme können alle gängigen Frontlader, Rad-, Teleskop oder Hoflader mit unseren Anbaugeräten kombiniert werden.Die Anbaugeräte liefern wir werksseitig mit zwei fest verschweißten Lochplatten. An diese werden einfach die spezifischen Aufnahmen für die Trägerfahrzeuge verschraubt. Bitte geben Sie bei der Bestellung eines entsprechenden Anbaugerätes den Typ des relevanten Teleskop-, Hof- oder Radlader an.Lieferung: 1 Paar und Schraubensatz

Hook 40mm, locking bolt 40mm, hole spacing 280mm, 1 pair

Hook 30mm, locking eye 30mm, hole spacing 250mm, 1 pair

Universally suitable for front loaders, wheel or telescopic loaders thanks to the new screwed mounting system of the mounting consoles (for suitable consoles for your vehicle type, see page 537). Thanks to the high opening width of 1800 mm, it is also very suitable for manure removal from stables and the transport of loose manure, straw, green waste and shrub cuttings.favorable center of gravity close to the carrier vehiclegrabs with even pressure Wear plate under the lower tine carrier Forged tines with a length of 1100 mm, screwed in Thick-walled side plates Complete with hydraulic hoses, without recording consoles!

Container capacity 110 liters.The 12 volt spreader for slug pellets, grasses and catch crops, as well as mouse bait.Stepless spreading width from 2-24 mThe stepless Adjustable speed of 200-3000 rpm enables working widths from 2 m to 24 m. The spreading width of course depends on the spreading material to be spread.Transverse distribution: To correct the spreading pattern, more to the left or right, the throwing blades can be infinitely adjusted up to the spreading pattern is set in the middle. Operation on the control panel from the driver's seat.All switching functions can be operated and monitored from the tractor via the control panel. Spreading disc on/off Slider open/closed Continuous dosage of the spreading quantity.The slider is position-monitored and gives a visual and acoustic error message if the position is not reached.Advantage >: Spreading quantity can be changed while driving.Automatic start 10 times if grit is shaken.If grit gets stuck on field paths, it can happen that the motor blocks and the next time it starts not running. The automatic start system then repeats the starting process up to ten times and tears the blocked agitator shaft free. If the blockage is not cleared after ten attempts to start (foreign body), an acoustic and visual message appears on the display. Slider and spreading plate made of stainless steelSpecial stirring shaft for grassTransparent storage container with outlet opening for complete emptying.Standard scope of deliveryIncludes empty indicator - visual and acoustic signal when the container is empty.Robust 12 V Bosch electric motor, 300 W power supply cable 4 mm to the battery6 m long cable from the spreader to the control panel.Electric components waterproof

Container capacity 110 liters.The 12 volt spreader for slug pellets, grasses and catch crops, as well as mouse bait.Stepless spreading width from 2-24 mThe stepless Adjustable speed of 200-3000 rpm enables working widths from 2 m to 24 m. The spreading width of course depends on the spreading material to be spread.Transverse distribution: To correct the spreading pattern, more to the left or right, the throwing blades can be infinitely adjusted up to the spreading pattern is set in the middle.Operation on the control panel from the driver's seat.All switching functions can be operated and monitored from the tractor via the control panel.Spreading disc on/off slider on/off for continuous dosing of the spreading quantity.The slider is position-monitored and gives a visual and acoustic error message if the position is not reached.Advantage: The application quantity can be changed while driving. Automatic start 10 times if the grit is shaken.If grit gets stuck on field paths, it can happen that the motor blocks and does not run the next time it is started. The automatic start system then repeats the starting process up to ten times and tears the blocked agitator shaft free. If the blockage is not resolved after ten starting attempts (foreign bodies), an acoustic and visual message appears on the display.Slider and spreading plate made of stainless steelSpecial agitator shaft for grassTransparent storage container with outlet opening for complete emptying of residues.Standard Scope of deliveryIncludes empty indicator - optical and acoustic signal when the container is empty.Robust 12 V Bosch electric motor, 300 W power supply cable 4 mm to the battery6 m long cable from the spreader to the control panel.Electrical components waterproof. ~ ~With the AUTO dose it is possible to dose depending on the speed. The control automatically sets the slide opening that matches the speed being driven and adjusts this when the vehicle accelerates or slows down so that the set application rate is constantly maintained.The basis for this is the spreading tables we store in the control panel. There are 12 spreading tables to choose from. Please contact us so that the spreading tables you require can be stored on the control panel supplied.AUTO dose via 7-pin socket:The speed driven is shown here The 7-pin signal socket on the tractor has been removed. In addition, this variant contains the above-mentioned headland manager via the signal socket.

Container capacity 170 liters.The 12 volt spreader for slug pellets, grasses and catch crops, as well as mouse bait.Stepless spreading width from 2-24 mThe stepless Adjustable speed of 200-3000 rpm enables working widths from 2 m to 24 m. The spreading width of course depends on the spreading material to be spread.Transverse distribution: To correct the spreading pattern, more to the left or right, the throwing blades can be infinitely adjusted up to the spreading pattern is set in the middle. Operation on the control panel from the driver's seat.All switching functions can be operated and monitored from the tractor via the control panel. Spreading disc on/off Slider open/closed Continuous dosage of the spreading quantity.The slider is position-monitored and gives a visual and acoustic error message if the position is not reached.Advantage >: Application rate can be changed while driving.Automatic start 10 times when the grit is shaken.If grit gets stuck on field paths, it can happen that the motor blocks and the next time it starts not running. The automatic start system then repeats the starting process up to ten times and tears the blocked agitator shaft free. If the blockage is not cleared after ten attempts to start (foreign body), an acoustic and visual message appears on the display. Slider and spreading plate made of stainless steelSpecial stirring shaft for grassTransparent storage container with outlet opening for complete emptying.Standard scope of deliveryIncludes empty indicator - visual and acoustic signal when the container is empty.Robust 12 V electric motor, 300 W power supply cable 4 mm to the battery6 m long cable from the spreader to the control panel.Electric components waterproof

Container capacity 170 liters.The 12 volt spreader for slug pellets, grasses and catch crops, as well as mouse bait.Stepless spreading width from 2-24 mThe stepless Adjustable speed of 200-3000 rpm enables working widths from 2 m to 24 m. The spreading width of course depends on the spreading material to be spread.Transverse distribution: To correct the spreading pattern, more to the left or right, the throwing blades can be infinitely adjusted up to the spreading pattern is set in the middle.Operation on the control panel from the driver's seat.All switching functions can be operated and monitored from the tractor via the control panel.Spreading disc on/off slider on/off for continuous dosing of the spreading quantity.The slider is position-monitored and gives a visual and acoustic error message if the position is not reached.Advantage: The application quantity can be changed while driving. Automatic start 10 times if the grit is shaken.If grit gets stuck on field paths, it can happen that the motor blocks and does not run the next time it is started. The automatic start system then repeats the starting process up to ten times and tears the blocked agitator shaft free. If the blockage is not resolved after ten starting attempts (foreign bodies), an acoustic and visual message appears on the display.Slider and spreading plate made of stainless steelSpecial agitator shaft for grassTransparent storage container with outlet opening for complete emptying of residues.Standard Scope of deliveryIncludes empty indicator - optical and acoustic signal when the container is empty.Robust 12 V Bosch electric motor, 300 W power supply cable 4 mm to the battery6 m long cable from the spreader to the control panel.Electrical components waterproof. ~ ~With the AUTO dose it is possible to dose depending on the speed. The control automatically sets the slide opening that matches the speed being driven and adjusts this when the vehicle accelerates or slows down so that the set application rate is constantly maintained.The basis for this is the spreading tables we store in the control panel. There are 12 spreading tables to choose from. Please contact us so that the spreading tables you require can be stored on the control panel supplied.AUTO dose via 7-pin socket:The speed driven is shown here The 7-pin signal socket on the tractor has been removed. In addition, this variant contains the above-mentioned headland manager via the signal socket

Our light material bucket can transport perfectly free-flowing bulk materials such as wood chips, sand, grain and commercial fertilizer. The depth of 1000mm allows for a large volume.The conical design without a central bar allows the bulk material to slide off optimally. With the different widths of the light material bucket, they can be optimally adapted to the width of the tractor/tug truck. This makes work easier when pushing snow or loading in tight spaces.The light material shovel has skids to protect the base of the shovel. The completely welded shovel made of high-quality steel with a thickness of 6 mm is protected against wear by a hardened scraper edge 500 HB. Two permanently welded perforated plates make it possible to mount all common front loaders, wheel bearings, telehandlers or yard loaders. This means that if you change the carrier vehicle later, you can change the mount without much effort.Please order the mounts according to your carrier vehicle!Steel sheet with 6 mm thickness , powder-coatedwith perforated plate holder for front, telescopic or wheel loadersconical design for better slipping of the bulk materialhardened scraper edge HB 500

​Weld-on eye suitable for Euro front loader attachment, quick-change Euro attachmentHole for bolt/shaft with approx. 22 mm diameter.

favorable center of gravity thanks to compact design robust thanks to thick-walled side plates and wear plate under the lower tine carrier screwable forged tines, tine length 800 mm

The Mini loader bucket with perforated plate holder for farm loaders is suitable for universal use on any farm. Due to their similarity to light material shovels, the shovels offer a lot of volume despite their compact dimensions. Thanks to the wear plate under the shovel base and the scraper edge made of hardened steel 500 HB, the Mini loader shovels are very robust.Screwable perforated plate holderStable scraper edge made of hardened steel 500 HBWear plate under the blade base Scope of delivery: as shown, without mounting bracket

The Mini multi-grab bucket with perforated plate holder for yard loaders is suitable for loading loose or bulky loads. Loading and transporting manure, loose straw, green waste or shrub cuttings can be carried out without causing major contamination of the transport route. The screwed side panels also prevent loss of loads. The robust design with a blade plate thickness of 6mm, skids under the blade base and a cross tube on the top edge ensures high stability and a long service life.favorable center of gravity close to the carrier vehicleSliding skids on the bottom of the shovelScraping edge made of hardened steel 500 HBThick-walled side plates, 10mm thickScope of delivery: complete with hydraulic hoses and connectors BG3, screwed-in side plate, without recording consoles.

The Mini silage tongs with perforated plate holder for farm loaders are often used as a universal work tool due to their robust design. The tongs enable you to hold and tear out silage and manure. The silage tongs are ideal for transporting manure, straw, green waste and shrub cuttings.favorable center of gravity close to the carrier vehiclewear plate under the lower tine carrierscrewable forged tines at the bottom, length 800mmthick-walled side plates Scope of delivery: complete with hydraulic hoses and BG3 connectors, without mounting consoles.

For coupling front and rear implements, material fine-grain steel QSTE380 (St52-3). Made from frame profiles 60x60x5mm.

For coupling front and rear implements, material fine-grain steel QSTE380 (St52-3). Made from frame profiles 60x60x5mm.

For coupling front and rear implements, material fine-grain steel QSTE380 (St52-3). Made from frame profiles 60x60x5mm.

For coupling front and rear implements, material fine-grain steel QSTE380 (St52-3). Made from frame profiles 60x60x5mm.

For coupling front and rear implements, reinforced version.

The Schneider multi-grab shovel for universal use is suitable for loading shrub cuttings, manure or other loose or bulky loads. The screwable side covers prevent loss of loads. The multi-grab bucket is available for front loaders such as telescopic and wheel loaders with the new perforated plate holder for a wide range of vehicles (order attachment brackets separately). The high opening width means that the edge of the bucket can be moved up to a wall when the gripper is open.Bucket plate 8 mm thick, without side plates, plug BG3, double scraper edge 500 HB, bottom of the bucket with skids, 1,100 mm high