Attachments and accessories

With the perforated plate (LP) holder, all common front loaders, wheel loaders, telescopic or yard loaders can be combined with our attachments.We supply the attachments from the factory with two firmly welded perforated plates. The specific mounts for the carrier vehicles are simply screwed to these. When ordering a corresponding attachment, please specify the type of relevant telescopic, yard or wheel loader.Delivery: 1 pair and screw set

With the perforated plate (LP) holder, all common front loaders, wheel loaders, telescopic or yard loaders can be combined with our attachments.We supply the attachments from the factory with two firmly welded perforated plates. The specific mounts for the carrier vehicles are simply screwed to these. When ordering a corresponding attachment, please specify the type of relevant telescopic, yard or wheel loader.Delivery: 1 pair and screw set

with the matching attachment kit for Cat.

Hook 40.5mm, locking eye 40.5mm, hole spacing 310mm, 1 pair

Hook 40.6mm, locking eye 41mm, hole spacing 310mm, 1 pair

Hook 40mm, locking eye 31mm, hole spacing 280mm, 1 pair

Hook 40mm, locking eye 42mm, hole spacing 280mm, 1 pair

Hook 50mm, locking eye 50.2mm, hole spacing 435mm, delivered per piece.

Hook 30mm, locking eye 40mm, hole spacing 465mm, delivered per piece.

Base plate with Avant mount

Weld-on coupling plate for attaching tools and equipment to the Schäffer farm loader with connection for shaped tube.

Easy installation for device triangle holder.

For welding to the attachment.

The implement triangle is a mechanical component that is used to attach an attachment to a tractor/tug or other agricultural vehicle on the three-point hydraulics with the attachment triangle. The device triangle is permanently connected to the attachment by welding. The U-profile has the dimensions 74x44x6mm and an internal dimension of 62mm.

Euro mount weldable with a left and a right plate. The hook and eye are welded onto an 8mm thick steel plate. The holder is delivered blank in order to achieve an optimal welding result. The plates must be welded all around, including the square hole at the height of the hook, with a weld seam of 6mm diameter.The maximum load is limited to 2500kg. Delivery includes 1 pair

Clearance adapter from EURO attachment on the front loader to implements with three-point attachment cat. 2. Very robust and lightweight design.The Euro adapter from Schneider makes it possible to use existing implements and implements with category 2 three-point linkage on front loaders with Euro linkage. The short upper top link, which can be used in two slots, and the lower lockable three-point hitches ensure safe handling of the tools and implements with the adapter.Load capacity 1000 kgWeight 50 kg

For coupling front and rear implements, material fine-grain steel QSTE380 (St52-3). Frame profile 60x60x6mm, lower link brackets 20 mm wide.

Simple and quick coupling and uncoupling of implements on Category 2 and 3 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 855 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 59 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg.The quick-change frame in conjunction with hydraulic actuation enables a cost-effective conversion to a fully hydraulically controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.

Simple and quick coupling and uncoupling of implements on Category 2 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg.The quick-change frame in conjunction with hydraulic actuation enables a cost-effective conversion to a fully hydraulically controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.

Simple and quick coupling and uncoupling of implements on category 2 and 3 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg. Hydraulic locking with a double-acting cylinder. Includes 1.5 m hose with connection M18x1.5/12L union nut.

Simple and quick coupling and uncoupling of implements on Category 2 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg. The side locking can be easily converted from the right side to the left side by loosening 2 screws.The quick-change frame in conjunction with a hydraulic actuation enables a cost-effective conversion to a fully hydraulic one controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.

No old iron through the retrofit solution from Faie.Older tractors can often still do valuable work on farms if they are adapted to today's requirements. A simple retrofit solution is to upgrade the mechanical front loader with fully hydraulic device controls. A 1-cylinder version and a version with 2 cylinders are available for this retrofit.If equipment is changed frequently, it makes sense to attach a quick-change frame for coupling and uncoupling the implements with EURONORM. Our complete front loader conversion kit for category 2 front loaders with 85cm and category 3 with 102cm is ideal for this purpose. This consists of a fully hydraulic device actuation in a 2-cylinder design and a quick-change frame with central locking.Pressure force 6927 kg at 180 bar, pulling force 5195 kg at 180 bar, hydraulic hose length 1100 mm and 1300 mm, hydraulic connection M18x1.5 union nut 12L, weight 140kg.

Extremely strong and stable pile shield with hydraulic upper gripper.Extensive application possibilities thanks to the large opening width, the curved gripper arm and the long conical horns. ~Also very suitable for transporting small wood (closes almost completely) and ~ also suitable for transporting round bales to the feeding area. ~Incl. screwed Euro mount, ~double-acting hydraulic cylinder including hoses and hydraulic connector. ~Max. 3 tons load, ~Height min. 792 mm, max. 1178 mm, max. opening 960 mm, width 1200 mm!approx. 190 kg weight. ~

Extremely strong and stable rumble shield with hydraulic upper gripper. Extensive application possibilities thanks to the large opening width, the curved gripper arm and the long conical horns. Also very suitable for transporting small wood (closes almost completely) and also suitable for transporting round bales to the feeding area. Including screwed Hauer B mount, double-acting hydraulic cylinder including hoses and hydraulic connector. Max. 3 tons load, height min. 792 mm, max. 1178 mm, max. opening 960 mm, width 1200 mm!