Adapter set with round tube 82.5mm, locking eye 35mm, hole spacing 352.3mm

from 13-pin. Socket to 7-pin Plug

from 7-pin. Socket to 13-pin Plug

Ideal for retrofitting vehicles without a remote thermometer, for installation in the radiator hose.External thread: M14x1.5mm ~Internal thread: M10x1mm ~

CV, for 1/4", 3/8", 1/2", 3/4", for square drive inserts and ratchets.

Adapter for using Krcher bayonet accessories on Krnzle devices with a D12 connector system.

Add-on shelving with 4 shelves to expand the industrial shelving system. HxWxD: 2000x1000x400mm

The additional control device is a 5/4-way valve, which is operated manually to control hydraulic consumers. It is a four-position control device that can be used for double and single-acting lifting cylinders. It has slide-sealed cylinder ports A and B. This means that extremely low leakage is permitted at high loads. The device has a grid position in the lifting position, which is equipped with a hydraulic-automatic limit switch. If you switch further via the lowering position, the locked floating position is switched on, which is not unlocked hydraulically (consumer connections A and B connected to each other for the return). The floating position can be used as a locked lowering position for both double-acting and single-acting lifting cylinders. The additional control unit can be switched from double-acting to single-acting during operation. The operating lever is included in delivery.

The version is a mobile control block with 2 additional control devices, a switching valve from the original hydraulics to the additional control device and an operating lever for the three-point hydraulics via the additional control device. Installation is carried out using a mounting plate on the hydraulic riser pipe. The two additional control devices can be used double-acting. The outer control spool can be switched from single-acting to double-acting.The functions of the additional control valve are:Lever No. 1, Switching valve from original hydraulics to additional control unit Lever up: normal tractor hydraulic Lever down: work control valveLever No. 2, actuation of the three-point hydraulics without control hydraulics when switching to the additional control unit with lever No. 1, position downLever No. 3, double-acting control deviceLever No. 4, double-acting control device can be switched to single-acting via the changeover tap on the side of the end plate. If the changeover tap is screwed onto the seat, the control slide can be used double-acting. If the changeover cock is turned out to the stop, the function of the control slide is switched to single-acting.The operating lever of the tractor hydraulics/power lift must be in the outer hydraulics position so that the function of the additional control unit is guaranteed. The scope of delivery includes:The screws for attaching to the hydraulic block are included. ~There is also a hose package with 4 hydraulic hoses and matching hollow screws, ~ 4 pieces of clutch sleeves with dust protection and a holder for the clutch sleeves for attaching to the differential housing included. ~

100x400 mm, 1 pack=2 pieces.

Aluminum board 31x15 cm coated with PVC film.

For vehicles that are only approved for certain roads (routes) in accordance with Section 39 Para A circular yellow plate with a diameter of at least 20 cm, a black border and the Latin letter R in permanently legible and erasable black writing must be clearly visible on each of the towing vehicle and the license plate attached to the rear of the last trailer. These boards make it possible to identify vehicles with restricted registration in accordance with Section 39 Paragraph 1 KFG, which makes it easier to monitor compliance with the prescribed route.

Add a personal touch to your preserving creations with our 24-piece set of preserving labels. Specially designed for preserving jars, these self-adhesive labels are the perfect choice for stylishly labeling and decorating your homemade jams, jellies, chutneys or preserves. With enough space for the name of the contents, the date of production and even a personal message, these labels provide everything you need to present your treats in an appealing way.

Adhesive tape made of PP film, sticks well, can be rolled out quietly, width 50 mm, length 66 meters.

Two interchangeable knives, for softwood.

Robust leaf broom, galvanized and adjustable with 1400 mm handle

​Hot-dip galvanised, adjustable pasture gate incl. assembly kit. Extendable from 1.0 to 1.7 m. Height 90 cm. The larger tube spacing complies with the applicable guidelines for keeping horses!The clear widths between the tubes are configured in such a way that horses do not get dangerously caught in the gate and are then unable to free themselvesThanks to the protective distance bar supplied, horses cannot get into the dangerously narrow space between the gate and suspension or jump up and injure themselves

​Hot-dip galvanized, adjustable pasture gate incl. assembly kit. Extendable from 1.0 to 1.7 m. Height 90 cm

​Hot-dip galvanized, adjustable pasture gate including mounting kit.Extendable from 2 to 4 meters. Height 90 cm.The wider spacing of the bars complies with current guidelines for horse keeping!The clear openings between the bars are designed to prevent horses from becoming dangerously entangled in the gate and unable to free themselves.The included safety bar prevents horses from entering the dangerously narrow gap between the gate and the hinges, or from jumping up and injuring themselves.

Adjustable pasture gate with a height of 110 cm. Stable, galvanized steel pipes, each incl. Mounting setconsisting of: 2 hinges, 1 locking option, 6 wood screws (12 x 80 mm). The gate should be able to open inwards towards the pasture!

Adjustable pasture gate with a height of 110 cm. Stable, galvanized steel pipes, each incl. Mounting set, consisting of: 2 hinges, 1 locking option, 6 wood screws (12 x 80 mm).The gate should be able to open inwards towards the pasture!

Adjustable pasture gate with a height of 110 cm. Stable, galvanized steel pipes, each incl. Mounting set, consisting of: 2 hinges, 1 locking option, 6 wood screws (12 x 80 mm).The gate should be able to open inwards towards the pasture!