Occupational safety
Safely protected and always accessible! Ear protection bar with Bluetooth for connecting to your cell phone or listening to music via and AUX input, nylon grille according to EN 1731, battery life up to 38 hours, EN 352, SNR 29.
Optimal protection with a high level of comfort, even in hot weather. Face protection with an extra ear protection bracket that clicks into place, both can also be used separately.
High-quality shoe/boot dryer made of stainless steel. Four curved hangers enable quick drying and ventilation of all types of shoes and gloves. Thanks to its compact design, the Family2 requires very little space. Controlled by a 4-hour wind-up timer. Technical data: Radial fan 65 watts/230 volts. Dimensions: 660x235x370mm HxWxD Weight: 5kg
High-quality shoe/boot dryer made of stainless steel. Four curved hangers enable quick drying of all types of shoes and gloves. Thanks to its compact design, the Family2 requires very little space. Controlled by a 4-hour wind-up clock. Technical data: 20 watts/230 volts. Dimensions: 660x235x370mm HxWxD Weight: 5kg
Professional boot/shoe dryer made of stainless steel. Warm air dries shoes and gloves in just a few minutes and removes sweat odors. Up to 4 pairs of shoes in one go. Thanks to its wall mounting and compact dimensions, the Family4 takes up very little space. Top features include a 24-hour timer and a 4-hour wind-up clock. Technical data: 130 watts/230 volts Dimensions: 660x580x370mm HxWxD Weight: 10 kg.
Protects against moisture and cold, sits firmly in the shoe, insulated by honeycomb latex foam. Size 40-47.
Required for use as a combination filter in addition to gas filter A2.
High-quality 3M respirator mask protection level FFP2. High wearing comfort and low heat development due to exhalation valve. Ideal for use in agriculture.
Made of 100% blue nylon, seamless, with double nitrile coating, 1st layer waterproof, completely, dipped in blue, 2nd layer palm and fingertips with black, sanded and foamed nitrile, waterproof design, therefore ideal for wet areas, washable, safer Wet and dry grip, special wearing comfort, perfect fit, ideal for assembly work, warehouses, logistics and craft sectors, outer material: 100% nylon with double nitrile coating, standards: EN 388 CAT II
Seamless, lightweight universal glove with PU nitrile coating. Very good fit and high wearing comfort.
SCHÜTZE-ANATOMIC-3D-INSOLEReplaceable footbed insole with ball heel and pronounced flat foot support - anatomically shaped, moisture-regulating, breathable & washableOptimum standard insole for normal feet.
Innovative professional head protection combination with optimal weight distribution.Head circumference can also be adjusted while wearing using a twist lock.Ventilation openings distributed over the entire helmet shell. Metal visor with higher light transmission than nylon visors and less optical irritation.Reflective stickers all around ensure increased visibility.Adjustable hearing protection. (SNR 27). Hearing protection capsule in a slim design.EN 352, EN 397, EN 1731, KWF Profi!Weight 830 grams.
Cut protection boots made of natural rubber with soft, adjustable shaft end, ~cut protection inlay and reinforced, stable heel protection >, non-slip and acid-resistant nitrile rubber sole, with steel toe cap , cotton lining, KWF tested, cut protection class 3 , wide fit, sizes: 40-47.The safety shoes are certified according to EN ISO 20345 SB E SRA/EN ISO 17249 and therefore meet the highest safety standards for forestry work. They have a ~ Class 3 cut protection insert (28 m/s), ~ a steel toe cap, ~ an oil-resistant ~and acid-resistant ~outsole made of nitrile rubber. ~The shoes are made of natural rubber and have an olive green color with orange accents.The shaft height is approx. 37 cm and the shoe width is extra wide. ~The shoes are available in sizes 40 - 47.Here are some of the advantages These safety shoes:They offer a high level of protection against cuts, bruises and chemicals.They are comfortable to wear and offer a good fit.They are made of high quality Materials made and durable.They are certified to the highest safety standards.If you are looking for a pair of high-quality safety shoes for forestry work, these shoes are a good choice.You offer a high level of protection and are comfortable to wear.
With latex coating on cotton jersey and good wearing comfort, back of hand partially coated, elastic knitted cuff, Cat. 2 glove for general work with medium risks. Size 10.
Lightweight forestry helmet with large nylon visor. Elastic visor seals on the helmet peak to prevent dirt from entering. Hearing protection capsules in a slim design with very good noise insulation. Ventilation openings in the upper area of the helmet chamber. Screen as glare protection. Pin-lock closure for easy adjustment of the headband. Complies with EN 352, EN 397, EN 1731. The standard ventilation reduces the temperature by two to three degrees and the humidity decreases by 50 percent. The flexible nylon protective grille reduces the risk of breakage and increases service life. Average light transmission. Please note: Face protection cannot replace eye protection (safety glasses).
Keeps your feet cool and dry!Inserts in particularly stressed areas to prevent redness, wounds and blisters.Optimum foot climate and moisture transport thanks to Coolmax.Material 68% nylon, 30% polyester (Coolmax), 2% Elastane.Size: 39/42, 43/46.
Protective helmetmade of UV-stabilized ABS. Patented UV indicator indicates when the protective helmet needs to be replaced due to excessive UV exposure. With 4-point webbing interior, the helmet attachment can be rotated 180 so that the umbrella can also be worn at the back and offers even more upward visibility. The headband with ratchet closure system ensures precise and easy adjustment to the wearer's head size.Other technical features:Head circumference: 53-62cm< /li>Standard: EN 397 Weight approx.: 310g
Version: (only for full masks) organic vapors, inorganic and acidic gases, ammonia and derivatives, mercury vapors and formaldehydes and solid and liquid particles (factory code 6099)Standard: EN 14387:2004 + A1:2008PPE category: IIIrequires testing: yesper piece
Version: Replacement filter for use with weedkillers or pesticides, chemical cleaning agents or solvent-based paintsABEK1 protection against organic vapors, inorganic vapors, acid gases, ammonia and its derivatives(factory reference 6059)Use with reusable masks of the 6000, 6500 and 7000 series from 3MStandard: EN 14387:2004+A1:2008 ABEK1
Seamless, cooling assembly glove with Thermatech fibers, moisture is transported away from the skin and thus ensures a cool, comfortable wearing experience, especially for touch screen operation thanks to copper fibers in both index fingers and thumb, with a nitrile coating with a sandy finish, optimal dexterity and a secure grip, even with smooth objects. Material: 98% nylon, 2% elastane. Areas of application:Repair workAssembly work Precision workCarpentry workMotor vehicle workPentin workInstallation workWorkshop workStorage work< /li>Primary protection against: Dirt Mechanical risks according to EN 388 - Performance levels
Seamless, cooling assembly glove with Thermatech fibers, moisture is transported away from the skin and thus ensures a cool, comfortable wearing experience, especially for touch screen operation thanks to copper fiber in both index fingers and thumb, breathable nitrile microfoam coating and nitrile nubs on the palm of the hand , optimal dexterity.Material: 98% nylon, 2% elastane.Areas of application:Repair workAssembly workPrecision workCarpentry workMotor vehicle workPlumbing workInstallation workWorkshop work< li>Storage work Primary protection against: Dirt Mechanical risks according to EN 388 - performance levels
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.