Pigs

Made of stainless steel, with very small bar spacing for as little feed loss as possible. For mounting on the wall, very good quality and workmanship!Dimensions: H x W x D: 61.5 x 38.8 x 26.0 cmInside bar spacing: 18 mm

With two welded stainless steel holders and a 1/2? drinking outlet, bent at 30,

Straw rack for species-appropriate pig farming, but also suitable for calves, goats or sheep! Thanks to the integrated tray in the lower part of the rack, less straw or hay ends up on the floor or in the floor gaps. Width: 57 cm at the bottom, 65 cm at the top. Height: 65cm. Contents: 60 l.

Rack for roughage, for sheep and goats, but also for calves or pigs. (W x D x H) 98 x 36 x 52 cm

​Raising healthy and numerous animals is always a major challenge in pig breeding. It is essential to provide all piglets in a litter with a stable temperature level, adapted to their age. To ensure that the piglets remain healthy from the start and gain weight daily, a temperature of 30 to 35 °C is assumed for newborn piglets. From the 2nd to the 4th week of life, the temperature requirement drops to approximately 26°C. SunnyBoy radiant heaters are precisely tailored to these natural requirements: The more even heat distribution creates a larger comfort zone (30–35°C or 26°C) and thus an optimal nesting environment for all piglets. The advantages:Large comfort zone and therefore an optimal nesting environment for the entire litterLess stress for the pigletsBetter and more homogeneous development of the newborn piglets ensures a healthy herdEfficient operation due to shorter overall operating time and possible power reduction of the deviceThe optimized nesting environment allows the barn temperature to be reduced and thus adapted to the needs of the sowsQuick and easy cleaning with a pressure washer (protection class IPX7)Low maintenance costs due to long service life and the elimination of replacing defective infrared lampsHousing made entirely of stainless steelIncludes red lightSupplied without plugTechnical data:Power: 150 wattsProtection class: IPX7Operating voltage: 220–240 V AC / 50 HzDimensions: 50 x 22 x 7 cmCable length: 2.5 m

Allows the power of the radiant heater to be reduced. Suitable for the Sunny Boy 100 W heat radiation device, order no. 50001 and 150 W order no. 50002

Swiveling refreshment for your animals! Galvanized swivel arm extendable from 120 to 230 cm. 1/2" quick-connect fitting. 7 m water hose. Adjustable spray nozzle.

Made of stainless steel, for pipes of 3/4"~ to 1"~. With 1/2" connection thread.

Made from food-grade, naturally renewable raw materials. Polylactic acid obtained from sugar cane, reinforced with wood fibers. Organic, changeable and health-safe activity material. Long service life, biocompatible, biodegradable, GMO-free, selected, HACCP-compliant hardwood from certified, sustainable forest management. Suitable for fattening pigs, 7.5 cm, WITHOUT hanging chain.

Brass drinking nipples for bulls, sows and fattening pigs. Water flow can be regulated!Projection: 97 mmConnection: external threadWater output: 2.3 l/min at 5 barWeight: approx. 385 g

Tipping trough suitable for WaterLevel valve. With fittings.

Made of stainless steel, with metal handle and 2 cannulas

Drinking nipple for pig feeders. Suitable for piglets and fattening. 1/2" FEMALE THREAD. Total length 93 mm. Pin Ø 11 mm. For detailed drawing see downloads.

Drinking nipple for pig feeders. Suitable for piglets and fattening. 1/2" FEMALE THREAD. Total length 80 mm. Pin Ø 7.8 mm. For detailed drawing see downloads.

?Trough sprayer with slot. 1/2" AG. Water delivery: at 1 bar 3.5 l/min at 2 bar 6.2 l/min at 3 bar 7.2 l/min at 8 bar 8.0 l/min

For weaned piglets (7 to 30 kg) but also for keeping sheep or lambs. Suitable for feeding.WxHxD: 77 x 26 x 25 cm

Individually adjustable TPX plastic syringe suitable for injection and oral administration.Easy-to-read dosage scale on the cylinderIncremental dosage indicatorSyringe can be boiled for disinfectionIndividually packaged with spare parts kitWith printed fill scale

​Replacement stainless steel spring, compatible with Lister ST7 bite drinkerLister original spare part number 09-0097004 (No. 4 on the parts diagram)

​Brass valve pin with seal, compatible with Lister ST7 bite drinkerLister original spare part number 09-0105005 (No. 5 on the spare parts diagram)

Angle 15, stainless steel holder, 1/2"" 1/2", hole spacing 55 mm, diameter 9 mm.

Angle 45, stainless steel holder, 1/21/2. Hole spacing 55 mm, diameter 9 mm.

Angle 30, stainless steel holder, 1/23/4, hole spacing 60 mm, diameter 9 mm.

Angle 30, stainless steel holder, 3/43/4, hole spacing 60 mm, diameter 9 mm.

Fits automatic feeder 131704. Made of stainless steel.