Livestock farming

Thanks to its natural combination of active ingredients, it makes it easy to comb through the horse's hair and lets it and the fur shine with a new, silky shine. Contents: 500 ml

​Specifically designed for use with float valvesSuitable for water storage tanks, reservoirs, and troughs made of plastic or concreteFor professional installation in the tank wall, connecting the supply line and float valveMade of high-quality, glass-fiber-reinforced nylon, corrosion-resistant, durable, and reusableUV-stabilized for indoor and outdoor use, as well as above- and below-ground applicationsWith G 3/4" male and female threadsMale thread length 200 mm, can be shortened

Replacement collecting container for the horsefly trap TaonX and TaonX Eco (order no. 66485 and 22971).

The Eco version of the successful TaonX horsefly catcher (FAIE order number 66485)! For everyone who has smaller areas to protect or if floor mounting is not an option or possible!Each trap reduces up to 95% of the horseflies in the immediate area and has a maximum effective area of approx. 5,000 m !Absolutely non-toxic and environmentally friendlyEasy to set up and hang on trees or similar using the included link chain2 year guarantee on metal parts< li>Diameter of umbrella: approx. 1.10 mScope of delivery: ball incl. pump and textile strap, textile umbrella, stranded wire to stretch the umbrella, collecting container including lid, galvanized container holder including straps and carabiners, 3-part Textile strap with carabiner and link chain 100 cm for hanging the trap, operating instructionsWall mounting angle iron can be ordered separately (FAIE order number 22975)How the trap works: The ball heats up and thus simulates the trap Slow down a target to suck blood. After an unsuccessful attempt to ingest blood, the insect takes off upwards and sees the catch container as the only supposed way out.

The proven horsefly trap as a mini version for up to 100 m outdoor areas. Due to its small dimensions, TaonX Mini is extremely easy to install anytime, anywhere. You just have to make sure that the trap is not hung higher than 180 cm and not lower than 100 cm (bottom edge of the ball).Ideal for riding stables, in gardens but also on campsites, golf courses and parks, can be installed quickly and safely in just a few steps . Can also be used as a wasp trap with a wasp attractant! Each trap reduces up to 95% of horseflies in the immediate area and has a maximum effective area of up to 100 m! Absolutely non-toxic and environmentally friendly, easy to assemble, weight: approx. 1,545 g, diameter of umbrella: approx. 35 cm.

​For steep pathsMONTA was specially developed for steep paths. The V-shaped, raised ribbed profile provides the claw with grip and also helps liquids to run off. The square embossing between the ribs provides additional grip. The mat has proven itself in practice on slopes of up to 15%. It can be walked on in both directions. It is also very suitable for use on stationary, concreted loading ramps for transporting animals to and from the site.Mat length 200 cm, 2 different widths, thickness 24 mmCan be driven on up to a maximum gradient of 10% with standard equipment, such as farm loaders or tractors

Made of stainless steel, for pipes of 3/4"~ to 1"~. With 1/2" connection thread.

With cross holes for calf drinking buckets.Installation tip:+ = correctx = incorrect

Length 100 mm, with cross holes, for calf drinking buckets.

The ultimate two-component adhesive for professional use in modern hoof care. Practical disposable cartridge, 25 ml, for all those who do not want to work with large cartridges due to the low demand. The blue color immediately indicates the correct mixture when pressed. The new recipe has been optimized in terms of the parameters of curing speed, viscosity and degree of hardness after polymerization compared to the two-component adhesives available on the market. The glue becomes glass hard and adheres optimally to the claw and block, the flowability of the glue mixture has been adjusted so that it can be worked at both 45 and 90 angles, the claw is fully resilient again after approx. 2 minutes (at correct storage above 15 C), adheres strongly and permanently to wooden and rubber blocks. The 25 ml content is designed specifically for one-time use~ the matching mixer cannula is already integrated into the airtight packaging! Important: The adhesive should be stored under uniform conditions at approx. 15 - 20 C (summer and winter) to achieve an optimal result.

Inkl. Beschleuniger! Durch niedrige Außentemperaturen wird die Aushärtezeit des Klebers bei Klauenbehandlungssystemen mit Klötzchen oder Schuhen generell verzögert. Der Beschleuniger von Technovit bietet den einzigartigen Vorteil, diese sog. Polymerisationszeit bis zu 50 % zu verkürzen. Als Problemlösung in den kälteren Monaten! Der schnellhärtende Kunststoff Technovit 6091 ist durch seine besonderen Eigenschaften ein unentbehrliches Universalhilfsmittelin der Veterinärmedizin bei der Klauenpflege und Klauenbehandlung. In bestimmten Indikationsbereichen unterstützt Technovit 6091 die Therapie des Tierarztes und verkürzt die sonst oft langen Behandlungszeiten wesentlich. In der Klauen- und Hufbehandlung ergeben sich für Technovit 6091 vor allem folgende Anwendungsbereiche: Ruhigstellung von Klauen beientzündlichen Erkrankungen, Fixierung von Klauenspitzen, Abdeckung von Hufdefekten, Hornspalten, Formgebung des Hufes, orthopädische Hufbehandlung, besonders bei Fohlen (Bockhuf, Stelzfuß).Lieferumfang:320 g Pulver160 ml Flüssigkeit4 x Anrührbecher4 x Spatel4 x HolzklötzeBeschleunigerEmpfohlenes Mischverhältnis Beschleuniger : Flüssigkeit+5°C - 1 : 7+10°C - 1 : 10+20°C - 1 : 14

Incl. Accelerator!Low outside temperatures generally delay the curing time of the glue in hoof treatment systems with blocks or shoes. Technovit's accelerator offers the unique advantage of shortening this so-called polymerization time by up to 50%. As a solution to problems in the colder months!The fast-hardening plastic Technovit 6091, thanks to its special properties, is an indispensable universal aid in veterinary medicine for hoof care and hoof treatment. In certain indication areas, Technovit 6091 supports the veterinarian's therapy and significantly shortens the otherwise often long treatment times. In claw and hoof treatment, Technovit 6091 has the following areas of application: immobilization of claws in inflammatory diseases, fixation of claw tips, covering of hoof defects, horn gaps, shaping of the hoof, orthopedic hoof treatment, especially in foals (bock hoof, stilt foot).< br>Scope of delivery:1000 g powder500 ml liquid10 x mixing cups 10 x spatulas 10 x wooden blocks 70 ml accelerator Recommended mixing ratio accelerator : liquid+5C - 1 : 7+10C - 1 : 10+20C - 1 : 14< /li>

For using the Technovit 6091 hoof care items. 500ml

Suitable for approx. 10-12 treatments.

Accelerator for claw adhesive Technovit. Flat 70 ml

The fast 2-component PU adhesive for hoof treatment! With just a small amount of adhesive, you can attach wooden or rubber blocks to healthy hooves in seconds to relieve the diseased hoof after treatment and accelerate healing. Advantages: Dries within 30 seconds, adheres strongly and permanently to wooden and rubber blocks, easy to use – no mixing, no waste, odorless and safe to use even in closed rooms. Contents: 190 ml

​Refill set for Technovit-2-Bond.Consisting of: 1 x 2K adhesive cartridge 190 ml10 x mixing nozzles10 x wooden blocks

​The fast 2-component PU adhesive for hoof treatment! Technovit-2-Bond is a fast-drying two-component adhesive for hoof treatment. With just a small amount of adhesive, you can attach wooden or rubber blocks to healthy hooves in seconds to relieve the diseased hoof after treatment and accelerate healing. The advantages at a glance:Dries within 30 secondsStrong and permanent adhesion to wooden and rubber blocksEasy to use – no mixing, no wasteOdorless and safe to use, even indoorsThe practical Technovit-2-Bond set with dispensing gun includes accessories for approx. 10 applications (depending on claw size and application skill).1 x 190 ml cartridge with 2-component adhesive10 x mixing nozzles10 x wooden blocks1 x dispensing gunIt's so easy to use: Remove the cap from the cartridge and attach the mixing nozzle. Squeeze out a small amount of adhesive. This is necessary to ensure that the two components mix optimally. Now apply a bead of adhesive to the block. Quickly place the block on the previously prepared, clean, dry, healthy hoof. The adhesive hardens after approx. 30 seconds, and the hoof can be loaded again after approx. 2–3 minutes.

Made from food-grade, naturally renewable raw materials. Polylactic acid obtained from sugar cane, reinforced with wood fibers. Organic, changeable and health-safe activity material. Long service life, biocompatible, biodegradable, GMO-free, selected, HACCP-compliant hardwood from certified, sustainable forest management. Suitable for fattening pigs, 7.5 cm, WITHOUT hanging chain.

Brass drinking nipples for bulls, sows and fattening pigs. Water flow can be regulated!Projection: 97 mmConnection: external threadWater output: 2.3 l/min at 5 barWeight: approx. 385 g

You can use the temperature measuring probe to monitor the temperature progression in your warehouse. If necessary, you can intervene in good time and prevent storage losses caused by insects and fungi. The piercing lance and the handle are made of stainless steel, the temperature sensor, display and the cabling are located in the stainless steel tube. Ideal for temperature monitoring in hay, straw, grain, wood chips and many other bulk materials. Device data: Lance diameter 16 mm, lance and handle made of stainless steel, built-in LCD display with 10 mm digit height, temperature sensor in the lance tip, measuring range -50 to +110 C , accuracy +/- 1 C, continuous display of the measured value, power supply via battery (1x LR44 incl.). Scope of delivery: measuring device, battery, manual

The gaiter offers optimal protection for sensitive horse legs. Two high-quality elastic strips with Velcro closures ensure optimal adjustment and a secure hold. The impact-resistant hard shell and the shock-absorbing padding reliably protect the leg. (in pairs)

The high-quality care series with an ergonomically shaped handle and rubber slats on the sides enables fatigue-free work and optimal handling. Color turquoise.The curry comb is ideal for removing tangles, dirt and hair knots. The flexible shape adapts perfectly to the contours of the body. Rustproof, blunted wire pins with protective caps, adjustable hand strap.Dimensions (L x W): 13 x 8 cm

Yellow, blank and 3-way adjustable. L x W: 15 x 3 cm. 10 pieces/pack