Pumps, tanks & accessories

Made of brass

Ideal for universal use. Universal pump with approx. 40 l/min. Output at 3400 rpm. Delivery height max. 20m Hose connection 3/4"Self-priming after filling

High-quality professional screw connection

Cost-effective entry-level solution Low-wear centrifugal pump Electric motor 12 V, max. 20 A Self-priming as a submersible pump on the bottom of the container User-friendly, compact, lightweight designVolume flow approx. 25 l/min with nozzle and 4 m hoseExternal dimensions of the pump: length 160 mm, 56 mm

Cost-effective universal pump for diesel/biodiesel, Ad/Blue (separate tap required) or water. The submersible pump can simply be inserted into the bunghole of a 200 l barrel or similar. The standard bunghole adapter ensures a clean and tight connection. Ideal for containers with 2?BSP and S70x6 thread but can also be used universally for other containers.Complete set with pump, 4m hose, 4m cable with switch and pole pliers as well as automatic nozzle for diesel. Technical data: performance. approx. 30 L/min, external dimensions of the pump 160x56mm (LxD.

Charger L2830MS for DT-Mobil Easy 460l and 600l. 220 - 240 VAC, 3A charging current. Charging time approx. 1.5 hours with temperature control and diagnostic function.

Prevents longer suction time. Recommended for all diesel pumps. Connection 1?IG.

This pump is unbeatable in its functionality - a new generation with high performance and low energy consumptionWhether you want to pump out or clean your garden pond, or need to free a construction pit or a flooded basement from water, with this innovative combination pump You can easily pump both clear and dirty water out and around.This pump has a pump volume of 19,500 liters per hour with a maximum delivery height of 10 meters. ~The Flat suction in the clear water mode can extract clear or only slightly dirty water down to 1 mm, so that, for example,a basement room can then be easily wiped dry. ~If the water is dirty, the combination submersible pump is switched off by switching of the operating mode for the dirty water submersible pump. ~The aqua sensor makes it possible to work in narrow shafts and offers a precisely adjustable switch-on and switch-off height. ~Timer functionHousing cover made of stainless steelDrive shaft with ceramic coatingTechnical data:Rated power860 WMax. Flow rate19500 l/hMax. Pressure1.0 barMax. Immersion depth7 mMax. Delivery height10 mMax. Media temperature35 CCable length10 mConnection cableH07 RNFProtection classIP X8

Key suitable for all couplings of sizes A/B/C. Easily release clutches with little effort.

​Ideal for draining garden ponds, pools, or flooded areas. 2-in-1 pump for pumping dirty water up to a grain size of 35 mm and switchable to "wipe-dry" clear water with one hand (not for continuous operation). Flow rate 16,500 L/h, discharge head 9 m (0.9 bar). One for all.Adjustable float switchThermal protectionNoryl impellerMotor: 750 watts/230 volts10 m connection cableMechanical sealStainless steel shaftSuitable for dirty and clear waterGrain size for dirty water: 35 mmGrain size for clear water: 1 mmHose connection:1 1/2" female thread, 1 1/2" male thread, 32 mm, 1" male thread, 25 mm

Practical universal pump for clear and dirty water. Thanks to the different suction baskets, this pump can be used for dirty water up to grain size 30mm as well as flat suction (not in continuous operation) up to 1mm. Technical data: Motor 750W / 230Volt, delivery rate max. 15900 L/h, delivery height 8.5m, connection thread 5/4 female. Complete with variably adjustable float switch and 5/4? ~ ~/ 1? hose connection.

​Hose set with 1.5 m length DN19 electrically conductive hose suitable for petrol, incl. steel outlet elbow, 90° connection bend and 500 mm earthing cable with crocodile clip for petrol drum pump.

Connection set for 750 and 1000 L uni-tanks for filling with tank trucks. Complete with TW coupling, vent line and limit indicator.

For connecting a drinking bowl to an IBC tank. including flexible armored hose 70 cm.Scope of delivery:1 x armored hose 70 cm (connection 2 x 3/4" female thread)1 x adapter for IBC container incl. seal (S60x6 to 3/4" male)1 x reduction straight 3/4" male to 1/2" female 1 x double nipple 1/2" male to 1/2 "AG1 x double nipple 3/4AG x 3/4AG

Intake pipe approx. 130 cm. Complete with check valve and coupling part for direct connection to all farm filling stations with 1? thread.

Intake pipe approx. 140 cm. Complete with check valve and coupling part for direct connection to all farm filling stations with 1? thread.

This set allows you to easily connect the diesel pump to the tank. This allows you to easily mount the pump on a wall or similar in the desired position. Hose length 2m. The connection set is delivered in individual parts so that you have the opportunity to adapt the hose length individually to your needs.

Counter suitable for all common diesel pumps with daily and total counters. Deviation +/-1%, flow rates max. 120 L/min, connections 1 inch female thread, temperature range -20 to +50C. Dimensions: 220x150x220mm, weight 2.2kg.

With 2? external thread for attaching to the tank as well as a 1? external thread for mounting the pump and a 1? internal thread for the suction line. 360 rotatable. ~

For better protection in bad weather, can be attached on both sides.

Made of sturdy steel housing, smooth-running hand crank drive with high performance (approx. 30 L/min), diving depth up to 980 mm. Suitable for diesel/heating oil, engine oil, gear oil (SAE75-90) and cutting oil. Complete with barrel screw connection G2? (200 L barrels) and outlet elbow 1?.

High quality crank pump developed and manufactured by Pressol. Smooth turning operation thanks to high-quality components and an optimal gear ratio. Delivery line at 60 revolutions approx. 18L/min (diesel). Suitable for self-lubricating, non-aggressive media such as heating oil, diesel, petroleum and oils up to SAE90. The telescopic suction tube (355 - 955mm) makes it ideal for use with 60/200 and 220L barrels. Complete with outlet elbow and barrel screw connection G 2?.

The new benchmark as a crank pumpSolid construction for professional operationHousing made of stainless steel and technopolymerBarrel adapter with connection thread S56x4Multi-part suction pipe 1 m , can be shortened individuallyPVC dispensing hose 3 mStainless steel outlet pipe 19 mm with protective capFlow rate 0.38 l/stroke

Professional hand pump with approx. 22 L/min (0.18 L/revolution) delivery rate. Suitable for all standard 60/200/220 L barrels with G2 thread.Suitable for low-viscosity substances such as water, window clear or AdBlue.