Forestry chains, ropes & winches

Useful aid for home and garden, 80 m, approx. 2 mm .

Radio control with hydraulic control valve!2-channel radio control set for hydraulically driven winches, oil motors or hydraulic cylinders with 12 volt monoblock valve, the radio is pre-wired with a 7-pin vehicle plug , the solenoid valve is double-acting and has a connection for pressure continuation, technical data: 12 volts 3 amps, flow rate max. 50 L/min. Connections: 1/2?IG inlet/output and consumer<~cbht/>~1/2?AG to continue printing

Crane winch, auxiliary winch with gear reduction for higher pulling power, the reduction is loosened to be pulled out. The winch is pre-assembled in a metal housing - simply connect it to a double-acting control device.For mounting on cable winches or forwarding wagons, a forestry crane , forwarding tongs or pile shield. Can be used for anything that needs to be pulled.For mounting on winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 1400 kg pulling force at 175 bar,large drum with 40 meters of 6 mm wire rope with hook,The rope speed is 0.45 meters / second at 40 liters/min. Connections: 3/8?AG/IT..

​Crane winch, auxiliary winch with gear reduction for higher pulling force, the reduction is released for pulling out.The winch is pre-assembled in a metal housing - simply connect to a double-acting control unit.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Can be used for anything that needs to be pulled.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Many Kesla and Patu cranes already have the appropriate attachment holes!Max. 1700 kg pulling force at 175 bar,Large drum with 35 m 8 mm wire rope with hook,The rope speed is 0.36 metres / second at 40 l/min.Connections: 3/8 inch AG/IG.

​Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling force. The gear reduction is released for pulling out.The winch is pre-assembled in a metal housing - simply install in a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation,Valve with built-in pressure transfer line and extra return line,max. 50 l/min flow rate, max. 175 bar, connections 1/2 inch female thread, pressure transfer 1/2 inch male thread.Dimensions of the winch housing: 40 x 25 x 20 cm.Can be used for anything that needs to be pulled.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Many Kesla and Patu cranes already have the appropriate attachment holes!Max. 1400 kg pulling force at 175 bar,The rope speed is 0.45 metres / second at 40 l/min.Large drum with 40 m 6 mm wire rope with hook.Complete set with hoses and HY plug,Electro-magnetic valve with professional radio unitpermanently wired with 7-pin vehicle plug.

Crane winch, auxiliary winch with gear reduction for higher pulling power, the reduction is released to be pulled out.The winch is pre-assembled in a metal housing - simply connect it to a double-acting control device.For mounting on cable winches or forwarding wagons, a forestry crane , forwarding tongs or pile shield.Dimensions of the housing: 40 x 25 x 20 cm.Can be used for anything that needs to be pulled.For mounting on winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 2200 kg pulling force at 175 bar,large drum with 35 meters of 8 mm wire rope with hook,The rope speed is 0.36 meters / second at 40 liters/min.Connections: 3/8?AG/ IG.

The light and compact auxiliary winch for mounting on cable winches or forwarding tongs, log splitters or even on a pole blade, ATV or small forwarding vehicle. The winch is pre-assembled on a plate with fasteners that can be easily mounted to your device. This crane winch is a robust construction and made for demanding use in the forest. Simply connect to a double-acting control device. Can be used for anything that needs to be pulled.Compact crane winch - easy and quick assembly.The maximum pulling force is a full 700 kg at a maximum of 175 bar.The rope speed is 1.2 meters / second at 40 liters/min.Connections: 3/8?AG/IG.Dimensions of the winch approx. 24 x 24 x 15 cm, holding plate with 2 x 17 mm holes with 70 mm hole spacing.<~cbht />~Drum: 60 mm inner and 150 mm outer diameter, 50 mm wide.Winch We-700 with bracket and 20 meters of 5 mm wire rope.

Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling power. The reduction is released to pull it out.The winch is pre-assembled in a metal housing - simply install it into a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation, <~cbht />~Valve with built-in pressure transfer and extra return, <~cbht />~max. 40 liters/minute flow, max. 175 bar, connections 1/2?IG, pressure continuation 1/2?AG.<~cbht />~Dimensions of the winch housing: 40 x 25 x 20 cm. Can be used for anything that needs to be pulled.For mounting on cable winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes ! Max.1700 kg pulling force at 175 bar,The rope speed is 0.36 meters / second at 40 liters/min.large drum with 35 meters of 8 mm wire rope with hooks. Complete set with hoses and HY plug, electro-magnetic valve with professional radio unit >Fixed wired with 7-pin car plug.

Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling power. With freewheel for pulling out the rope.The winch is pre-assembled in a metal housing - simply install it into a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation,Valve with built-in pressure transfer and extra return ,max. 40 liters/minute flow, max. 175 bar, connections 1/2 Zoll IG, pressure continuation 1/2 Zoll AG.Dimensions of the winch housing: 40 x 25 x 20 cm.Can be used for everything What needs to be pulled can be used.For mounting on cable winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 2200 kg tensile force at 175 bar,The rope speed is 0.29 meters / second at 40 liters/min.Large drum with 35 meters of 8 mm wire rope with hook.Complete set with hoses and HY plug,electro-magnetic valve withprofessional radio unitwith 7 -pin vehicle plug permanently wired.

The light and compact auxiliary winch with radio control, for installation on cable winches or forwarding tongs, log splitters or even on a pole blade, ATV or small forwarding vehicle. The winch is pre-assembled on a plate with fastening elements that can be easily attached to your device can be mounted.This crane winch is a robust construction and made for demanding use in the forest.It is operated via radio on a 12 V control valve with additional manual operation. Control valve: 12 volts Simply install solenoid valve into a hydraulic circuit<~cbht />~Valve with built-in pressure transfer and extra return,<~cbht />~max. 40 liters/minute flow, max. 175 bar, connections 1/2?IG, pressure continuation 1/2?AG.The maximum tensile force is a full 700 kg at a maximum of 175 bar.The rope speed is 1 .2 meters / second at 40 liters/min.Dimensions of the winch approx. 24 x 24 x 15 cm, holding plate with 2 x 17 mm holes with 70 mm hole spacing.<~cbht />~ Drum: 60 mm inner and 150 mm outer diameter, 50 mm wide.Winch We-700 with bracket and 20 meters of 5 mm wire rope.Can be used for anything that needs to be pulled . Complete set with hoses and HY plug, electro-magnetic valvewithprofessional radio unitwith 7-pin car plug< /strong> permanently wired.

Standard length 3 m (+adjustment range), with 2 safety load hooks and a parallel hook for shortening the chain.

two-part system,3 meter long lashing chain with two fork-head load hooks and fuses,extra ratchet tensioner with two parallel hooks with fuses,with test tags,EN 12195-3.

Rotating hook with cast safety latch in professional design. New safety load hook with swivel that can be rotated under load - no twisting of the chain, for safe and comfortable work.

​High-strength, curved shackle,with high-strength bolt and lock nut,can also be used for lifting – see load capacity!

High-strength dome hook for hanging into the chain, with large eyelet

Portable Winch PCW portable cordless winch!12-piece forestry set with up to 1000 kg pulling force!PCW 3000-Li is equipped with a 1.0 kW electric motor, suitable for spiral-braided plastic ropes with a diameter of 10 - 12 mm, 8.1 / 10.0 or max. 11.6 metres/minute rope speed, unlimited rope length, Extremely light at only 9.5 kg net weight and can therefore be used anywhere: e.g. for. Tree care work, wildlife rescue, fire brigade or disaster relief operations. UNIQUE FUNCTIONS OF THE PCW3000-Li WINCHAn environmentally friendly pulling winch that requires no maintenance and is always ready for use.With a pulling force of up to 1,000 kg, this winch is very powerful and at the same time very light (only 9.5 kg).The PCW3000-Li can be easily carried to all work sites.It achieves a maximum pulling speed of 11.6 metres per minute and has a maximum runtime of 80 minutes with the 5.0 Ah battery (40 minutes with the 2.5 Ah battery).Even tedious tasks can be completed easily with this winch.THE POWER YOU NEED - THE TOOL THAT'S JUST RIGHT FOR YOUThis winch is perfect for users who have a lot to do outdoors and need to pull loads from time to time,z. For example, homeowners, gardeners, tool freaks, forest owners, hunters, motorsport fans and many others.This winch makes work of all kinds easier.This 12-piece set consists of:1x PCW 3000-Li winch1x 50 m double-braided 10 mm polyester rope1x pulley with 16 kN breaking load1x quick charger1x 82 volt 2.5 Ah lithium ion battery2x screw carabiners1x tree protector 60 mm with 2 m length1x round sling 1000 / 2000 kg, 2.5 / 5 m1x practical rope bag1x RopeWizer rope end piece1x eye hook

Portable rope winch 700 kg pulling force with accessories ~With reliable 35 cm Honda 4-stroke petrol engine, suitable for spiral-braided plastic ropes with 10 - 12 mm diameter, 8 meters/minute max. rope speed, unlimited rope length , with only 9.5 kg weightextremely light and therefore can be used anywhere: e.g. for tree care work, for wildlife rescue, for fire brigade or disaster operations.360 tiltable Honda 4-stroke Petrol enginefor spiral-braided plastic ropesunlimited rope lengthno change in tensile force due to constant roller circumferenceno increased risk of injury due to plastic rope instead of steel rope li>Light and easy to attach with tree protectors Set consisting of: Cable winch PCW 300050 meter double braided 10mm polyester ropeTree protector with 2 loops 60mm with a length of 2 metersScrew carabinerPractical and tear-resistant rope bag small

Portable rope winch ~1,000 kg pulling force with retaining brakeWith reliable 50 cm Honda 4-stroke petrol engine, suitable for spiral-braided plastic ropes with a diameter of 10 - 12 mm, up to 13.4 meters/minute max. rope speed, unlimited rope length, with 12 kg weight ~extremely light and can therefore be used anywhere: e.g. for tree care work, for wildlife rescue, for fire brigade or disaster operations. 360 tiltable Honda 4-stroke petrol enginefor spiral-braided plastic ropesunlimited rope lengthno change in pulling force due to constant roller circumferenceno increased Risk of injury due to plastic rope instead of steel rope light and easy to attach with tree protectors set consisting of:rope winch PCW 4000100 meters of double braided 10mm polyester ropeTree saver with 2 loops 60mm with 2 meters lengthScrew carabinerPractical and tear-resistant rope bag small

Portable cable winch 1000 kg pulling force including tree protectorWith powerful 50 cm Honda 4-stroke petrol engine, suitable for spiral-braided plastic ropes with a diameter of 10 - 16 mm, 12 meters/minute max. rope speed.With Only 15 kg dead weightextremely light and can therefore be used anywhere: e.g. for thinning and tree care work, in construction, for game or vehicle recovery, for fire brigade or disaster operations.Honda 4-stroke petrol engine tiltable up to 45for spiral-braided plastic ropes unlimited rope length no change in pulling force due to constant roller circumference no increased risk of injury due to plastic rope instead of steel rope light and easy to attach with tree protectors 5 year guarantee for private users set consisting of:Rope winch PCW 5000100 meters of double braided 12mm polyester rope2 pieces of tree protector with 2 loops 60mm with 2 meters length2 Piece of screw carabiner Guide pulley with 22kN breaking load Large practical and tear-resistant rope bag

This APW 6000 cordless winch, with a pulling force of up to 1,500 kg, delivers powerful, mobile pulling without the need for a petrol engine. Compatibility with STIHL AP and AllPro batteries allows for flexible use in forestry, tree care and on challenging terrain. The powerful 3.0 kW motor, the MaxGrip™ drum and the precision cable control system ensure smooth cable retraction and reliable power transmission even under heavy loads. Advantages & Features • Pulling force of up to 1,500 kg (Stihl AP500S) – ideal for professional forestry and tree care work. • MaxGrip™ drum and precision cable guide – secure grip and smooth cable feed. • Compatible with STIHL AP and AllPro batteries – cordless operation with existing professional batteries (battery not included). Technical specifications: 1,500 kg pulling force 13 kg weight (excluding battery) Cable speed: 16 m/min. Endless cable length possible Frequently asked questions Are the battery and charger included in the scope of delivery? No, the battery and charger are not included in the scope of delivery. Which batteries is the winch compatible with? The APW 6000 is compatible with STIHL AP and AllPro batteries. What applications is the cable winch suitable for? It is suitable for professional use in forestry and tree care, as well as for pulling and hauling loads.

​Dyneema plastic rope for auxiliary winches on forestry winches.A spliced stainless steel thimble with heat-shrink tubing is fixed as the end piece. The rope has an outer diameter of 4.4 mm, is light and supple, and has an extremely high tensile strength of 2000 daN WLL. Technical data: 4.4 mm outer diameter2000 daN WLL at the spliceStainless steel rope thimbleSupplied on a spool

Perm. Tensile force 2.5t, roller 100 mm, rope max. 10 mm, weight 3.2 kg.

Perm. Tensile force 5t, roller 140 mm, rope max. 14 mm, weight 5.8 kg.

Perm. Tensile force 10t, roller 160 mm, rope max. 16 mm, weight 8 kg.