Switch

External thread: M12x1.5Circuit: normally open

Thread: M12x1.5

Startsperrschalter

Passend zu Massey Ferguson MF135

Passend zu Massey Ferguson 35, 35X

Suitable for Steyr 80,... 55 mm, parking - O - ignition - pre-glow - startincludes 2 pieces. Start keys

Startschlüssel passend zu Zündschloss Lucas

Stepping relays are used where consumers are to be switched on or off using a switch/button, e.g. work lights, seat valves, directional control valves, etc.Ie, if a current is applied to terminal 15 (button pressed once), the relay switches on terminal 87 and holds itself - current on terminal 87 despite releasing the button! When you press the button (impulse) again, the relay switches off again and terminal 87 is de-energized - impulse switch or toggle flip-flop.In the rest position of the relay, terminal 87a is constantly supplied with power and is in one Changeover function with terminal 87.Connections: 30 directly from the battery, continuous positive 87 consumer 1 87a consumer 2, constantly supplied with power over 30 when the relay is in the rest position 31 ground15 of switch/button, switching current 87, 87a changeover function (alternating current on 87 &~ 87a)

Mounting on the steering column

with switch lighting when used with order no. 21735

with switch lighting when used with order no. 21735

with switch lighting when used with order no. 21735

with switch lighting when used with order no. 21735

Version with 4 switching positions ~

with switch lighting when used with order no. 21735

The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function

The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function

Use: for the powershift HL

12/24 V - 120 W, for wall thickness up to 6 mm, 3 flat plugs, switching position: 1-0-2

12/24 V - 120 W for wall thickness up to 6 mm, 2 flat plugs, switching position: 0-1.

With fastening nut, for wall thickness up to 2 mm, 3 screw connections, switching position: 1-0-2.

Installation dimensions (L x W x H) = 44 x 22 x 46 mmfor differential lock, power shift, all-wheel drive, blower, windshield wiper 80, 900, 9000, 9100, CVT series

Installation dimensions (L x W x H) = 44 x 22 x 46 mmfor heating disc, rotating beacon, heating mirror with covered bulb, 9000, 9100 series

Also suitable for Deutz/Steyr, 4 connections with screw terminals, with pre-heating function, installation dimension: 10 mm Connection terminals designation: 15 switched plus from ignition lock 17 starting glow system 19 glow system Pre-heating 50 starting current to starter (magnetic switch)