Electrical system

To lamp holder

To switch

Inner diameter: 60mmGalvanized version

Self-adhesive film, round, 200 mm

16.3 mm, 20 turns, for Steyr Plus

External thread: M12x1.5Circuit: normally open

Thread: M12x1.5

Startsperrschalter

Passend zu Massey Ferguson MF135

Passend zu Massey Ferguson 35, 35X

Suitable for Steyr 80,... 55 mm, parking - O - ignition - pre-glow - startincludes 2 pieces. Start keys

Voltage: 12 VPower: 4.2 kWNumber of teeth (Z): 10 ~Number of mounting holes: 3 ~Diameter ~hole (d): 10.9 mm ~Angle (W): L40 Bolt circle (LK): 127 mmPinion diameter (R): 39.6 mmFlange diameter (D): 89 mmLength (L) : 325 mm ~Length 2 (L2): 240 mm ~Length (L): max. 308 mm ~Reduction gear starter: Yes

Number of mounting holes: 2Diameter bore 12.50.mmDiameter flange 82.50.mm Diameter pinion 34.80.mm Power 2.70 kW Bolt circle 105.00 mm Voltage 12.00 V Angle R50 Number of teeth 9

Number of mounting holes: 2 Diameter bore: (d) 13.50 mm Diameter flange (D) 82.50 mm Diameter pinion (R) 34.80 mm Power 2.70. kW bolt circle (LK) 105.00.mm voltage 12.00V angle (W) R35

Number of mounting holes: 2Diameter of bore (d): 13.50 mmDiameter of flange (D) 82.50 mm Diameter of pinion (R) 41.00 mm Power 3.00 kW Hole circle (LK) 105.00 mm Voltage 12.00 V Angle. (W) R35 Number of teeth (Z) 11

Bolt circle (LK): 105mm Angle (W): R35 Number of mounting holes: 2 Number of teeth (Z): 9 Flange diameter: (D) 82.5mm Pinion diameter :(R) 34.8mm Diameter bore:(d) 12.5mm Power: 3kW Length (L): 340mm Length (L2): 270mm Voltage: 12V

Starter left installation, 12 volts, 2.8KW

​12 Volt, 2.2 KW Total length: 380 mmFlange length: 282 mm Teeth: 11 

Einbau in Fahrtrichtung rechts

Installation on the left

Installation on the right

Startschlüssel passend zu Zündschloss Lucas

Stepping relays are used where consumers are to be switched on or off using a switch/button, e.g. work lights, seat valves, directional control valves, etc.Ie, if a current is applied to terminal 15 (button pressed once), the relay switches on terminal 87 and holds itself - current on terminal 87 despite releasing the button! When you press the button (impulse) again, the relay switches off again and terminal 87 is de-energized - impulse switch or toggle flip-flop.In the rest position of the relay, terminal 87a is constantly supplied with power and is in one Changeover function with terminal 87.Connections: 30 directly from the battery, continuous positive 87 consumer 1 87a consumer 2, constantly supplied with power over 30 when the relay is in the rest position 31 ground15 of switch/button, switching current 87, 87a changeover function (alternating current on 87 &~ 87a)