Skip to main content Skip to search Skip to main navigation
Go to homepage

einfach besser Landwirtschaften

Couplings, ball valves,


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*
€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-25 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)
-33 %

All Products

#FA120395
Sealing set for hydraulic coupling FASTER sleeve BG3 Sealing set for hydraulic coupling FASTER sleeve BG3

Sealing set consisting of O-ring and support ring for hydraulic coupling sleeve BG3 from the manufacturer FASTER. Suitable for the following Faster type series: ANV, NV, VV and VVS.Dimensions for BG3/DN13 pin size plug 20.50mmO-ring: 20.24 x 2.62mm< br>Support ring: 20.60 x 25.0 x 1.0mm

€2.79*
#62587
Sealing set for hydraulic couplings DNP for socket Sealing set for hydraulic couplings DNP for socket
Version: BG4 / DN20

Sealing set consisting of O-ring and support ring for hydraulic coupling sleeve BG3 from the manufacturer DNP.Dimensions for BG3/DN13 pin size plug 20.55mmO-ring: 20.22 x 3.53mm Support ring: 20.55 x 26.80 x 1.0mmDimensions for BG4/DN20 pin size plug 29.10mmO-ring: 28.24 x 2.62mm Support ring: 29.1 x 34.0 x 1.0mm

Variants from €1.65*
€1.99*
#FA46201
Sleeve for multi-coupling Sleeve for multi-coupling

6-pin for electrical cable entry on the device side.

€65.00*
#FA29579
VOSWINKEL Sleeve suitable for Unimog and MB-Trac Sleeve suitable for Unimog and MB-Trac

with zinc die-cast sleeve and push-pull designSleeve with nose M22x1.5 IT

€25.90*
#FA29581
VOSWINKEL Sleeve suitable for Unimog and MB-Trac Sleeve suitable for Unimog and MB-Trac

with zinc die-cast sleeve and push-pull designSleeve with hinged cover M22x1.5 IT

€29.00*
#1198
Stroke limiter Stroke limiter
Series / pipe Ø: 15L Thread: M 22 x 1,5

Stroke limitation of single-acting hydraulic cylinders before the end of the stroke. E.g.: tipping cylinders of truck bodies and agricultural. followers.

Variants from €41.90*
€41.90*
#122416
Faster TARV leakage oil housing with dust cover and 90� leakage oil drain connection TARV leakage oil housing with dust cover and 90� leakage oil drain connection
LA (mm): 68

Faster leakage oil drain housing TARV with different hole spacings with dust caps. The leakage oil drain connection is designed at 90. Colored markings can be ordered separately. You can find these under color clip.

Variants from €19.00*
€19.99*
#FA44725
Tear-off holder DN13 1-fold Tear-off holder DN13 1-fold

Without sleeve, for BG 3 plug-in coupling sleeves with outer diameter 38 mm, including locking rings for attaching the sleeves.

€3.99*
#FA44726
Tear-off holder DN13 2-fold Tear-off holder DN13 2-fold

€7.99*
#FA27063
Tear-off holder for plug-in coupling sleeves Tear-off holder for plug-in coupling sleeves

BG 3/4 hole flange. The sleeve is fixed in the tear-off holder by a spring.

€15.90*
#FA101667
Faster Y-hose connector DN08 Y-hose connector DN08

€2.85*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.