Hydraulic program

The control valve has a directly mounted cross lever control with a joystick handle.Mechanical actuation with spring return in standard version. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Double-acting control slide DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4?

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Single-acting control slide DW: H=Raise, 0=Middle position, S=Lower2. Double-acting control slide DW: H=Raise, 0=Middle position, S=Lower3. Double-acting control slide DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4?

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Single-acting control slide EW: H=Raise, 0=Middle position, S=Lower3. Single-acting control spool EW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4?The switching positions listed depend on the respective model of the control valve. 1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Single-acting control slide EW: H=Raise, 0=Middle position, S=Lower3. Single-acting control slide EW: H=lifting, 0=middle position, S=lowering

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Control slide doubleacting DW: H=lifting, 0=middle position, S=lowering3. Control slide doubleacting DW: H=lifting, 0=middle position, S=lowering4. Control slide double-acting DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow rate max.: 90 L/min. Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4? The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Single-acting control slide DW: H=Raise, 0=Middle position, S=Lower2. Control slide doubleacting DW: H=lifting, 0=middle position, S=lowering3. Control slide doubleacting DW: H=lifting, 0=middle position, S=lowering4. ~Control slide double acting ~DW-SWR: H=raising, 0=middle position, S=lowering, SW-R=floating position lockedStandard version of the valves in parallel connection. Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4? The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 320 barRelief valve set: 150 bar, adjustable from 50-350 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T1, T2: R3/4? H=Raise, 0=Middle position, S=Lowering.The switching positions listed depend on the respective model of the control valve.

Coupling branch for screwing into control valves with M22x1.5 mm internal thread.With this intermediate piece you can attach an additional coupling sleeve to additional control devices with M22x1.5 mm internal thread or connect a line to another hydraulic consumer.

Suitable for Steyr Series 80 with bulkhead thread, M22x1.5 IT.

Suitable for Claas, Renault. Can be coupled under pressure.

Suitable for Valtra. Can be coupled under pressure.

With bulkhead thread for screwing through to existing tractor consoles. Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!

For direct mounting on original adapters suitable for Case, Fiat, New Holland and Steyr. Can be coupled under pressure!

With soft seal for sealing valves with a sealing edge surface.

3-pin DIN rectangular plug (Hirschmann) for directional control valves. Rated voltage AC/DC 250V.

The straight double nipple or BSP adapter is used for screw connections with the same or different internal threads. The adapter is made of steel and has two cylindrical threads of the same or different sizes. The 60° internal cone enables a tight connection with a hose connection with a 60° universal sealing cone.

Made of polypropylene, with 2 clamp halves, welding plate, cover plate and hexagon screw.

​​Vivoil double pump suitable for Deutz and Fendt, and the following Bosch part numbers: 0 510 765 315, 0 510 765 332, 0 510 765 335, 0 510 765 336. Robust and high-performance gear pump for reliable use in agricultural machinery and hydraulic systems. Ideal as a replacement for a faulty original pump. High-quality workmanship and excellent operational reliability. The front section of the pump, with a displacement of 22.5 ccm, is designed to supply the tractor’s hydraulic system. The rear section of the pump supplies hydraulic oil to the steering system.

Particularly suitable for hydraulic cylinders that need to hold large loads in position. Max. pressure 350 bar, control ratio 4:1.

To keep the load in one position without leaking oil! The following functions are achieved:Limitation of the oil flow (even in the event of a line break)Prevents a pulling or pushing load from rushing awayPressure limiting functionUse only possible with control valves that have a consumer tank in the zero position -Connection (floating position) havePressure range 60 to 350 bar., max. load pressure 270 bar, control ratio 4.25:1.

Partial ratio 1:1. The incoming oil flow is divided into 2 equal parts regardless of the operating pressure. If the flow direction changes, the partial flows are added back together. Eg for silo tongs with 2 cylinders. If the silo tongs are filled unevenly, the cylinders are subjected to different stresses. This can be prevented with the flow divider.

​Bolt-øD=20.5 mm, connection P=G 3/8 inch, G=28 mm, F=40 mm, compressive force 2261 kg, tensile force 1378 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=20.5 mm, cross bushing ØD=20.5 mmCylinder Ø C = 50 mmPiston base Ø K = 50 mm