Hydraulic program

Reinforced version with aluminum housing. Tensile/compressive force up to 45 kg. Suitable for cable pulleys with clevis A6x10 mm, bolt 6 mm.

Ergonomically shaped handle for universal use in agriculture. Fastening with an internal thread M12x1.25mm. The cable harness is 900mm long and the individual cables have a cross section of 0.5mm. The protection class of the pushbuttons is IP 67, the handle as a unit has the protection class IP 54.The max. voltage is 0-15V and the max. current is 5A.The temperature range is from -40C to +85C.

Plug complete with dust protection

The innovative, quick overview in the area of hydraulic couplingsWith the Kennfixx color system and the polarity information, the connections can be quickly assigned. Time-consuming mix-ups and material damage are avoided.Easy and reliable installation: Kennfixx can be installed safely and cleanly on all common hydraulic connections in no time at all.Safe and comfortable to use: The diamond-machined surface guarantees a non-slip feel and lasting work safety.High-quality and modern design: Kennfixx is made of aluminum with the highest precision and has a high-quality color anodized finish.Connection thread: G1/2 ?IGScrew-in thread connector: M22x1.5mm

Linksgewinde M36x3, Kat. 3, Bohrung 32mm, Gewindelänge 200 mm, verzinkt. 

The FASTER leak oil container with a capacity of 0.3 litres is attached directly under the last push-pull coupling using the tensioning strap. The supplied seal is fitted between the drain connection of the leakage oil housing and the oil container so that no dirt can penetrate at this point. The drainage oil from the couplings runs into the drainage oil container underneath via the straight drain connection on the FASTER drainage oil housing.

Leak oil container complete with clamp and 1 piece Y-hose connector.Dimensions container Height: 120mm (with screw cap 150mm) Width: 65mm Depth: 100mm

Faster leakage oil drain housing TARV with different hole spacings with dust caps. The leakage oil drain connection is designed at 45. Colored markings can be ordered separately. You can find these under color clip.

Faster leak oil drain housing TARV-3 with dust caps. The distance between the coupling sleeves is 72mm. The leakage oil drain connection is designed at 90.

Lever set for an auxiliary control unit suitable for the Steyr Series 80. The lever set includes all joints, tie rods and lever angles.

Lever set for Deutz DX series from year of manufacture. 1984 to operate the AK control technology additional control devices.

Serves to adapt the pressure to the brake cylinder to the loading status of the trailer. The maximum pressure can be changed via 3 switching positions. Basic setting:max. Flow 30 L/min1. Switch position 40 bar2. Switch position 75 bar3. Switching position 110 barConnections R1/2"~ IGWe would like to point out that the load adjustment valve only forwards the preset maximum pressures in the different switching positions to the brake cylinder in conjunction with a trailer brake valve.

To keep the load in one position without leaking oil! The following functions are achieved:Limitation of the oil flow (even in the event of a line break)Prevents a pulling or pushing load from rushing awayPressure limiting functionUse only possible with control valves that have a consumer tank in the zero position -Connection (floating position) havePressure range 60 to 350 bar., max. load pressure 270 bar, control ratio 4.25:1.

For various types of applications, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are delivered without oil filling. General technical data: ~Input connection: 1 3/8" ~Output connection: 30 h6 ~Reversal of direction of rotation: yes ~Height H: 294 mm  ~Width B1: 110 mm ~Width B2: 215 mmIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

STOPPFIXX maintenance plug set "3 in 1" in red signal color for closing unpressurized lines during repairs and maintenance. Thanks to the 3 in 1 principle, the smallest plug is in the middle plug and these two are then contained in the larger maintenance plug, you always have the right diameter at hand. If the medium size M of the maintenance plugs is in use, the largest STOPPFIXX can be closed with the dust cap and the size S cannot be lost. Due to the adhesive effect, the plugs can be used continuously from 2 - 42mm!Temperature resistant from -45 to +120CSilicone-free, resistant to most oils and chemicals.

According to DIN 2353 and ISO 16028, lightweight series.

Plug, no leakage oil losses!

Oval flange for hydraulic motors of the MM series. Delivery includes 3 countersunk screws.

Mounting kit for connecting DVS directional control valves. Consisting of 4 M8 screws and sealing ring set.

​Mounting kit for Bowden cable actuation for GMS control valves, with 4-hole flange and a bolt circle of ø 45 mm, Supplied without Bowden cable!