Clutches, intake manifolds
Rubber sealing ring for Perrot
B = inner x thickness.
Sealing ring Italian system
B = inner x thickness.
Sealing ring system Bauer
B = inner x thickness.
Side distributor nozzle, spreading width 11 m
With the special side distribution nozzle, the manure fan covers a width of 11 m and hits the ground at a distance of 2 m - 13 m from the center of the barrel. Therefore, there is no path pollution.
Side nozzle 90°
With ball and ring.4 inch = DN100, ball outside diameter D = 130 mm5 inch = DN120, ball outside diameter D = 150 mm6 inch = DN150, ball outside diameter D = 180 mm8 inch = DN200, ball outside diameter D = 243 mm
Side nozzle 90°
With cup and sealing ring.4 inch = DN100, cup width B = 130 mm5 inch = DN120, cup width B = 150 mm6 inch = DN150, cup width B = 180 mm8 inch = DN200, cup width B = 200 mm
Side nozzle with ball, galvanized
3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm
Spray nozzle with ball connection
Without baffle plate.4 inch = DN100, ball outside diameter D = 130mm5 inch = DN120, ball outside diameter D = 150mm6 inch = DN150, ball outside diameter D = 180mm8 inch = DN200, ball outside diameter D = 243mm
Spray nozzle with ball, galvanized
3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm
Suction nozzle ball DN150
Hose connection 150 mm, to quick coupler
Suction nozzle with ball connection
Suction nozzle with ball connection and clamping ring suitable for the Italian system according to the listed nominal widths.4 inch = DN100, ball outside diameter D = 130mm5 inch = DN120, ball outside diameter D = 150mm6 inch = DN150, ball outside diameter D = 180mm8 inch = DN200, ball outside diameter D = 243mm
Suction pipe with 45° elbow and cup, Italian system
The suction pipe has a 45° bend with a welded cup and locking levers. The sealing ring is already pre-installed in the cup. The handle makes the slurry pipe easy to handle. The pipe end is bevelled to ensure optimum suction performance.The suction pipes are supplied in a galvanised version.
Suction pipe with ball and 45° bend
Suction tube with ball and 45° bend with handle. Galvanized version, pipe end cut off at an angle.
Suction pipe with grooves for hose connection
Galvanized, wall thickness 1.2 mm
Content: 2 m (€54.50 / 1 m)
Suction tube with grooves
Content: 3 m (€55.00 / 1 m)
Threaded connector with Perrot cup system
Threaded nipple simple
Black, surface untreated
Threaded nipple with thread on both sides
Surface untreated, length 200 mm.
Threaded socket with ball, galvanized, for Bauer system
The threaded connector with ball (male part - VT) for the Bauer system is supplied complete with locking ring. The surface is galvanised.3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm
Threaded socket with ball, galvanized, for Perrot
Threaded socket with cup and sealing ring, galvanized, for System Bauer
The threaded connector with cup (nut part - MT) for the Bauer system is supplied complete with sealing ring. The surface is galvanised.3 inch = HK 76, cup width B = 98 mm3 1/2 inch = HK 89, cup width B = 120 mm4 inch = HK 108, cup width B = 145 mm5 inch = HK 133, cup width B = 160 mm6 inch = HK 159, cup width B = 180 mm8 inch = HK 194, cup width B = 230 mm
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
