Agricultural machinery spare parts

consisting of 1 piece of cord, 2 clamps, 2 screws, 2 washers.

to bird &~ Noot to jet mower

Suitable for BUSATIS mower Bidux 1205

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

Suitable for Steyr T80-180 with cleaning plates.

Upper knife 25 blades DME1606A

Connection joint between rocker arm and upper cutter head. Thread M14x1.5, bore 18mm, left

Connection joint between rocker arm and upper cutter head. Thread M14x1.5, bore 18mm, right

Thread M14x1.5, pin hole 16 mm.

Upper knife to double knife bar bidux system with a total number of blades of 30 pieces. 5 of these are blades with mushrooms to hold the knife guide arms. The pitch of the blades in the distance from blade center to blade center is 70mm. The knife is delivered complete with the riveted upper cutter head, seen on the left side in the direction of travel.Suitable for Aebi Mähtrac TT33 and Rapid MT200 with double-blade front mower and for Busatis rear and side mower BM 1205.

Upper knife to double knife bar bidux system with a total number of blades of 34 pieces. 6 of these are blades with mushrooms to hold the knife guide arms. The pitch of the blades is 70mm from blade center to blade center. The knife is delivered complete with the riveted upper cutter head. Suitable for Aebi Mhtrac TT33 with double knife front mower and for Busatis rear and side mower BM 1205.

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Bottom knife, 27 blades, 5 of which are mushroom blades

Washer M10 in material thickness 3.0mm

Washer M12 with a material thickness of 3.5mm

These specially coated papers are used to evaluate liquid distribution, degree of coverage, droplet density and penetration in plants. Water-sensitive paper is yellow and turns blue when water-containing splash drops hit it. The water and oil sensitive papers sold by FAIE are manufactured by Syngenta Crop Protection AG.

​Wear plate for ESM cutterhead for mower blade drive via a sliding block with an edge length of 38x38mm. The plate is attached to the inside of the cutterhead with 2 pcs. M6 screws on the inside of the cutterhead. When replacing, both wear plates should always be replaced at the same time. Delivery per piece!