Agricultural machinery spare parts

With flange 120 mm, for 1 3/8 x 6 and 1 3/4 x 6 profile, length 100 mm.

Bore 22 mm. Total length 100mm.

Suitable as a suction and pressure hose. Lightweight, highly flexible PVC hose with a shockproof spiral made of hard PVC and a smooth inner surface. Operating pressure max. 3 bar, vacuum load 0.9 bar.

Quick change frame basic kit with side locking. For welding on wheel loader consoles so that a transition from the type-specific mount to the EURO mount can be made. With 20 mm thick side panels. Sandblasted surface.

Hand lever can be positioned on the left or right, handle part can be adjusted four times in 90 steps, clamping path, clamping strength and closing force can be adjusted continuously, secured against self-loosening, ventilation via 1/2"~ Ball valve.6 inch = DN150, cup width B = 180 mm8 inch = DN200, cup width B = 200 mm

with 6"~ Flange connection

Hand lever can be positioned on the left or right, handle part can be adjusted four times in 90 increments, clamping path, clamping strength and closing force are infinitely adjustable, secured against self-loosening, ventilation via 1/2" ball valve.

Hand lever can be positioned on the left or right, handle part can be adjusted four times in 90 increments, clamping path, clamping strength and closing force are infinitely adjustable, secured against self-loosening, ventilation via 1/2" ball valve.

The quick coupler has a 6-inch flange connection with a hole pattern of 150 x 150 mm. 

For welding on all attachments,strong design with a width of 200 mm. Delivery: 1 pair

​Quick and easy coupling and uncoupling for implements on category 2 (85 cm) and 3 (102 cm) front loaders. The upper mounting bolts can be repositioned to allow individual tilt angle adjustment. The quick-change frame also has a mechanical central locking system. Mounting pins on the front loader side 30 mm, mounting shaft on the implement side 40 mm, mounting width of the front loader arm minimum 844 mm inside and maximum 1130 mm outside, locking pin Ø 20 mm, total width 1165 mm, weight 57 kg. With a load centre of gravity of 800 mm, the load capacity is approx. 3000 kg.The quick-change frame is suitable as a replacement for OEM front loader change frames.

​Quick and easy coupling and uncoupling for implements on category 2 (85 cm) and 3 (102 cm) front loaders. The upper mounting bolts allow individual tilt angle adjustment by repositioning. The quick-change frame also has a hydraulic locking mechanism. The hydraulic hose lines with a length of 1.5 m are included in the scope of delivery. The lines have a connection with an M18x1.5 mm union nut - 12L connection. Mounting pin on the front loader side 30 mm, mounting shaft on the implement side 40 mm, mounting width of the front loader arm minimum 844 mm inside and maximum 1130 mm outside, locking pin Ø 20 mm, total width 1165 mm, weight 53 kg. With a load centre of gravity of 800 mm, the load capacity is approx. 3000 kg.The quick-change frame is suitable as a replacement for OEM front loader change frames.

for inner tube

for outer tube

Raised countersunk screw for crank drive system Busatis and system bidux.

Rear swing arm complete with plain bearing, swing pin and lower blade ball joint. Suitable for Busatis and ESM double-blade mowers with hydraulic swing arm drive. The hole in the lower blade ball joint for mounting the cutterhead pivot has a diameter of 16.4 mm.

The harrow tine is mounted on the seed harrow at the rear, viewed in the direction of travel.