Agricultural machinery spare parts

Hose coupling with ball and locking ring suitable for the Bauer coupling system. The couplings are available in the dimensions listed with different diameters of the connecting pieces for the hose.Galvanized version.3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm

Hose coupling with cup and sealing ring suitable for the Bauer coupling system. The couplings are available in the dimensions listed with different diameters of the connecting pieces for the hose.Galvanized version.3 inch = HK 76, cup width B = 98 mm3 1/2 inch = HK 89, cup width B = 120 mm4 inch = HK 108, cup width B = 145 mm5 inch = HK 133, cup width B = 160 mm6 inch = HK 159, cup width B = 180 mm8 inch = HK 194, cup width B = 230 mm

Lever lock ring and rubber ring, galvanized.

The galvanised steel hose end piece is a practical accessory for the slurry hose. It is fitted with a lateral angle iron which protrudes from the spout. The hose end piece prevents the slurry hose from sticking to the container or pit floor. The slurry hose is fastened with wide band clamps.The total length is 370 mm. The spout is 220 mm long.

Stainless steel hose ties RUST FREE, version W4. All individual parts are made of stainless steel AISI 304. The edges of the wide band clamps are crimped to ensure easier installation.

Especially for retrofitting mechanical front loaders with hydraulic actuation of the tools. In conjunction with a EURO quick-change frame, a fully hydraulic front loader can be created in a very short time (see front loader conversion kit Faie No. 70599). With the 895 mm long tilting linkage and the lifting path of 507 mm, a tilt angle of up to 180 can be achieved.The scope of delivery includes 1 hydraulic hose with union nut M18x1.5 / 12L in lengths of 1100 mm and 1300 mm included.Pressure force per cylinder 6927 kg at 180 barTensile force per cylinder 5195 kg at 180 barTilt angle up to 180 Stroke path 507 mm

The hydraulically folding bale fork with 2 tines is equipped with a three-point and EURO mounting. The thick-walled zinc support tube with welded-in cone sleeves can be folded upwards hydraulically. This means that no fork protection is required for road transport. The high-quality square spring steel tines with a length of 1100 mm have an M22x1.5 mm thread and can bear loads of up to 1000 kg. The distance between the conical sleeves for the tines in the support tube is 660 mm.The spring steel tines, the hydraulic lines and the BG3 coupling plugs are included in the scope of delivery.

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

Application: Area sprayingInjector nozzle with double flat jet, 110 spray angle each.Angle of 60 between the two spray jets directed forward and backwards.Drop size like long AI TeeJet, therefore very low drift from 1.5 to 4 bar , optimal pressure for the effect from 4 bar, drift reduction excellent.Good lateral attachment to upright target surfaces and intensive penetration of tiered foliage.Large, round cross-sections for liquid and air increase operational safety and minimize wear.Two outer and inner air intake holes, injector insert can be removed if necessary.Automatic alignment of the spray jets with Quick TeeJet cap Order No. 66757.When using the nozzle with a fastening cap from a manufacturer other than TeeJet pay attention to the orientation of the nozzle. The black dot on the nozzle must point in or against the direction of travel.

Application: Liquid fertilization, surface sprayingPlastic versionVery low drift at 2-4 bar, optimal pressure for the effect 4-8 bar, JKI loss-reducing, Very good drift reduction.Thanks to the injector principle and depending on the properties of the crop protection product, drops with air pockets are possible.Larger drops can burst on the target surface, smaller drops that are created improve the deposition.The AI nozzle mouthpiece pressed into the Quick TeeJet cap ensures automatic alignment of the spray jet.

Application: surface spraying, liquid fertilization110 spray angle, injector technology, especially designed for the low pressure area, flat jet spray pattern.Compact dimensions with a length of 22 mm reduce the risk of damage.The injector principle produces larger drops, depending on the preparation Air pockets are also possible.Removable injector insertPressure range from 1.0 to 6 bar, optimal pressure 2 to 3.5 bar.Drift reduction very good, reducing JKI lossesAutomatic alignment of the spray jet with Quick TeeJet cap Order No. 66756

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

0.2mm thick shim for adjusting the height of the knife holder on finger bars from Agria, ESM mowers and Vogel &~ Noot mowers.

Shim plate for adjusting the distance between the knife holder and the friction plate. Suitable for Aebi, Agria, Bucher, ESM, Kppl, Nussmller Rasant and Rapid.