Products

​For wall or ceiling mountingOil-resistant hybrid polymer hose with fabric insertHousing made of impact-resistant plasticThe hose can be locked in place by simply pulling or rolled up automatically as requiredSwivel bracket for wall or ceiling mounting included in the scope of deliveryTechnical data Hose inner diameter: 9.2 mm Hose outer diameter: 14.5 mmHose length: 20 m Connection hose inner diameter: 9.2 mmConnection hose outer diameter: 14.5 mm Hose material: Hybrid polymer material with fabric insertConnection hose length: 2 m Operating pressure: 17 bar Burst pressure: 51 barOperating temperature: -10 - 60° C Connection thread diameter: 1/4”

​High-quality compressor with top equipment and sensational price-performance ratioThis high-quality compressor offers you everything you need for demanding work. It has a powerful and durable 2-cylinder compressor with a suction capacity of 510 liters per minute and a maximum pressure of 10 bar. With a filling capacity of 400 liters/min, even demanding compressed air devices can be operated without any problems.The low speed of just 1310 revolutions per minute and the V-belt pulley with integrated fan function ensure a long service life and low running noise. This means you can also work comfortably in the immediate vicinity of the compressor.The quality electric motor has an output of 3.0 kW/4.0 hp at 2800 rpm. The 100 liter tank ensures sufficient pressure storage and prevents the system from constantly switching off and on.The top equipment includes a Condor brand pressure switch, a chassis and a newly developed maintenance block with one DL extraction point each for clean air via a filter pressure regulator or lubricated air via a DL oiler for devices that require lubrication.This limited special model also has a hose reel fitted as standard with 10 meters of high-quality DL hose with an internal diameter of 8 mm as well as a connection hose and a quick-release coupling.The advantages of this compressor at a glance:Powerful and durable 2-cylinder compressorSuction capacity 510 liters per minuteMaximum pressure 10 barLow speed 1310 revolutions per minuteV-belt pulley with integrated fan functionQuality electric motor 3.0 kW/4.0 hp100 liter boilerTop equipment with Condor brand pressure switch, chassis and maintenance blockHose reel with 15 meter DL hose fitted as standardSensational price-performance ratioDon't miss out on this limited special model!

​Cookies: indispensable during the Advent seasonWhether vanilla crescents, gingerbread or aniseed bows - cookies are an integral part of our Advent season. This booklet collects well-known and newly discovered recipes, making it a sweet companion for the Christmas season. 64 pages. 

Assembly spray, the specialist for extreme conditions from -100 C to 800 C! ~Long-term corrosion protection and lubrication for assembling and dismantling various types of metal connections ~Protects metals from corrosive media (steam, fresh and salt water, diluted alkalis, many chemical vapors ) ~Also suitable as a solid lubricant ~Harmless in terms of the Working Materials OrdinanceReliably prevents seizingReduces friction lossesIdeal for threads and fitsPrevents contact corrosion on different metals Protects even against salt water, diluted acids, alkalis and chemical vapors Copper-graphite spray is silicone, PTFE, acid and resin-free or does not become resinous. Reliable protection against corrosion, wear and seizing. Gear wheels, chains, ball bearings, roller bearings, track, bearing and track rollers, sliding surfaces and slide rails are protected by the lubricity of copper-graphite spray , do not rust or jam. Press-fit bearings do not seize, even at high temperatures and high pressure. Valves, valve seat rings, grooves, pipe connections, flanges and seals are protected from aggressive media.Coarse and fine threads, nuts, screws, bolts, wedges, springs and bushings: Can be easily removed even after extreme thermal stress. Hinges, door and gate hangers, loading flaps and lock joints always remain functional.Copper-graphite spray helps, for example, on agricultural machinery and equipment, trucks, semi-trailers, trailers, conveyor belts and transport rails. Buses, garbage trucks, snow plows, concrete mixers, cranes, tank trucks, excavators, bulldozers and tractors. Military equipment such as tanks, guns, pioneer vehicles, amphibious vehicles, ships and much more.Copper-graphite spray protects against corrosion and seizing for a long time. It reduces the friction of moving parts and reduces abrasion of plastics and rubber on metal. Gives tighter connection for threads and fits. Prevents contact corrosion on various types of metal.Copper-graphite spray guarantees an application range of -100 to +800 C. Due to its chemical composition, the copper-graphite spray is extremely pressure-resistant and protects all metals against media that promote corrosion: water vapor, fresh and salt water, diluted alkalis, and many chemical vapors. Copper-graphite spray is a harmless working material within the meaning of the Working Materials Ordinance.Copper-graphite spray is indifferent to most gases, such as natural gas, butane, propane, noble gases, fluorocarbons and nitrogen. Only use with compressed oxygen is not possible.Copper-graphite spray - indispensable and practical for industry and trade!Danger and safety information:Danger: Extremely flammable aerosol. Container is under pressure: may burst if heated. Harmful to aquatic organisms, with long-term effect. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Do not smoke. Do not puncture or burn, even after use. Protect from sunlight and do not expose to temperatures exceeding 50C. Recycle contents/container.Physical and chemical characteristics ~Appearance: silver-colored ~Flash point: approx. -104 C (propane)Boiling point: -42 C ( propane) ~Relative density: approx. 0.95 g/cm ~Solubility in water: not miscible ~Lower explosion limit: approx. 1.5% by volume ~Upper explosion limit: approx. 10.9% by volume ~Temperature range : -50 C to approx. +1000 C Maximum average particle diameter of the plates and spheres: 15 m

​Robust metal housing and 13 mm drill chuckIntegrated key holderVariable, lockable speed switchPowerful angle drill with the performance of a power toolRobust metal housing and 13 mm drill chuckUp to 200 holes in 50 x 100 mm timber (22 mm auger bit) with one battery charge (5.5 Ah)The FUEL™ platform was developed for the most demanding users. The technology delivers maximum performance and combines three central components - 100% system-compatible with the MILWAUKEE®-M18™ product range Supplied without battery and charger (FAIE No. 129044)Technical data:Idle speed 0 - 1500 min-1Drill chuck clamping range 13 mmMax. Drill Ø in wood - auger bit 26 mmMax. Drill Ø in wood - self-drill 65 mmMax. Drilling Ø in wood - circular hole saw 102 mmMax. Drilling Ø in steel 12.7 mmWeight with battery approx. 4.1 kg

​ Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm

Robust cordless angle grinder with powerful motor and slim design for universal useElectronic safety cut-out: reduces kick-back when the disc jams - for a high level of user protectionOverload protection: protects the motor from overheatingElectronic soft start for smooth startingRestart protection: prevents unintentional start-up after battery changeTechnical dataBattery voltage: 18 VDisc Ø: 125 mmMax. Cutting depth: 34 / 1,339 mmIdle speed: 8500 /minSpindle thread: M 14Handle circumference: 191 mmWeight without battery pack: 1.6 kgWeight with battery pack: 2.3 kgVibrationSurface grinding: 5 m/s²Measurement uncertainty K: 1.5 m/s²Sanding with sanding sheet: 2.5 m/s²Measurement uncertainty K: 1.5 m/s²

​Battery-powered sprayer with 18 L capacity. Proven Mesto quality now with battery drive with adjustable pressure pump up to 5 bar for a uniform spray pattern and consistent output. Large filler opening for easy filling and cleaning. High-quality NBR seals for a long service life. Powered by 18V /4.0 Ah battery (not included) compatible with Bosch AMPShare system. Complete with long hose (1.5 m) and hollow cone nozzle.

​Handy cordless chainsaw with metal claw stop and automatic chain lubrication.Integrated storage for wrenchThe M18 FUEL™ cordless pruning saw delivers outstanding performance and high torque for cutting hardwood without falteringDesigned to meet user requirements for ergonomics, performance and durabilityCompact design for better control and maneuverability in hard-to-reach areasUp to 180 cuts in 10 x 10 cm cedar wood with one M18™ HIGH OUTPUT™ 5.5 Ah batteryThe easily accessible chain tensioner enables quick adjustment of the chain tensionInfinitely variable speed control gives the user full control over the power outputMetal claw stop for improved leverageAutomatic chain lubrication for increased productivityTool storage for combination wrenchSupplied without battery and charger (FAIE no. 129044)Technical dataBattery: Li-ionVoltage: 18 VNumber of drive links: 33Chain pitch: 9.5 / 3/8 ”Gauge: 1.1 / 0.043 ”Chain speed: 5.0 (m/s)Saw blade length: 20 cmBar length: 20 cmTranslated with DeepL.com (free version)

​The dry cutting technology enables cold, fast and burr-free machiningHigh performance with a compact designIntegrated hookDry cutting technology enables cold, fast and burr-free cuttingTool-free depth adjustment, quick and easy adjustment of the cutting depth from 0 to 57 mmCompact and lightweight design for comfortable useDouble-acting trigger prevents accidental activationTool-free cutting depth adjustment and plunge lever for fast and effective plunge cutsIntegrated hook for easy storage between usesOn-board Allen key storage for easy access and to prevent loss of the keySupplied with 150 mm metal cutting blade with 34 teethThe DNA of our Fuel™ platform defines the balance of cordless technologies. Milwaukee®'s PowerState™ brushless motor, Redlithium™ tech100 % system compatible with the MILWAUKEE®-M18™ product range Supplied without battery and charger (FAIE No. 129044)Technical data:Version: Li-IonVoltage: 18 VIdle speed: 3900 (r/min)Saw blade ø: 150 mmSaw blade bore: 20 mmCutting depth 90°: 57 mmWeight: 5.9 kgType: M 18 FMCS-0X

Impact wrenches for every application. From particularly compact to extremely powerful. High speed for fast work.Customizable settings thanks to the ONE-KEY™ appSave custom settings to the device's memoryEasy management of your devices and equipmentM18™ FIWF12 with new ONE-KEY™ technologyConnects to the ONE-KEY™ app via Bluetooth®Complete customization of tool settings via the ONE-KEY™ app to tailor the tool precisely to your requirementsControl speed, torque, start and end speed, overload protection, and LED work area lightingConfigure the ideal settings for every applicationProgram/save profiles for absolute controlChoose from a number of pre-installed application profiles or simply create your own profile for the best resultsStore up to 4 custom profiles in the device's internal memory for quick changes at workDelivery without charger and batteryTechnical data:Idle speed: 900/1400/1900/2500Max. torque: 40/120/220/300Voltage: 18 VBattery: Li-ionImpact rate: 1300/2100/2550/3200Weight with battery: 1.8 kgMax. screw diameter: M16

​Compact design with a length of only 124 mmSuitable for M18 screwsCompact cordless impact wrench with a maximum tightening torque of 339 NmCompact design with an overall length of 124 mm for working in confined spacesDRIVE CONTROL™ enables quick switching between 4 switching stages with different speed and torque settingsPrecise working to prevent damage to the screw and material, for maximum performance and the toughest applications and for intelligent workingThe automatic switch-off function ensures that no more than 34 Nm of torque is applied when screwing by hand to prevent over-tighteningThree LEDs ensure optimum illumination of the work area½˝ Square locking boltMetal belt clipSupplied without battery and charger  (FAIE no 129044)Technical data: Version: Li-IonVoltage (V): 18Idle speed (rpm): 900/1650/2400/1200Idle speed (rpm): 1000/2400/3500Fastening: 1/2” external square driveMax. Torque (N-m): 102/203/339/34Torque for loosening (N-m): 339Weight (kg): 1.8Type: M 18 FIW2P12-0X

​Compact impact drill driver with a length of only 175 mm Newly developed drill chuck for improved bit and drill bit retention Bright LED workplace lighting Higher performance under load - high torque of 158 Nm AUTOSTOP™ function, increased safety.13 mm metal chuck for quick bit change and bit retention and secure hold of tools even when using the impact function. Brighter LED workstation lighting Battery charge level indicator shows remaining charge All-metal belt clip for quick and easy hanging of the tool Supplied without battery and charger (FAIE No. 129044)Technical dataVersion: Li-Ion Voltage (V): 18Idle speed (r/min): 0-2100 0-500 Idle speed (r/min): 0 - 33000Torque max.158NmDrilling capacity wood 89mmDrilling capacity steel 16mm 16 Drilling capacity masonry 16mm Weight (kg): 2.1

​Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger

​The brushless M18™ lawn trimmer reaches its full power in less than a second and can therefore also remove dense vegetation.Up to 4,600 min-¹ in first gear and up to 6,200 min-¹ in second gearTwo gears with variable speed switch allow you to choose between maximum power or maximum running timeAdjustable cutting width from 35 cm - 40 cmUp to one hour run time with one M18™HIGH OUTPUT™ 8.0 Ah battery chargeEasy to change the string head and adjustable two-handed handle for maximum comfort during and after useSupplied without battery and charger (FAIE no. 129044)Technical data:Weight with battery: 5.6 kgBattery: Li-ionVoltage: 18 VCutting line thickness: 2.4 mmCutting width: 40 cm

​Powerful cordless blower with an air flow rate of up to 17 m³/min at 233 km/h for removing leaves, gravel and debrisHigh, constant power with a consistent blowing force of 17.7 N over the entire battery runtimeBest control thanks to balanced design and two-handed and variable speed adjustmentInterchangeable nozzle attachments to optimize the air flow for different applicationsFull throttle in less than 1 secondSecond handle for better handling in tight spacesVariable speed control for full power control2 x 18-volt batteries for outstanding performance and runtimeSupplied without battery and charger (FAIE no. 129044), incl. cone nozzle and flat nozzle.Technical data:Version: Li-IonVoltage: 18 VAir flow: 0 - 1020 (m³/h)Weight: 2.7 kgType: M18 F2BL-0

​Milwaukee cordless planer with cutting depth adjustment Supplied without battery and charger (FAIE NR. 125562)Angle fenceChip ejection right or leftHandy cordless planer with 4-pole motor for maximum power in a compact designREDLINK™ electronics - overload protection in the machine and battery ensures a long service lifeThe REDLITHIUM™ ION battery offers a perfectly coordinated design, advanced electronics and loss-free power output Fast work progress thanks to carbide reversible bladesPrecise surface processing thanks to cutting depth adjustment up to 2.0 mmFolding depth of up to 10.7 mmChip ejection optionally on the left or rightMotor brake and foldable stand for safe storageConnection on both sides for dust bag or external extraction systemSingle cell monitoring for optimized service life and long battery life100% system-compatible with the MILWAUKEE®-M18™ product rangeScope of delivery: Rip fence, angle fence, chip bagTechnical data:Voltage: 18VStandard equipment | Scope of delivery: Rip fence, angle fence, chip bagWeight with battery: 2.7 kgCutting width: 82 mm

​Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg

​Spindle lock - increased productivityRAPIDSTOP™ for fast disk brakeUniversal holder for 6 and 8 mm accessoriesCorded power similar to that of a 1,200 W sanderSpindle lock - increased productivity by reducing 2 wrenchesRAPIDSTOP™- stops all accessories in less than 2 secondsLower battery compartment angle - for better balance and ergonomics compared to the previous modelUniversal holder for 6 and 8 mm accessoriesSlim handleRemovable dust grille prevents the ingress of dirt and extends the service life of the motorRubberized front for comfortable handlingLine lock-out function to prevent automatic switch-onM18 FUEL™ was developed for the most demanding users. The technology delivers maximum performance and combines three central components - the brush100 % system-compatible with the MILWAUKEE®-M18™ product range Supplied without battery and charger (FAIE no. 129044)Technical data:Idle speed: 27000 rpm.Max. diameter of sanding accessories: 50mmmax. collet diameter: 6 + 8mmWeight incl. battery: approx. 2.0kgSwitch: slide switchAnti-vibration system (AVS): YesBrake: YesBattery: Li-ionVoltage (V): 18

​The BIRKENSTOCK Arizona is a true classic that has delighted men and women for decades. The simple sandal with two straps stands for timeless design and has long since become a comfortable cult shoe. The upper is made from the skin-friendly and hard-wearing synthetic material Birko-Flor®. Size 36-43.Anatomically shaped cork-latex footbedUpper material: Birko-Flor®Insole: suedeSole: EVADetails: two straps, each with an individually adjustable metal pin buckleMade in Germany

​Part of the Mini Plus polystyrene series. Perfect for rearing offspring and queens.Lightweight, insulating material (EPS)Very weather-resistant and durableNot coated, whiteDimensions: 300 x 300 x 40mmTip: An additional protective treatment with suitable varnish or hive paint ensures durability!

​Soothing care for daily use - gentle and quick help for chapped and cracked heels Cracks, also known as chapped and callused skin, often occur on the feet, especially on the heels. Dry skin feels rough and can tear easily, leading to painful cracks. Pressure points, for example due to poorly fitting shoes, encourage the development of fissures.The special care cream offers regenerating intensive care for cracked and callused skin. With natural ingredients such as milk proteins and urea, the skin is optimally nourished. These active ingredients, such as St. John's wort oil and nourishing extracts of fennel, camomile, mistletoe and yarrow, penetrate deep into the skin layers and quickly relieve pain. Rapid treatment of calluses is important to avoid pain and the risk of infection. Dr. Ehrlich's Crack Care Cream has been developed for easy application at home and is particularly effective. Herbal extracts make the cream pleasant on the skin and ensure smoothness and suppleness. Trust in our high quality. Cracks can recur and are often promoted by internal factors. Contents: 100 ml.Application:Apply a thin layer to the heel skin in the morning and evening and massage in. Absorbs quickly and is non-greasy.Ingredients:Aqua, Urea, Glycerin, Panthenol, Magnesium Stearate, C15-19 Alkanes, Diisostearoyl Polyglyceryl-3 Dimer Dilinoleate, Dicaprylyl Ether, Coco-Caprylate/Caprate, Glycine Soja Oil, Olea Europaea Fruit Oil, Cera Alba, Magnesium Sulfate, Citric Acid, Hypericum Perforatum Flower/Leaf/Stem Extract, Calendula Officinalis Flower Extract, Lactose, Milk Protein, Alcohol Denat. Lactic Acid, Foeniculum Vulgare Extract, Humulus Lupulus Extract, Melissa Officinalis Extract, Viscum Album Leaf Extract, Chamomilla Recutita Extract, Achillea Millefolium Extract, Allantoin, Benzyl Alcohol, Ethylhexylglycerin, Tocopherol.

This Reinmacher pomegranate cream soap is a mild and skin-friendly soap that is suitable for the daily cleaning of sensitive and demanding skin. It contains skin-friendly ingredients that gently cleanse and care for the skin.The soap is subtle and smells of pomegranate, the pH value of 5.5 supports the skin's natural acid mantle and helps protect the skin to protect from drying out.

​Developed for high durability and everyday comfort, ideal for assembly work or light construction work.Nitrile coating protects the palm of the hand.Designed for high dexterity when handling small objects.SMARTSWIPE™ palms and fingertips allow touchscreen operation without removing the glove.Cut protection according to European standard: EN ISO 21420 and EN388:2016 (4121A).