Werkzeuge & Maschinen

Air consumption approx. 250 L/min., cutting performance in steel approx. 1.6 mm, weight only 0.6 kg, including saw blades.

Two-cylinder high-performance units made of gray cast iron for a long service life Made of metalStarting capacitor and starting relief valve ensure easy starting on 230 volt modelsTank pressure gauge Made in GermanyFilter pressure regulator with pressure gauge Made in Germany for regulated compressed air that is cleaned of condensate, dirt and oilTen-year guarantee against rust through on powder-coated compressed air tanksIncludes high-quality composite safety coupling and high-quality CONDOR pressure switchLarge ergonomic bow handleStable steering chassis with parking brake in conjunction with large, puncture-proof PU wheels

Mobile piston compressor with belt driveTwo-cylinder high-performance units made of gray cast iron for a long service lifeLarge fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressorQuality electric motor with high tightening torqueElectric motor equipped with motor protection switchAftercooler with cooling fins ensures a low container inlet temperature and thus less moisture in the compressed airStable belt grid protection made of metalStarting capacitor and starting relief valve ensure easy starting on 230 volt models400 volt models as standard with phase inverter for easy manual reversal of the direction of rotationCompressed air tank equipped with safety valve, tank pressure gauge and condensate drain valveInclusive of all safety devicesCompletely ready for connectionFilter pressure regulator with a pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for container pressureTen-year guarantee against rust through on powder-coated compressed air tanksIncludes high-quality composite safety coupling and high-quality CONDOR pressure switchFlexible armored hose line with heat protection for a long service life without vibration breakage< li>Ergonomic handle, rubber handle and transport handle on the compressed air tank for comfortable transportStable steering chassis with parking brake in conjunction with large, puncture-proof wheels for comfortable transportThanks to the two-stage compression 2-cylinder -High-performance unit with very low speed, a particularly quiet and low-vibration operation is achievedThis ensures a longer service life due to less wear In addition with an intercooler for the aftercooler Compressor system : HOS Suction capacity approx.: 650l/minFilling capacity approx.: 520l/min Explanation of filling capacity at: 6 bar working pressureNumber of cylinders: 2 Number of compression stages: 2Compressor speed: 950min Compressed air tankMaximum pressure: 10bar Tank capacity: 100l

​Compact compressor with a 2-cylinder, 2-stage high-performance unit with approximately 620 L/min suction capacity and a filling capacity of 520 L/min (at 6 bar).Also suitable for demanding DL tools.Electric motor with 4.8 kW/6.5 HP at 400 volts. Slow compressor speed of only 950 rpm for quiet operation and a long service life.The compact 90 mm reservoir and high-quality chassis also make it suitable for mobile use.Very powerful compressor with high-quality CONDOR pressure switch and composite safety clutch at a special price.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 320 L/min, speed 1420 rpm, required. Motor power 1.8 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.5 L.

Cast iron compressor with 2 cylinders with aftercooler, suction capacity 556 L/min, speed 1440 rpm, required. Motor power 4.0 kW. Complete with filter and fan wheel 280x13 mm. Oil filling quantity 0.9 L.

Cast iron compressor with 2 cylinders and 2-stage compression, suction capacity 820 L/min, speed 1215 rpm, required. Motor power 5.5 kW. Complete with filter and fan wheel 398x9.5 mm. Oil filling quantity 1.34 L.

pieces 4 to 12 mm, in sheet steel cassette, professional quality, for stone, concrete and masonry

for punching test badgesgalvanized

Robust circular saw ~Delivered without battery and charger. ~Faie No. Battery and charger starter set: 124169Technical data:Idle speed: 5000/minMax. Cutting depth 90: 66mmMax. Cutting depth 45: 48mmDiameter saw blade: 190mmBore diameter: 30mmWeight with battery: 4 kg

With brushless motor, member of the Power X-Change family. Simple, tool-free adjustment (cutting depth, angle of inclination). With a large handle bar for fatigue-free work, optimal lighting thanks to integrated LEDs, with a high-quality saw table made of aluminum. Thanks to the spindle lock, it's easier &~ quick blade change (blades with 20 &~ 30mm inner can be used). Including parallel stop for precise cuts, cutting depth 65mm (90) or 45mm (45). Saw blade 190x20mm, delivered loose, without battery and charger.

​Powerful drilling with low vibrationsSafe hammer thanks to AUTOSTOP™ technologyFIXTEC™ quick-change tool system for various applicationsThe fastest rotary hammer in its class, resulting in increased productivityPowerful hammer mechanism delivers 2.5 joules of impact energy with low 12.9 m/s² vibrationsDrills up to 125 ⌀ 10 x 50 mm holes with one M18™ HIGH OUTPUT™ 5.5 Ah battery chargeAUTOSTOP™ switches the tool off to protect the user in dangerous situationsFIXTEC™ system for tool-free chuck change between SDS-Plus and 13 mm metal chuckAll-metal gear housing - optimum fit of the gears for increased tool life4 operating modes: rotary hammering, hammering only, drilling only and Variolock for maximum versatilityCompatible with M18 FCDDEXL or M18 FDDEXL dust extractorsThe FUEL™ platform was developed for the most demanding users. The technology delivers maximum performance and combines three central components -100% system-compatible with the MILWAUKEE®-M18™ product rangeSupplied without battery and charger (FAIE no. 129044)Technical data:Designation: Model variant: M18 FHX-0XSupplied in HD boxWeight: 3.4 kgWeight with battery: 4.4 kgIdle speed: 0 - 1330 rpmMax. Drilling diameter in concrete: 26 mmMax. Drilling diameter in wood: 28 mmMax. Drill diameter in steel: 13 mmMax. Impact speed: 0 - 4800 [min_1]Impact energy: 2.5 EPTA JVoltage: 18 V

Professional tool set consisting of the cordless angle grinder FSAG125X with 125mm disc diameter and 8500 rpm, as well as the Prof cordless impact drill FPD3 with 158Nm torque, ~2-speed gearbox with impact function for working in brick, concrete and the like. ~High-quality 13mm keyless drill chuck for secure drill holding, ~LED work light for optimal workplace illumination as well as compact design for working in confined spaces. ~Complete promotional set with: angle grinder, Drill/screwdriver, 2x 5Ah battery, charger and 2 HD cases.

​Powerful cordless impact drill with 82 Nm torque. 2-speed metal gearbox with impact function and sturdy 13 mm keyless chuck. Compact, brushless motor for the toughest applications and a long service life. Special offer set with tool, 18 V/5.0 Ah battery.Supplied with charger and practical carrying case.

Milwaukee professional cordless drill/driver with up to 158Nm torque. ~Despite high performance, extremely compact design with only 173mm length, ideal for tight spaces or long working days. ~The drill/driver has a metal 2 -gear transmission, a stepless speed setting (0-500, 0-2,100) and R+L-run. ~The robust 13mm keyless chuck ensures a secure tool hold during heavy use. ~With the standard LED Work light means you always have a perfectly illuminated working area. ~Delivered with case but without battery and charger. Faie No. battery starter set: 124169

​This 18V cordless drill/driver system with up to 65 Nm of torque enables powerful screwdriving and precise drilling, even under demanding conditions. Its compact design makes it comfortable to hold and facilitates overhead work and working in confined spaces.Advantages & Features• Brushless motor – high efficiency, longer runtime, and reduced maintenance• Aluminum gearbox housing – robust construction for heavy-duty use and a long service life• LED work light with afterglow – even illumination in low-light conditionsFrequently Asked QuestionsIs the tool suitable for intensive use?The robust housing and overload protection allow for use under heavy loads.Which batteries can be used?Compatible with all 18V CAS battery packs and chargers.Is any accessory included?The tool is supplied in a metaBOX, without a battery or charger.

Milwaukee professional cordless impact drill with max. 158Nm for the toughest applications. ~Can be used for practical drilling and screwing work thanks to the metal gear with 2 gears and impact function. ~The short length of only 175 mm provides Easy to work with even in tight spaces.Of course, this top-of-the-line device has electronic speed control and an R+L run. The impact-resistant 13 mm keyless chuck ensures that the tool is held securely in every use. The standard LED light ensures safe illumination and thus a good view of the work area in any light. ~It is delivered with Case, drill chuck and additional handle but without battery and charger.Faie No. Battery ~ - Starter set ~ 124169

High sawing performance: over 32 meters in chipboard (19 mm) with just one battery charge Extremely handy thanks to the small handle circumference and soft grip surface Precise and material-appropriate sawing thanks to variable Number of strokes, pendulum stroke and low-lying, spring-supported saw blade guide Switchable chip blowing function ensures a clear view of the interface Integrated LED work light to illuminate the interface Delivery without battery and charger. Faie No. Battery and charger starter set: 124169Technical data:Type of battery pack: Li-IonVoltage of the battery pack: 18 V< br>Largest material thickness in wood: 100 mmLargest material thickness in steel: 10 mmPendulum stroke levels: 5Number of strokes when idling: 800 - 3,500 rpmWeight (with battery pack): 2.9 kg (without battery pack, without charger)

Powerful cordless pruner for professional use in the tree care sector.With practical telescopic shaft, resulting in a long reach. Low-vibration and very quiet also ideal for urban areas. With side chain tension and captive nut on the sprocket cover.Technical data:Total length: 270-390mmRail length : 30cmWeight: 4.6 kgSaw chain pitch: PBattery system: Lithium Ion PROBattery runtimes:Battery runtime with AP 100/200/300/300S: up to max. 18 min / 42 min / 55 min / 68 min.< li>Battery life with AR 2000/3000: up to max. 195 min / 300 min Delivery without battery and without charger!

Handy cordless pruning saw cuts hardwood up to 75 mm. Very light and easy to handle thanks to its low weight of just 2.3 kg. The standard oil reservoir ensures a long service life for the chain. Technical specifications: Bar length 15 cm, chain speed 5 m/s, weight: 2.3 kg, cutting capacity: up to 120 cuts with a 4.0 Ah/12 V battery. Comes complete with chain and bar, but without battery or charger.

​A very practical cleaning tool for small jobs around the house.This cordless pressure washer is ready to use in moments and, with up to 24 bar of pressure, is surprisingly effective for cleaning vehicles, garden furniture, windows, and much more. Water is supplied via a standard garden hose or, if no water line is available, independently of a water mains connection using a container or the included collapsible water container.Thanks to the battery operation (included), a mains connection is not required.Technical specifications:Maximum pressure: 24 barWater flow rate: max. 230 L/hWater temperature: max. 40°CWeight: only 1.3 kgRuntime with one battery: approx. 15 minScope of delivery: tool, 4-in-1 nozzle, spray lance extension, spray hose with filter, collapsible water container, cleaning agent spray set, and practical storage bag. Complete set: includes 2x AS2 batteries and AL1 charger.

​A very practical cleaning tool for small jobs around the house.This cordless pressure washer is ready to use in moments and, with up to 24 bar of pressure, is surprisingly effective for cleaning vehicles, garden furniture, windows, and much more. Water is supplied via a standard garden hose or, if no water line is available, independently of a water mains connection using a container or the included collapsible water container. Thanks to its battery operation (battery not included), a mains connection is not required.Technical specifications:Maximum pressure: 24 bar, maximum water flow rate: 230 L/h, maximum water temperature: 40°C, weight: only 1.3 kg, runtime with one battery: approx. 15 min.Scope of delivery:` ...

​Compact cross-cut and mitre saw with powerful 1,100 W motor. Cutting area at 90° 120 x 60 mm or 80 x 45 cm at 45°, turntable can be rotated 47° in each case, saw blade inclination 47° left or 2° right for precise mitre cuts. Carbide saw blade 216 x 3 x 40 Z. Compact dimensions of approx. 47 x 46 x 48 cm and only 8.7 kg make it ideal for mobile use.

90 cylindrical shaft