Products
Square profileMade of spring steel 55Si8, partly C45. All tines with tapered nut and quality guarantee.
Extremely strong and stable pile shield with hydraulic upper gripper.Extensive application possibilities thanks to the large opening width, the curved gripper arm and the long conical horns. ~Also very suitable for transporting small wood (closes almost completely) and ~ also suitable for transporting round bales to the feeding area. ~Incl. screwed Euro mount, ~double-acting hydraulic cylinder including hoses and hydraulic connector. ~Max. 3 tons load, ~Height min. 792 mm, max. 1178 mm, max. opening 960 mm, width 1200 mm!approx. 190 kg weight. ~
Extremely strong and stable rumble shield with hydraulic upper gripper. Extensive application possibilities thanks to the large opening width, the curved gripper arm and the long conical horns. Also very suitable for transporting small wood (closes almost completely) and also suitable for transporting round bales to the feeding area. Including screwed Hauer B mount, double-acting hydraulic cylinder including hoses and hydraulic connector. Max. 3 tons load, height min. 792 mm, max. 1178 mm, max. opening 960 mm, width 1200 mm!
Extremely strong and stable pile shield with hydraulic upper gripper.Extensive application possibilities thanks to the large opening width, the curved gripper arm and the long conical horns. ~Also very suitable for transporting small wood (closes almost completely) and ~ also suitable for transporting round bales to the feeding area. ~With four solid mounting points for screwing (4x holes each) or welding for various quick-change mounts - WITHOUT Euro mount!With double-acting hydraulics -Cylinder including hoses and hydraulic connectors.Max. 3 tons load, ~Height min. 792 mm, max. 1178 mm, max. opening 960 mm, width 1200 mm. ~160 kg weight.
Front radiator bracket for Steyr 8080 SK1
Fender flares primed, front right for Steyr 8065-8095Width version 220mm
Version: Painted
The robust rubber thresholdRubber front thresholds - as a gentle boundary in the cubicle - allow the cow to lie comfortably with free space to the front and thus ideally complement the control equipment in the cubicle. The maxiBOARD is approx. 11 cm high and allows the cow to lie in a natural position, for example with her front leg stretched out. When standing up, the carpal joints are protected. The rounded shape also makes it easy to add bedding from the head space. maxiBOARD is placed overlapping a little on the lying mat and can therefore be attached at the same time as the mat. Retrofitting is also possible. It is a perfect fit for 3 cm thick mats; a special board profile is placed underneath for installation with thicker mattresses.Length 175 cmDelivery incl. 7 frame dowel sets 10x100 mmTranslated with DeepL.com (free version)
Color: tinted green
Suitable for Steyr front and rear window
Frost monitor specially developed for use in harsh environments with splash-proof Schuko plug and coupling (IP44). The temperature range used closes the circuit with a single pole when temperatures fall to just above freezing point at approx. 3°C and opens when temperatures rise above 8°C. The cable has no power consumption!Total length 100 cmApplication:For connecting appliances which should only be switched on when there is a risk of frost and which no longer need to be operated when temperatures rise.Application examples:Heated watering troughs in agriculture (also for switching off the transformer)Infrared heat lamps (e.g. in calf igloos, calf pens, chicken coops, etc.)Frost monitor heaters in the house or garageConstruction site heatersGreenhouse heatersTechnical datamax. load: 1,000 wattsmax. current: 5 ASwitch-on temperature: 3°CSwitch-off temperature: 8°C (at 1,000 W)Degree of protection: IP68 for sensor housing, IP44 for plug and couplingCable: rubber cable 3x1.5 mm²Translated with www.DeepL.com/Translator (free version)
The ready-to-plug heating cable for gutters and pipes meets the requirements of strength class M2 according to IEC60800:2009 to keep gutters and pipes safely frost-free. Thanks to the high heating output of 20 watts per meter, the heating cable keeps gutters, downpipes and pipes frost-free even at very low temperatures. The integrated temperature switch reliably switches the heating cable on at a temperature of +3 C and off again at +12 C.suitable for gutters with strength class M2ready-to-plug heating cable for easy installationintegrated thermostat for energy-saving usehigh protection class: IPX7incl. Protective contact plug for a high level of safetyLength of connection cable: 2mNOTE:Please note that each heating cable connection has a separate FI -Circuit breaker must be fused. (e.g. Art. No. 296099, plug-in personal safety switch)The heating cable must be protected from sharp edges, e.g. at the transition from the gutter to the downpipe, by using edge protection (Art . No. 296098)The heating cable must not touch, overlap or cross itself or another heating cable at any point. In order to permanently exclude contact, the use of suitable spacers is recommended (Art. No. 296097)Pipes, metal gutters, protective pipes and metal casings are to be protected from the metal for safety reasons Laying to ground
Content: 20 m (€3.75 / 1 m)
?to heat the branch line of drinking troughsa 24 V transformer is required for operation Heating cable frost-proof down to -45C< /ul>
Keeps your water pipe frost-free up to a maximum of -45 C! Integrated frost protection thermostat (switch-on temperature approx. +5 C, switch-off temperature approx. +13 C), not suitable for heating pipes, if there is additional insulation, do not insulate the thermostat. IPX7, VDE tested.What should you pay attention to with 230 V heating cables:The water pipe must be groundedthe 230 V-heating cables are ready to plug in and can be connected to a power supply with a circuit breaker (FI switch 30 mA).The heating cables must not be shortened and should therefore be ordered in the correct length Remaining lengths can be wrapped around the pipe in turns (note that a distance between turns of at least 15 mm must be maintained) Do not kink the heating cable and keep the maximum bending radius of approx . Observe 50 mmThe heating cables can be attached to the pipe with insulating tape or carefully with cable tiesWhen used on plastic pipes, the pipe must be covered with aluminum adhesive foil (e.g . B. 120087)The pipe and the heating cable should be insulated with a maximum insulation of 13 mmThe thermostat of the heating cable (always 2m away from the plug) should be on in the coldest position of the pipe The thermostat should be kept clear of the insulationDo not use 230 V heating cables in the browsing area of animals the installation Must be carried out by a qualified specialist in accordance with VDE0100 Power: 16 W / meterDo not install unprotected in the area where the animals are browsing - use here only 24 volt heating cable! Heating cable must not be shortened!
Content: 24 m (€2.62 / 1 m)
Original Suevia! For heating the branch line made of galvanized pipe or suitable plastic. Plastic cables must be wrapped with aluminum adhesive tape.24 V, 20 W, 2 m length.
Content: 2 m (€39.98 / 1 m)
Practical measuring device for quickly and easily determining the frost resistance of your vehicle.
Suitable for all pool and pipe heating systems, external probe ensures automatic switching on and off.IP 54, in a splash-proof housing. Max. permitted power 3.6 kW.Advantages:the frost protection installation is not switched on when there is no risk of frostthe thermostat automatically switches the frost protection elements off or on< /li>The response temperature is freely adjustable The frost protection thermostat should be installed in the coldest place.
Extra strong version from Kelomat. ~For slices and juliennes without changing the blades ~Leftover holder with included finger protection ~ Adjusting knob for easy adjustment ~Slices from 1 mm to 9 mm thickness ~4.5 mm and 9 mm vegetable sticks (Julienne) ~ Robust thanks to stainless steel ~Easy to use and clean ~Recommended to clean by hand