Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Suitable for blind rivets, blind rivet nuts and for sheet metal nibblingwith 2 sheet metal nibbler insertsIncludes 5 interchangeable nose pieces and 6 interchangeable rivet nut pulling mandrelsNo tools required to change the nose pieceslittle effort required thanks to innovative lever technologynarrow pliers headwith rubber handleBody made from special tool steelBlind rivets aluminum: 2.4 - 3.2 - 4.0 - 4.8 - 6.4 mmSteel blind rivets: 2.4 - 3.2 - 4.0 - 4.8 mmRivet nuts: M3 - M4 - M5 - M6 - M8 - M10
Precise sharpening of saw blades within a few minutes Quick and easy sharpening processSaw blades from 80 mm to 700 mm can be sharpenedSturdy cast iron design for precise workMotor unit can be swiveled by 20° for sharpening interchangeable-tooth saw bladesSaw blade holder angle adjustable from 45° to -30° for different tooth anglesVibration-damping feet for vibration-free and low-noise operationTechnical data:Grinding wheel diameter: 125 mm Grinding wheel bore: 13 mmGrinding wheel width: 10 mm Grinding wheel type: DiamondSetting angle support table left: 30° Setting angle of support table right: 45°Dimensions and weight:Length: approx. 700 mm Width/depth: approx. 382 mmHeight: approx. 295 mm Weight (net): approx.17 kgElectrical data:Drive motor power: 250 W Length of connection cable: 1.8 mProtection class: 1Protection class: IP54 Supply voltage: 230 VMains frequency: 50 Hz
"VDE screwdriver" for safe working on live parts up to 1,000 V AC voltage. Protective insulation sprayed onto the blade, safety tested piece by piece. Slot: 2.5 - 4.0 - 5.5 - 6.5 PH 1 - PH 2
Diamond-tipped flap disc for working on tiles, ceramics, paving, porcelain stoneware, etc. Premium quality for long service life and universal use. Suitable for all commercially available one-hand angle grinders.
Slide rail basic bracket for wet and dry sander NTS 251
Special socket wrench set with 1/4" and 1/2" drive for inch screws - Ideal for use on English or American machines or vehicles.High-quality Proxxon quality made of chrome vanadium Steel 31.Delivered in a solid metal cassette - compact and easy to transport.Base and inserts made of CrV steel. ~Blades made of high-strength special steel alloyed with chrome, silicon, manganese, molybdenum for extreme hardness and torsional strength. Optimum surface protection of the CrV base: 2x nickel-plated and 1x chrome-plated. ~Inserts for 1/4" square drive (6.3 mm): 5/32" - 3/16" - 7/32" - 1/ 4" - 9/32" - 5/16" - 11/32" - 13/32" - 7/16" - 1/2" - 9/16". HX screwdriver bits 1/8" - 5/32" - 3/16" - 1/4".Inserts for 1/2" square drive (12.5 mm): 3/8" - 7/16" - 15/32" - 1/2" - 9/16" - 19/32" - 5/8" - 21/32" - 11/16" - 3/4" - 13/16" - 7/8" - 15/16" - 1" - 1 1/8".Five angled Allen keys sizes 0.05" - 1/16" - 5/64" - 3/32" - 1/8". 1/4 "-Adapter.
With 1/4" square drive (6.3 mm)(for tightening torques here below 25 Nm): Hexagon inserts for SW 4 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 and 12 mm.With 1/2" square drive (12.5 mm)(for tightening torques over 25 Nm): 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 and 24 mm. All parts matt chrome-plated and clearly marked.See illustration for other contents.Supplied in compact plastic case. High-strength, with snap lock and sturdy insert.
The soft-face mallet is a 2-part clamping housing made of malleable cast iron Impact inserts and Simplex handle can be easily replaced by loosening or tightening the hexagon socket clamping screw, with 1 impact insert each made of rubber composition, black medium-hard and superplastic white medium-hard Areas of application:Paving work, setting kerbstones, setting facing blocks, scaffolding, tent and hall construction, gardening and landscaping, housing assembly, prefabricated house construction, carpentry, fence construction, hammering in split wedges Inserts: Rubber black/superplastic whiteImpact: medium hardHandle: Wood
Compact cordless impact wrench with 1/2" external square drive and 300 Nm Supplied without battery pack, without chargerUnique Metabo brushless motor for fast work progress and maximum efficiency in every applicationThree speed/torque levels for a wide range of applicationsIntegrated work light to illuminate the work areaRobust die-cast aluminum gear housing for optimum heat dissipation and durabilityWith practical belt hook, can be fixed on the right or left as requiredWith metaBOX, the intelligent solution for transportation and storageTechnical dataBattery voltage18 VMax. Screw sizeM16Max. No-load speed3050 /minMax. Impact speed3900 /minMax. Torque300 NmMax. Release torque480 NmSpeed/torque levels3Tool holderOuter square drive 1/2 " (12.70 mm)Weight without battery pack1.18 kgWeight with battery pack1.58 kg
Extremely powerful cordless impact wrench with 1/2" external square and max. 1900 Nm loosening torque.Unique Metabo brushless motor for fast work progress and the highest Efficiency in every useLoosening in APS mode (Automatic Power Shift): prevents the screw/nut from falling down by automatically reducing the speed after looseningOverload protection: protects the motor from overheatingVery powerful for heavy screwing applicationsLow kickback working with very high torqueTwelve speed/torque levels for a wide range of applicationsIntegrated Work light for illuminating the work areaRobust die-cast aluminum gear housing for optimal heat dissipation and longevityDelivered in Metabo metaBOX, but without battery and charger.CharacteristicsBattery voltage: 18 VMax.Screw size: M30Max. Idle speed: 0 - 1500 rpmMax. stroke rate: 2250 rpmMax. torque: 1450 NmMax. Loosening torque: 1900 NmSpeed/torque levels: 12Tool holder: external square 1/2 " (12.70 mm)Weight without battery pack: 2.9 kg
Newly developed 1/2" impact wrench with a powerful brushless motor and up to 840 Nm of loosening torque from the professional LTX series.Torque adjustable in 12 stages, integrated LED work light for perfect visibility in any light, weight without battery: 1.4 kg.Ideal for universal use and screws up to M24.Supplied as a set with the wrench, matching Metabox, charger, and two 18V/4.0 Ah batteries.
These pliers are needed for a straight cut for ropes and bowdens without them becoming unraveled or crushed. With locking mechanism.To unlock, press the pliers handles together and release them. In order to maintain the cutting performance, it is not recommended to use the cutter for other purposes!
Step drills are ideal for drilling in the following materials: - Alloyed and unalloyed sheet metal, profiles and pipes. - Copper, brass and aluminum. - EElectricians: Drilling panels and switch cabinets for cable installations. - SHK: Access holes in pipes and lines. - Metalworkers: DrillingStep drills save costs compared to conventional drills: - one drill for different diameters. - the optimum solution for enlargingMILWAUKEE® advantages:Center punching, drilling and deburring in one stepRAPID STRIKE™ drill tip for easier centering.Special drill point and special step geometry enable chatter-free drilling. Reduced risk of jamming at high speeds.Optimized 2-spiral geometry with sharpened edges for up to 2x faster drilling progress.Made of special steel with black oxide coating for up to 4x longer service life.Optimized for use with cordless tools.Laser marking of the diameters.Each step is relief-ground for optimum drill feed and automatic deburring.Shank with 3 clamping surfaces for a secure hold in the drill chuck and optimum power transmission.
A 150-piece assortment with threaded rivets made of steel M3X9-M10x21 in a sturdy plastic case
A 150-piece assortment with threaded rivets made of aluminum M3x9-M10x21 in a sturdy plastic case
A 300-piece assortment with threaded rivets made of steel / aluminum M3X9-M10x21 in a sturdy plastic case
The 1.5 t wheel trolley from Mammuth is a versatile tool for safely lifting and maneuvering large wheels for construction and agricultural machinery, etc.With a load capacity of 1500 kg, it can transport large wheels.The integrated safety bar is fully height-adjustable and enables safe and stable positioning during transportation and provides additional control for safe handling.Its freight-friendly assembly concept provides a cost-efficient solution for transportation and storage, as it can be easily assembled on site.Equipped with eight high-quality steel ball bearing castors, the dolly ensures smooth, seamless movement under heavy loads, reducing effort and increasing efficiency.With its 4 swivel wheels, two of which are braked, the dolly offers excellent maneuverability and control, allowing for easy steering and stable, secure positioning when required.Technical data:Lifting capacity: 1500 kgLifting height range: 0 - 750 mmWheel diameter range: 1000 - 2000 mmMax. width of castors: 810 mmMaterial: steel
Tire inflation gauge with illuminated display For checking and inflating tiresPressure gauge is well protected from knocks by rubber casingProfessional versionWith quick connectorCertified according to DIN EN 12645:2015Technical data:Pressure gauge diameter: 80 mm Measuring range: 0 - 12 barAverage air requirement, approx. 900 l/min Material: TPR coated, die-cast aluminum housing, PVC and rubber hoseWorking pressure: 12 bar Compressed air hose inner diameter: 6 mmConnection thread: ¼”
The ~2-door hinged door cabinet ~GWS from Gde is the ideal storage space for your workshop. ~With its dimensions of 85 x 40 x 185 cm WXTxH, it offers plenty of space for tools, materials and accessories. ~Delivered unassembled. Perfect in combination with the workbenches and perforated walls of the Gde Eco Line. ~2 doors with central locking4 shelves, high-quality galvanized (height adjustable in 35 mm increments) quick assembly2-way lockingMax. Load capacity of the shelves: 30 kg eachPowder-coated sheet steelDelivered unassembledThe advantages of the GWS tool cabinet:Safe storage space for Your toolsOrder and overview in the workshopLots of space for all your toolsRobust and durableEasy to assemble ~
A handy tool case that contains the perfect basic or initial equipment. This 241-piece tool set made of chrome vanadium and carbon steel ranges from the classic screwdriver assortment, a ratchet with various socket wrenches, several pliers and open-ended wrenches to a saw and a large assortment of bits including long bits. A spirit level, meter stick, hammer etc. are of course also included. The case also contains a practical assorted box with various fasteners such as nails and screws. Contents: 3 pliers: Side cutters, combination pliers, water pump pliers1 open-end wrench1 meter rule 2m6 combination wrenches: 8, 10, 13, 15, 17, 19 mm5 precision screwdrivers: PH0, PH1, SL1.6, SL2, SL2.51 spirit level1 trapezoid knife with 10 spare blades1 set of 11 Allen keys1 screwdriver with ratchet function4 screwdrivers: PH1*75, PH2*100, SL5*75, SL6*1001 electrician's screwdriver1 saw with 3 spare saw blades1 file1 3/8" reversible ratchet (72 teeth)1 extension 3/8": 3"6 sockets 3/8": 13 - 18 mm11 sockets 1/4": 4, 4.5, 5, 5.5, 6 - 12 mm2 spark plug sockets 3/8": 16, 21 mm1 adapter 3/8"-1/4"1 hammer (300g)30 bits, assorted10 long bits, assorted1 bit holder/extension 60 mm1 roll of insulating tapevarious fasteners
T-STRIKE™ features a striking cap to protect the tool and allow for better access to worn or rusted screws – with a continuous short side and a long side with a TX tip for Torx screws.Easy size identification thanks to clearly visible markings on the tool and tool holder.T-handle tool holder, magnetic or screw-mountable, for simple and optimal workshop organization.Contents: TX 9, 10, 15, 50, 25, 30, and 40.
Practical turntable for easy use of the vice on long workpieces. Forged from steel. Suitable for vice HM 125.
for cleaning carburetor parts, jewelry, watch straps, coins, collector's itemsEffectively removes dirtHousing, container and lid made of stainless steel (rustproof)Container size: 154 x 88 x 65 mmUltrasonic power: 35 wattsTime setting: 0 - 30 min (18 time steps)Ultrasonic frequency: 42 kHzTechnical dataLength: 128 mmWidth: 110 mmHeight: 180 mmGross weight: 1293 gMains frequency: 50 - 60 HzMains voltage (AC): 220 - 240 VCapacity: 0.7 l
This 2-door wall cabinet with practical integrated perforated panel 2 height-adjustable shelvesPerfect in combination with matching workbenchStandardized perforation: square, 9 x 9 mm, hole spacing 38 mmPowder-coated sheet steelSupplied unassembledTechnical data:ShelfNumber of shelves: 2 pcs.Load capacity of the shelf: 8 kgHole matrix: 9 x 9 mmPunching: 38 x 38 mmNumber of doors: 2 pcs.Depth: 200 mmWidth: 1,709 mmHeight: 600 mm
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.