Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Universal hooks for garages, cabins, storage rooms, cellars etc.Suitable as ladder hooks, equipment hangers, bicycles or for garden furnituretube ends sealed with plastic end caps, partially immersion-insulated to protect sensitive material,made of sturdy tube (12 x 12 mm).Secure and simple attachment for wall mounting with 2 pre-drilled screw holes each,incl. fixing material. Max. Load capacity: 40 kg when using the enclosed fixing material in concreteMaterial: steel Surface treatment: galvanizedScope of delivery:4 wall and ceiling hooks, 120 x 80 mm, max. load 40 kg8 screws PZ2, 40 mm8 dowels, 6 x 30 mm
Modern, powerful compact welding inverter - built using modern inverter technologyIdeally suited for assembly work (on ladders, scaffolding, ...) and generally also for outdoor work thanks to protection class IP 21SSuitable for use on generators, e.g. in workshops, harbors, chemical plants, schools, metal construction, on construction sites, ships or for farmersSealed circuit board protects against moisture, salt spray and corrosion. Therefore also suitable for offshore useHot start: The arc ignites safely and is immediately stable thanks to the adjustable short-term increase in welding currentAnti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, preventing the electrode from annealingWith WG DC LiftArc ignitionArc force control: Internal monitoring of the welding current and welding voltage ensures that short circuits are resolved quickly and safely. The adjustable increase in current stabilizes the arc and the electrode can be processed without any problemsVRD (Volt Reduction Device): Voltage reduction when idle Scope of delivery:3 m welding cable 25 mm² with electrode holder 300 A3 m earth cable 25 mm² with earth clamp 300 ATechnical data: Dimensions and weights:Length approx.: 495mm Width/depth approx.: 190mmHeight approx.: 350mm Weight (net) approx.: 11.8kgAdjustment range:Electrode setting range: 20 - 250A TIG setting range: 20 - 250ADuty cycle:Duty cycle at max. current 40°C Electrode: 60% Duty cycle at max. current 40°C TIG DC: 60%Current at ED 100% 40°C Electrode: 200A Current at ED 100% 40°C TIG DC: 200AElectrical data:Supply voltage: 400±10% V Mains frequency: 50/60HzElectrode:Weldable electrodes: 1.6 - 5.0mm Standards and approvals:Standard: EN 60974-1:2012, EN 60974-10:2014 EMC class: AExplanation EMC class: This class A welding equipment is not intended for use in residential areas in which the power supply is provided by a public low-voltage supply system. Marking: CEPower consumption:Electrode power consumption: 8.5kVA Power consumption TIG DC: 6.3kVAElectrical connection:Required generator power: >10kVA Positive mains voltage tolerance: 10%Negative mains voltage tolerance: 10% Open circuit voltage: MMA 70.1/ TIG 69.4VConnection cable length: 2.2m Current consumption electrode: 17.7ACurrent consumption TIG: 13.1A Total electrode power: 10kVATotal power TIG: 7.4kVA
This industrial vacuum cleaner is a powerful but quiet wet and dry vacuum cleaner for all jobs where a normal vacuum cleaner reaches its limits.The vacuum cleaner removes all types of dirt, including coarse dirt and flooding in the house, cellar, garage and is also suitable for outdoor use. Durable stainless steel tank, carrying handles on top and on the side, storage space for cables and accessories on board, rear blower connection, 4-wheel castor for easy mobility, machine socket included.Tank capacity: 30 liters Cable length: 5.5m Cubic meters/minute: 2.83 Water pressure: 2039 mmPower: 1400 watts - 220-240 V, 50-60 HzReorder dust bag standard: Faie No. 124971 Additional article: Telescopic metal tube adjustable: Faie No. 124973 Scope of delivery and accessories: 2.1 m 32 mm lock-on hose3 x extension rods 254 mm wet/dry nozzle crevice nozzle adapterCartridge filterFilter bagFoam cover
This industrial vacuum cleaner is a powerful but quiet wet and dry vacuum cleaner for all jobs where a normal vacuum cleaner reaches its limits.The vacuum cleaner removes all types of dirt, including coarse dirt and flooding in the house, cellar, garage and is also suitable for outdoor use. Power: 1400 wattsReorder dust bag standard: Faie No. 124971 Additional article: Telescopic metal tube, adjustable: Faie no. 124973 Scope of delivery and accessories: 2.1 m 32 mm lock-on hose3 x extension rods 254 mm wet/dry nozzle crevice nozzle Swallow nozzle Tool holder Filter bag Cartridge filterFoam cover
This industrial vacuum cleaner is a powerful but quiet wet and dry vacuum cleaner for all jobs where a normal vacuum cleaner reaches its limits.The vacuum cleaner removes all types of dirt, including coarse dirt and flooding in the house, cellar, garage and is also suitable for outdoor use. Tank capacity: 30 liters Cable length: 3.5m Cubic meters/minute: 2.83 Water pressure: 2039 mmPower: 1400 watts - 220-240 V, 50-60 HzReorder dust bag standard: Faie No. 124971 Additional article: Telescopic metal tube adjustable: Faie No. 124973 Scope of delivery and accessories: 2.1 m 32 mm lock-on hose3 x extension rods 254 mm wet/dry nozzle crevice nozzle Swallow nozzle Tool holder Filter bag Cartridge filterFoam cover
Practical tool for the easy and safe assembly of larger and heavier wheels. ~The tire mounting device allows you to easily lift and turn the wheel to be mounted. ~Also makes it easier to transport the tire to the vehicle. ~For bikes up to max. 70 kg. Roll spacing approx. 50 cm.Instructions: Disassembly: ~Simply slide the assembly aid under the wheel to be changed, lift it slightly and roll it back. ~For assembly, push it towards the wheel bolts in the reverse order.To center the wheel bolts, simply turn the wheel on the two rollers and you can easily center the wheel bolts and holes
A work trestle is a versatile and indispensable tool in any yard. With its robust construction, it supports you in a wide variety of tasks, such as sawing wood or holding heavy workpieces. The work trestle provides a stable work surface and can be adjusted in height so that you can work without straining your back. Thanks to its foldable legs, it can be stored to save space and transported easily.A work trestle makes your work easier and ensures greater safety. Thanks to its non-slip feet, it remains stable even on uneven surfaces. Height-adjustable legs for an optimum working heightCompact transport dimensions and easy assembly in secondsAdjustable, lateral squared timber supports to connect two trestles togetherOpenings for clamps or screw clamps and for fixing semi-stationary machines such as a cross-cut sawAdditional support brackets on the legsSwivel feet to compensate for uneven surfacesCarrying handle for easy transportation Technical data:Weight: 10.2 kgMax. Load capacity, single: 590 kgHeight: 615 - 820 mmDimensions, set up: 1160 x 980 x 820 mmDimensions, folded: 110 x 980 x 142 mm
Deine Werkbank, die durch ihre stabile Konstruktion, eine einfache Montage und diverse Ausführungen besticht.Die höhenverstellbare Füße bieten eine einfache Möglichkeit zur Feinjustierung.Die besonders robuste Arbeitsplatte ist aus Gummibaum-Holz gefertigt und somit 50% härter als beispielsweise eine Eichenholz-Platte.Nicht missen möchte man außerdem den Vollauszug der Schubladen, welche je mit bis zu 30 kg belastbar sind und auf kugelgelagerten Führungsschienen laufen.Die maximale Belastung der Werkbänke beträgt 300 kg, des Weiteren sind die verbauten Türen abschließbar und werden inklusive Ersatzschlüssel geliefert.Arbeitsplatte aus Gummibaum, stäbchenverleimt, sehr hart (ca. 50% härter als Eiche), unempfindlich gegenüber Feuchtigkeit, pflegeleichtTisch bis max. 300 kg belastbarSchubladen bis max. 30 kg belastbarSchubladen mit Vollauszug, kugelgelagertArbeitshöhe: 850-885 mm durch Nivellierfüßeabschließbare Türen (inkl. Ersatzschlüssel)Lieferung erfolgt unmontiert, mit zweigeteilter ArbeitsplatteTechnische Daten:Breite Arbeitsplatte: 1709 mmTiefe Arbeitsplatte: 600 mmStärke Arbeitsplatte: 30 mmArbeitshöhe: 850-885 mmSchublade:Tragfähigkeit der Schublade: 30 kgSchublade klein:Anzahl Schubladen: 6 Stk.Breite der Schublade: 440 mmHöhe der Schublade: 115 mmTiefe der Schublade: 400 mmTragfähigkeit der Schublade: 25 kgAnzahl der Türen: 2 Stk.Türe BxH: 465 x 390 mmMaterial: GummibaumholzTiefe: 600 mmBreite: 1.709 mmHöhe: 850 mm
The 6-piece equipment set from Güde is the perfect solution for furnishing your workshop. Whether as initial equipment for your hobby workshop or to supplement existing equipment - a large hinged door cabinet, a wall cabinet and two different workshop trolleys offer plenty of storage space for your equipment. All pieces of furniture are lockable, which means that machines and tools can not only be stored neatly, but also safely. Of course, we have also thought about the clear organization of those tools that must always be ready to hand. The large perforated rear panel with standardized perforations is ideal for this. In this respect, the 28-piece Güde tool holder range is the perfect addition. The worktop of the workbench is made of rubberwood, which is characterized by its extreme hardness and the associated robustness, insensitivity and the resulting longevity. Technical data:CabinetNumber of shelves: 3 pcs.Shelf load capacity: 30 kgDepth: 450 mmWidth: 760 mmHeight: 2050 mmNet weight: 40.2 kgWall cabinetNumber of shelves: 1 pc.Shelf load capacity: 5 kgHole matrix: 10 x 10 mmPunching: 38 x 38 mmDepth: 200 mmWidth: 1600 mmHeight: 600 mmNet weight: 15.5 kgPerforated panelHole matrix: 10 x 10 mmPunching: 38 x 38 mmDepth: 12 mmWidth: 1600 mmHeight: 600 mmNet weight: 4.4 kgWorkbenchWorktop width: 1600 mmDepth of worktop: 500 mmWorktop thickness: 25 mmWork
Hydraulic lifting platform with a load capacity of 4.0 tons and a lifting height (including extension) of up to 2050 mm. The platform features automatic unlocking of the safety flaps during lowering. Manual unlocking is therefore not necessary. A solid compensating wire rope ensures optimum synchronization and additional safety. The support arms are 2 and 3-stage telescopic and have height-adjustable and rubberized support points. Technical data: Motor 2.2 kW 230 volts Note: Due to the starting current, a slow-blow fuse may be required. Dead weight 630 kg, total height: 2884 mm, total stand width: 3385 mm, delivery includes steel bolt anchors and support point extension in cardboard box/wooden crate for self-assembly. Very robust platform for the demanding DIY enthusiast or semi-professional.
Hydraulic lifting platform with a load capacity of 4.0 tons and a lifting height (including extension) of up to 2050 mm. The platform features automatic unlocking of the safety flaps during lowering. Manual unlocking is therefore not necessary. A solid compensating wire rope ensures optimum synchronization and additional safety. The support arms are 2 and 3-stage telescopic and have height-adjustable and rubberized support points. Technical data: Motor 2.2 kW 400 volts, net weight 630 kg, total height: 2884 mm, total stand width: 3385 mm, delivery includes steel bolt anchors and support point extension in cardboard/wooden box for self-assembly. Very robust platform for the demanding DIY enthusiast or semi-professional.
Fully synthetic, self-mixing oil for all 2-stroke engines, low smoke, suitable for catalytic converters, mixing ratio up to 1:100 according to manufacturer's instructions
Mineral quality 2-stroke engine oil, mixing ratio up to 1:50 according to the manufacturer's instructions
Content: 5 l (€7.99 / 1 l)
Practical jack with a 2.5-ton lifting capacity.Highly stable thanks to its hybrid aluminum/steel construction, yet relatively lightweight at 27 kg.Quick-lift system with a dual hydraulic pump, operated via a foot pedal, for easy use.Includes an additional height adapter as standard, allowing for lifting heights up to 541 mm.Height without adapter: 85–465 mm.
Solid metal petrol canister with safety pressure cap. Dimensions: HxWxD: 47x16.5x34cm.
With pouring spout with screw connection and carrying handle.Now as a 5-pack value set!
Solid metal petrol canister with safety pressure cap. Dimensions: HxWxD: 47x16.5x34cm.Now on sale as a 5-pack value set!
Ideal for ball bearings, discs, etc.
8 mm,3 meters usable length with 4 shortenings, with ring and load hook, with test sticker, load capacity: at 45 - 4250 kg, at 60 - 3000 kg.
The Husqvarna 40-B220X has an unbeatable capacity-to-weight ratio, as its runtime has been further optimised while maintaining the same size and weight. The Husqvarna 40-B220X is a versatile 36 V battery with a capacity of 6 Ah, ideal for most professional battery applications. State-of-the-art cell technology offers an excellent weight-to-capacity and power-to-weight ratio. The robust design meets IPX4 for use in all weather conditions with all Husqvarna professional 36 V equipment. The ActiveCool system cools the battery both during operation and charging for better performance. Connectivity via Bluetooth with Husqvarna Fleet Services.The 40-B220x battery is the successor to the Husqvarna Bli200 battery.Technical data: 6.0 Ah, 36 V, 216 Wh, 1.44 kg.
This battery pack, with a voltage of 36 V and a capacity of 10 Ah, ensures long running times for demanding forestry and gardening tasks. The advanced Li-ion cell technology offers a balanced ratio of power to weight, whilst the ActiveCool system cools the battery during operation and charging, thereby extending its service life. Thanks to its IPX4 protection rating, the battery remains reliably operational even in changing weather conditions. Benefits & Features • 10 Ah capacity for long working intervals without frequent recharging • ActiveCool cooling supports consistent performance and a longer battery life • IPX4 protection rating for reliable use in varying weather conditions Frequently Asked Questions Which tools is the battery suitable for? The battery is part of the Husqvarna BLi-X 36 V battery system and can be used with numerous compatible Husqvarna tools. What is the battery’s capacity? The battery has a capacity of 10 Ah and an energy content of 360 Wh. Is the battery weatherproof? Yes, the casing meets protection class IPX4 and is designed for use in all weather conditions. Translated with DeepL.com (free version)
High-quality drill bits with a centering tip for all types of wood, including softwood and hardwood. Contents: 1 each of 15, 20, 25, 30, and 35 mm drill bits. Comes in a wooden case.
L content, 400 mm . Ideal for changing oil and cleaning spare parts. With hump to support small parts. Beak for easy removal Made of polyethylene - therefore oil and acid resistant.
For heavy-duty precision drilling in softwood or hardwood. Features a Lewis spiral for rapid chip removal, ensuring fast and clean drilling.Hexagonal shank for a secure hold in the drill chuck. Contents: 1 drill bit each in 8, 10, 12, 14, 16, and 18 mm, 230 mm long.Supplied in a plastic case.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.