Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
The sharp and aggressive toothing is ideal for fast cuts in wood.Suitable for wood Length: 105 x 4 mm 5 piece pack
The following blades have an extra-strong blade body for maximum stability and clean cuts. Ideally suited for wood applicationsLength: 105 x 4 mm 5 piece pack
Conventional jigsaw blades for good cutting performance.Suitable for wood and plasticLength: 75 x 3 mm5 piece pack
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compact laser rangefinder with an operating range of 0.05 to 20m. 4 measuring functions: Length measurement, area measurement, volume measurement and continuous measurement. Simple operation and large display for effortless work. Integrated horizontal bubble level for accurate measurement. Deviation at 20m max. +/-2mm. Dimensions: 105x47x27mm, weight only 103g. Supplied complete with belt pouch, wrist strap, batteries and quick-start guide.
Robust chain hoist with a maximum load capacity of 1.5 T. Lifting height 1500mm. Secure hold thanks to the load pressure brake and rotating safety load hooks. ~The chain can be pulled through quickly thanks to the chain freewheel circuit. Weight: only 10.8 kg.
Intelligent battery management for long-lasting battery packs with a 3-year guaranteePatented "AIR COOLED" charging technologyPermanent electronic single cell monitoring (ESCP) during charging, for a particularly long service lifeProcessor-controlled charging and discharging managementCapacity display for permanent monitoring of the charge statusLong shelf life with virtually no self-discharge
Sola line laser with only 0.2mm/m +/- measuring tolerance. Self-leveled up to -/+3°, application range up to 30m. For simple and precise marking of horizontal and vertical lines for interior work, tiling, pipe installation, substructures, etc. Dimensions: 110x70x100mm. Supplied in a promotional set incl. batteries (operating time 8 hours), case and universal wall bracket
For extracting engine, transmission and other lubricating oils, also suitable for other liquids with low viscosity, such as water and antifreezeCan be used in the car, motorcycle, shipbuilding and industrial sectorsCan be operated manually using a hand pump, making it independent of compressed airTransparent container for checking the fluid levelCapacity: 5.5 lWeight: 2.48 kgDimensions: approx. 220 x 220 x 600 mmScope of deliverySuction unitSuction pipe, Ø 10 mm, length 400 mmSuction pipe, Ø 6 mm, length 750 mm
Hand winch for horizontal pulling of loads.Can be used in a variety of areas without electricity, such as in the garage, in the garden, on trailers or in forestry and agriculture.Equipment:20 m steel cableLoad hook with teardrop openingIntegrated brakeHand crank with soft gripBase plate with holes for permanent mounting on suitable Support points. ~Technical data: ~Max. Tensile force without pulley: 720 kgMounting plate LxW: 140 x 86 mmLength: 360 mmWidth: 270 mmHeight: 160 mm
With brushless motor - particularly efficient, durable and maintenance-freeFor low-burr sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolantApplication e.g. in metal construction, joineries, interior fitters etc.Easy to transportFour speeds selectable at the touch of a buttonMotor with soft startDigital display showing the selected speed and current power in wattsAngle adjustment 0° - 45° for mitre cutsVice with quick adjustmentLarge LED work light on the underside of the handle to illuminate the work areaWith spindle lock for quick saw blade changeTechnical data: Saw blade speed(s): 700 / 900 / 1100 / 1300 min¯¹ Saw blade diameter: 355 mmMitre angle:_l0 - 45° Dimensions and weight:Weight: approx. 25 kg Electrical data:Drive motor power: 3.5 kW Supply voltage: 230 VMains frequency: 50 Hz Cutting capacity 0° (round) pipe: 130 mm Cutting capacity 0° (square) pipe: 125 x 125 mmCutting capacity 0° (rectangular) pipe: 170 x 110 mm
Handy compressor, innovative design. ~The compact design, the sturdy plastic wheels, the extendable handle and the low weight (only 12kg) make it easy to transport. ~No oil change due to the oil-free compressor necessary. Quietly running compressor with a maximum output of 180L/min and 8 bar maximum pressure. ~Of course complete with pressure regulator for continuous adjustment of the working pressure, pressure gauge and one-hand quick coupling. ~Ideal compressor for mobile use in the home and hobby area.
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Very comfortable with ergonomically padded headrestHandle and six oil-resistant swivel castorsPractical side storage areas ~Static support load max. 120kg Dimensions (lying position): (L x W x H) 1010 x 475 x 130mm Weight (net): approx. 4.8kg
Sturdy metal saw with high cutting accuracy and large cutting range. Cutting pressure adjustment via HY cylinder. Saw blade tension precisely adjustable via pressure gauge. Automatic limit stop at the end of the cut. Drive via a 2-stage gearbox means cutting speed can be changed in seconds and there is no slipping or wear of V-belts. Complete with base frame, coolant pump, swivel saw arm and bi-metal saw blade.Technical data:Motor power 1.1 kW / 400 VoltCutting range round: 225 mm at 90°, 160 mm at 45°Cutting range square: 245x180 mm at 90°, 160x160 mm at 45°Saw blade speed: 45/90 m/min switchable via 2-stage motor.Saw blade dimensions: 2480 x 27 x 0.9 mmDead weight: 185 kgDimensions: 1400 x 685 x 1235 mm
Mètre à ruban pratique dans un cadre en V en métal léger anodisé, le ruban est en plastique jaune renforcé de fibres de verre, Impression de la graduation en mm jusqu'à la longueur de 20 cm, longueur restante avec graduation en cm jusqu'à la fin du ruban, sur roulement à billes, forme ergonomique avec picots de préhension, bras de manivelle rabattable et position de stationnement pour le début de la bande afin de la protéger contre les dommages pendant le transportclasse de précision CE II
Care, maintenance and protection of machines, devices, precision tools, measuring devices, molds and punches For lubrication when cutting threads Ideal for long-term preservation even at high humidity and aggressive Ambient airContains no waxes, silicone or TeflonProtects against rust for a long timeDisplaces moistureEliminates squeaks and creaksFor loosening stuck screw connections and jointsApplication temperature from -40C to +150CIs used in industry and trade, in all types of vehicles, in shipping , agriculture, in the home and garden as well as fishing equipment
Content: 0.2 l (€44.75 / 1 l)
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
Pulley with hook for electric wire rope hoists, with hook and pulley.
With flawless toothing: Several of the 72 teeth engage simultaneously and transmit extreme torque. Switch lever for clockwise and counter-clockwise rotation. Unlocking mechanism: release the inserts at the touch of a button. Head and shaft forged from a single piece of CrV steel. 2x nickel-plated and matt chrome-plated. Handle made of oil and acid-resistant TPR (thermoplastic rubber) with practical hole for hanging.
With changeover function directly on the ratchet mechanism. Several of the 52 teeth engage simultaneously and transmit extremely high torques. Unlocking mechanism: release the inserts by pressing a button. Head and shaft forged from a single piece of CrV steel, nickel-plated twice and matt chrome-plated. Handle made of oil and acid-resistant TPR (thermoplastic rubber) with practical hole for hanging.
With changeover function directly on the ratchet mechanism. Several of the 52 teeth engage simultaneously and transmit extremely high torques. Unlocking mechanism: release the inserts by pressing a button. Head and shaft forged from a single piece of CrV steel, nickel-plated twice and matt chrome-plated. Handle made of oil and acid-resistant TPR (thermoplastic rubber) with practical hole for hanging.
The ratchet has a high level of durability and transmits up to 700 Nm of torque.This is achieved with a durable mechanism with only 24 teeth and a long handle. Due to its robustness, it is used for loosening or screwing stubborn screw connections, such as B. used on tire rims in cars.Material: Premium Flex chrome vanadium steelHousing drop-forged chrome-plated according to industry standard ISO 1456:2009Advantages:High durabilitylong lever (465 mm)24 teeth
Short exposure time - quick cleaning of the rimsThe Ballistol rim cleaner is an extremely powerful gel cleaner with an effectiveness indicator. This means that a color change occurs as the effective power increases (the cleaner turns purple). ~Removes stubborn dirt such as brake abrasion, oil and rubber residues highly effectively and automatically. If used regularly, it can be diluted for light dirt. Also suitable for TPMS (tire pressure monitoring system).Cleaning status is indicated by a change in colorFoams up when sprayedRemoves light dirt Rust filmTested material compatibility for all rims (steel, high-gloss aluminum, multi-piece, matt)Neutral to rubber and painted surfacesOdor-reduced, acid-free and biodegradable< /li>without nanotechnology APPLICATION: Spray rims generously from a short distance (approx. 30 - 40 cm) and allow to take effect for 2 to 6 minutes. If there is particularly stubborn dirt, repeat the cleaning process, using a rim brush or microfiber cloth if necessary. Then rinse completely with a powerful jet of water or high-pressure cleaner.Notes: Rinse thoroughly, do not allow to dry and do not use in the blazing sun or on heated surfaces. Protect Ballistol rim cleaner from frost. ~ ~Danger warning: Harmful if swallowed. May cause allergic skin reactions. Causes serious eye irritation.Appearance: viscous, orangeOdor: product-specificpH value: 5.5Relative density: 1.11 g/cmViscosity kinematic: approx. 19mm/sSolubility in water: miscible
Content: 0.75 l (€21.20 / 1 l)
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.