Liquid manure
Hose connection with cup, galvanized, suitable for Perrot
Lever lock ring and rubber ring, galvanized.
Hose end DN150 with angle iron, galvanised
The galvanised steel hose end piece is a practical accessory for the slurry hose. It is fitted with a lateral angle iron which protrudes from the spout. The hose end piece prevents the slurry hose from sticking to the container or pit floor. The slurry hose is fastened with wide band clamps.The total length is 370 mm. The spout is 220 mm long.
Hose set 2 C-coupling professional
Professional flat hose with a length of 20m. Inner diameter 52mm. Abrasion-resistant and stable hose for a long service life. Temperature range -30 to +80 C. Operating pressure 13 bar, burst pressure 40 bar. Complete with Storz C coupling.
Content: 20 m (€9.00 / 1 m)
Hose set 2 inches 20 m
Construction flat hose made of polyester braid with PU inner coating, operating pressure 10 bar. Complete with 2 Storz C couplings.
Content: 20 m (€4.00 / 1 m)
Hose set 3' 20 m
Construction flat hose with 10 bar maximum pressureInner diameter 75 mm.Complete with Storz B couplings.
Content: 20 m (€7.98 / 1 m)
Hose set B 20m professional
High-quality flat hose in bright orange. Good abrasion resistance and long service life. Temperature range -30 to +80C. Operating pressure 13 bar, bursting pressure 40 bar, length 20m. Complete with Storz B coupling.
Content: 20 m (€13.90 / 1 m)
Hose ties stainless steel W4
Stainless steel hose ties RUST FREE, version W4. All individual parts are made of stainless steel AISI 304. The edges of the wide band clamps are crimped to ensure easier installation.
Level indicator for liquid manure tanks
For visually checking the fill level of manure tanks or water tanks. You can see at a glance how much the barrel has emptied or filled. The level indicator is welded into the front face of the barrel. The flange size is 180x180mm. The length of the rod to which the float is attached is adjusted to the barrel size.The rod, bearings, washers and screws are made of AISI 304 stainless steel.
Lever lock ring, black
Lever locking ring, galvanized, suitable for the Bauer system
Lever set MZ with clamping screw
To fix the slider in the open position.For brass manure sliders and knife sliders.
Lever slide with threaded connection
Brass lever slide with internal thread.
Manure scraper cylinder
Fully galvanized, hydraulic connection 12L, thread M18x1.5. Single-acting, reset by maintenance-free gas spring, screw-in thread on the manure scraper M30x2.
Manure scraper with 2 flange connection, lightweight design
Flange hole pattern 150x150 mm, bore 13 mm
Manure scraper with 2 flange connections and reduced tendency to clogging, heavy-duty design
Due to the enlarged housing to 102 cm and the resulting larger gaps in the flow area, these manure scrapers are no longer as susceptible to clogging due to solid particles (straw, hay, leftover feed, etc.) in the manure. See also heavy-duty manure scraper with threaded connection. Max. pressure 4 bar. Flange hole pattern 150 x 150 mm
Manure scraper with flange and threaded connection
Flange hole pattern 150x150 mm, bore 13 mm
Manure scraper with threaded connection, heavy duty
Due to the enlarged housing to 102 cm and the resulting larger gaps in the flow area, these manure scrapers are no longer as susceptible to clogging due to solid particles (straw, hay, leftover feed, etc.) in the manure.
Manure scraper with threaded connection, lightweight design
Mug, black
Includes rubber ring.
Overflow valve with 2 balls
The overflow valve has a connection for a pressure relief valve with a 2? internal thread and for a vacuum gauge with a 3/8? internal thread. The large float ball is a lightweight PVC ball. The smaller PVC ball attached to the sealing lip is heavier in order to achieve optimal sealing.
Pipe bend 90° Perrot system with ball and cup including sealing ring
Galvanised 90° elbow with ball and cup suitable for the Perrot system. The gimbal ring with 2 locking hooks is attached to the cup side. The sealing ring for the cup is included in the scope of delivery.4 inch = DN 108, cup width B = 150 mm, ball diameter D = 154 mm5 inch = DN 133, cup width B = 171.5 mm, ball diameter D = 179 mm6 inch = DN 159, cup width B = 203.5 mm, ball diameter D = 210 mm8 inch = DN 216, cup width B = 287 mm, ball diameter D = 312 mm
Pipe bend 90� with sealing ring
Pipe bend 90 with ball and cup including sealing ring
Pipe bend 90� with sealing ring, galvanized
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
