Products

​high-quality PE-coated industrial adhesive tape, coated with natural rubber adhesiveis characterized by its high initial tack - even at low temperaturesvery good adhesion on different surfacesexcellent unwinding propertiesRoll width 50 mmRoll length 50 mAreas of application:Claw care, repair, waterproof packaging, protection, covering, fixing, labeling, packaging, bundling

Armrest 65 x 270 mmGrammer No: 1167905

Original army boots in quality that has been tried and tested for decades. Best fit, tested on ice, snow and scree, very durable, sure-footed, water-repellent. Ideal for use as work and forestry shoes. Size 39 - 47.

Made of stainless steel, length 17 cm

Piston rod 90 mm, internal thread M36x4, bore bolt 30.2 mm, connection R1/2?IG.For subsequent installation or for cost-effective repairs. These articulated cylinders are installed using the spindle halves already present in the loading wagon.

For subsequent installation or for cost-effective repairs. These articulated cylinders are installed with the spindle halves already present in the loading wagon.Piston rod 60 mm, internal thread M24x3, bore bolt 25.25 mm, connection M14x1.5 ITPlease note when ordering the design of the cylinders in left and right!The photo shows an articulated drawbar cylinder on the left.

Holder for top link (joint block)

Trendex Artificials floating is a top bait for trout and other small predators and is indispensable on every trout lake. Standard size, contents 15 pieces.

Trendex Artificials floating is a top bait for trout and other small predators and is indispensable on every trout lake. Jumbo size, contents 10 pieces.

Caramel-colored protein casing for scalding (up to +75C) and smoking (up to +90C) sausage products. Attention! ~Before filling, soak the casing in a 10-15 salt solution for 15 minutes % (1/2 glass to 1 liter of water) and soak at a temperature of 20 5C. Tie the bulging sausage casing and subject it to the appropriate heat treatment.

Artificial casing for cheese sausage in a 25-piece bundle ensures even filling and stable shape during the production of cheese sausage with creamy filling. The smooth surface supports a clean process flow and controlled processing with reliable portioning. Advantages & functions • Constant caliber – uniform sausage size for clean processing and stable appearance • Tear-resistant plastic – robust structure during filling and processing, reduces losses • Smooth inner surface – facilitates filling and ensures even flow Frequently asked questions Is the casing suitable for cheese sausage? Yes, it is specifically designed for cheese sausage with filling and supports stable shapes. Can the casing be heated? Yes, it is heat-stable and suitable for common processing methods. Is the casing reusable? No, it is a hygienic single-use product.

Unprinted artificial casing 60/50 in a 25-piece bundle ensures even filling and a stable shape for large-caliber sausage production without print. The smooth surface enables a clean process flow and precise, controlled handling during processing. Advantages & functions • Constant caliber 60/50 – uniform sausage size for clean processing and stable appearance • Unprinted version – neutral surface for flexible use without labeling • Tear-resistant plastic – stable casing during filling and processing, reduces losses Frequently asked questions Is the casing food-safe? Yes, it is intended for sausage production and is food-safe. Can the casing be heated? Yes, it is heat-stable and suitable for common cooking and scalding processes. What is the unprinted version used for? For neutral products without visible labeling on the casing.

Flexible tractor/tractor front tire for fields and road transport, robust shoulder area, excellent tracking, good rolling behavior characterize this tire, also suitable for planting and seeding machines.

​Noticeably easier and less strenuous cutting. Stihl ASA 20 cordless loppers in a set with AS 2 battery and AL 1 standard charger – makes  cutting work easier, such as maintaining trees, bushes, shrubs, ornamental plants and vines - around the house and in the garden, as well as when working in orchards or vineyards, for example.Cut branches with a diameter of up to 25 mm with ease, powerful performance thanks to 2 blade opening widths. Battery life: up to 2000 cuts up to 25 mm, charging time: 80 minutes to 100%.Translated with DeepL.com (free version)

Aluminum oil air cooler in panel construction. Max. operating pressure 26 bar, protection class IP44.Application: hay cranes, stationary small units

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum flow 150 l/min, max. operating pressure 26 bar, protection class IP55.Delivered without connections and mounting base.Application: hay cranes, stationary small units

Compact, rope-running fall arrest deviceThe ASAP is an essential component of your fall protection system. During normal use whilst moving along the rope, the device moves automatically without requiring manual intervention. In the event of a fall or an uncontrolled descent (> 2 m/s), the device locks onto the rope and arrests you. Choose the length of the fall arrest device to suit your needs, allowing you to work comfortably at varying distances from the rope.Specifications • Rope compatibility: 10 to 13 mm• Certification(s): CE EN 12841 type A, CE EN 353-2, ANSI Z359.15, GB/T 24537, XF 494 : FZL-Z-Q10/13• CE EN 12841 Type A when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS fall arrestor, a CE EN 1891 Type A rope of 10 to 13 mm and an OK TRIACT-LOCK carabiner• CE EN 353-2 when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, an AXIS rope 11 mm with two sewn-in end connections and an OK TRIACT-LOCK carabiner• ANSI Z359.15 when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, an 11 mm BEAM rope with two sewn-in end fittings and a Bm’D TRIACT-LOCK carabiner• Weight: 190 g• Material: aluminium, stainless steel, polyamide

Ash Bucket with Shovel This practical ash bucket allows you to remove ash quickly and cleanly.It is ideal for cleaning fireplaces, grills, stoves, or fire pits. The matching shovel is included.Thanks to the integrated holder, it can be attached directly to the bucket.This way, it is always within easy reach and can be stored in a space-saving manner. The bucket is made of robust, galvanized steel.The shovel handle is made of wood and is comfortable to hold. Dimensions: W x D x H: 35.4 x 33.1 x 34.5 cm Ideal for fireplaces, grills, and fire pits Includes practical ash shovel Holder for easy storage Robust and durable design Material: 99% galvanized steel Steel, 1% Schimaholz ```