Products
For screwing.
Galvanized. Ideally suited for connecting and electrically cross-connecting ropes. Price/piece
The angular gear 1018 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is consistent with the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Please note that before putting the gearbox into operation, fill and check the oil level. The maximum power transmission is 7kW at 540rpm and 11kW at 1000rpm. Compact and light High-quality workmanship High torque Long service life Universal applications< /li>
The angular gear 1018 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is opposite to the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Attention, fill and check the oil level before putting the gearbox into operation. ~The maximum power transmission is 7kW at 540rpm and 11kW at 1000rpm.Compact and light< li>High-quality workmanshipHigh torqueLong service lifeUniversal applications
The angular gear 1020 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is consistent with the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Please note that before putting the gearbox into operation, fill and check the oil level. ~ ~The maximum power transmission is 9kW at 540rpm and 13kW at 1000rpm. Compact and light High-quality workmanship High torque Long service life Universal applications < /ul>
The angular gear 1020 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is opposite to the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Attention, fill and check the oil level before putting the gearbox into operation. ~ ~ The maximum power transmission is 9kW at 540rpm and 13kW at 1000rpm.Compact and lightweightHigh-quality workmanshipHigh torqueLong service lifeUniversal applications
The 2020 angular gearbox is a compact gearbox designed for heavy-duty use. The gearbox has a transmission ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is reversed or the same as the direction of rotation of the input shaft (looking at the visible shaft end). The angular gearbox is equipped with a robust cast housing, a 1 3/8 x 6 PTO profile at the input and an output shaft with a diameter of 25 mm (order no. 65792) and 30 mm (order no. 59917). The gearbox can absorb torque peaks of up to 2 times the nominal torque. We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. The maximum power transmission is 9kW at 540rpm and 14kW at 1000rpm.Compact and robustHigh-quality workmanshipHigh torqueLong service lifeUniversal applications
Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 37 kW (50 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1,46Max. power (540 rpm) approx. 37 kW / 50 hpMax. output torque up to 446 Nm (at 540 rpm)Material High-quality grey cast ironApplication Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.
Powerful one-hand angle grinder with 720 watts and 125 mm disc diameter. Elaborate insulation of the motor provides excellent protection against aggressive fine dust. Slim housing for very good handiness. Robust machine with a very good price/performance ratio. Now with a new safety switch for even more safety and convenience.
Angle grinder set Makita. The Makita angle grinder set is the perfect solution for anyone looking for a powerful and versatile angle grinder.The set contains a 2200 watt angle grinder with a 230 mm disc and an 840 watt one-hand grinder with a 125 mm disc. ~ Both angle grinders are equipped with high-quality components and offer a long service life. The 2200 watt angle grinder is ideal for heavy work such as cutting metal, stone and wood.The 840 watt one-hand grinder is perfect for smaller jobs such as grinding and polishing. ~Both angle grinders are equipped with a quick-release nut, which allows the discs to be changed quickly and easily. ~The Makita angle grinder set is delivered in a practical transport case so that you it can be easily stored and transported. The set is an ideal solution for professionals and hobby craftsmen. Advantages of the Makita angle grinder set: Powerful and versatile angle grinder, high-quality components, long service life, quick-release nut, practical transport case. If you are looking for a powerful and versatile angle grinder, the Makita angle grinder set is the perfect choice for you.
Robust one-hand grinder with 750 watts and 125mm disc diameter. Compact angle grinder with anti-twist protective cover, additional side handle and spindle lock for easy disc changing. Idle speed 11,500 rpm. Weight approx. 1.8 kg.
Robust angle grinder with starting current limiter for soft starting and low network load (extension cable). Rated power 2,000 W, disc diameter 230mm, idle speed 6,600 rpm, weight only 5.2 kg. Inexpensive promotional model in high quality.
Professional two-hand grinder with 2,400 watt Metabo Marathon motor. Disc diameter 230 mm. Maximum service life and optimal ease of use thanks to the soft start/starting current limiter and the Metabo VibraTech system.
Robust universal angle grinder in an ergonomic design with a powerful motor with good overload capacity. Incl. Constamatic full-wave electronics: high work progress thanks to almost constant speed under load.Tool-free, quick disc change at the push of a button with Metabo M-Quick system. Metabo S-automatic mechanical safety clutch: minimizes kick back when blocking the disc to the lowest level on the market - for maximum user protection and rapid further work. Electronic overload protection for a long service lifeElectronic soft start and restart protection Gear housing rotated in 90 steps and can be mounted for left-handed operation or for tensing. Technical data:Grinding discs : 125mmNominal input power: .1400WOutput power: 780WNo-load speed: 11,500 rpm Torque: 3.3Nm Spindle thread: M14 Weight without power cable: 2.2kg Cable length: 4m
Universally applicable one-hand sander with Metabo Marathon motor with patented dust protection. Continuous speed adjustment from 2800 - 10500 rpm thanks to VC full-wave electronics. Ideal for all grinding and cutting work. Despite the powerful 1100 watt motor, very compact design and low weight (only 2.1 kg). Complete with additional handle and M-Quick quick-release nut.
Robust, universally applicable angle grinder in an ergonomic design, with a powerful motor with good overload capacity.Tool-free, quick disc change at the push of a button with Quick System. Protective cover can be adjusted without tools and secured against rotation. Incl. Mechanical safety clutch minimizes kick-back when blocking the disc to the lowest level on the market - for maximum user protection and rapid continued work. Restart protection after power interruption. Technical data:Grinding discs : 125,,Nominal input power: 1,100WOutput power: 700WNo-load speed: 12,000 rpm /minTorque: 3.5NmSpindle thread: M14Weight without power cable: 2.2kgCable length: 4m li>
Galvanized, screw-on, M8A=30, B=M8, C=16 mm
With integrated fuse. It can't open on its own. For tipper bodies and car trailers, galvanized (without eyelet).
For precise angle welding
Dimensions 25.4x3.7 cm
