Products
Brass, for draining condensation from the air tank, venting the pressure lines and air tank
Robust drawers/tool cabinet with 2 drawers each 520x535x150 and 520x535x190mm (WxDxH). Load capacity 80Kg per drawer. Color light gray RAL 7038 and enzin blue 5010. Weight 45kg. High-quality design for tough use in the workshop.
Drawing tiles for marking queens in different colors.100 pieces per plate
Marking plate set for marking queen bees. Each plate contains 100 numbered plates.The set includes:1x green plate 1x red plate 1x Yellow plate1x white plate1x blue plate1x glue1x wooden stick
The long drenching tubeWhat is FLUX used for?For the safe administration of liquids into the rumen.Why is FLUX safe?If the mark is level with the incisors, the end is in the rumen. No swallowing.What is FLUX made of?Stainless steel, with markings, funnel, and GARDENA® quick-release fastener.How is FLUX used?Pull the cow's head forward so that the head, neck, and spine form a straight line. Insert FLUX into the mouth cavity in the area of the toothless jaw edge. Carefully push FLUX forward until the mark is level with the incisors. Connect the funnel. Insert the liquid. Carefully pull FLUX out.How to clean?Connect FLUX to a tap and rinse. Hold the FLUX head up so that the water runs off along the outside of the tube.
Dressage whip with special rubberized handle for optimal grip. Length: 120cm~ Color: Black
Two-tone riding crop. Colored nylon with integrated reflective strips - for better visibility or as a fashionable detail. More safety for you and your horse at night and in fog! Length: 110cm
Nylon-covered basic whip with black plastic molded handle. Length 100 cm, color: black
Tasty dog chews made from pure dried beef meat.Analysis:85.2% crude protein1.98% crude fat7.13% moisture4.58% crude ash2.21% crude fiberContents:360 g
Content: 0.36 kg (€41.53 / 1 kg)
?A natural enzyme preparation in dry form, facilitates the extraction of juices. ~Use in the same way as liquid pectinase. ~The advantage of this product is that it maintains a constant use quality throughout the entire shelf life. ~You can use it at room temperature, without Loss of quality/efficiency, store! ~A pack of 6g is enough for 10-30kg of fruit.1. Pour a small amount of water over the chopped fruit 1-2 L / 10 kg of fruit at a temperature of 40C for berries and 80C for apples, pears, plums and quinces.2. Dissolve the enzymatic preparation in 100 ml of room temperature water.3. If the temperature of the fruit mass is equal to or lower than 40C, the dissolved preparation is added. ~4. Mix well and leave covered in a warm place for 9-15 hours.5. After this time, squeeze the juice.
Dried yeast for honey wines Enovini Honey 10g.It has increased tolerance to high concentrations of sugar and alcohol.It is characterized by low production of volatile acids, sulphites and acetaldehyde.Method of use:Yeast does not require preliminary propagation. The contents of the package should be dissolved in 100 ml of boiled and cooled to 35°C water. Add culture medium with vitamin B1 in the amount of 4.5-11 g/ 10-25 L of mash. To lower the pH, it is recommended to add acidity regulator in the amount of 18-46 g per 10-25 L of honey mash.To increase the acidity of the mash, it is recommended to add acidity regulator at the rate of 18-46 g per 10-25 L of honey mash. Optimum acidity at the start of fermentation: 4-4.5 g/L.
Ground HSS twist drills with high cutting performance and long service life. Contents: yes10 pieces 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5 and 8mm as well as 5 pieces each 8.5/ 9/ 9.5/ and 10mm
Robust design with user-friendly rubber handle.
Professional SDS-Plus 4-cutter drill bit for hard or reinforced concrete.Contents: 5/6/6 x 115 mm, 6/6/8/8/8/10/12 x 165 mm in a PACKOUT-compatible cartridge.
Professional HSS twist drill bits with a special drill tip for precise centering without pre-drilling, even on rounded surfaces – very fast and smooth drilling.Tin-coated tip for extra-long service life and excellent drilling performance in steels up to 1,000 N/mm².25 drill bits with a 0.5 mm pitch and a 3-flat shank to prevent slippage in the chuck (4.0 mm and larger).Supplied in an impact-resistant plastic case.The innovation for effortless, precise, and fast drilling.
Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.19-piece set with drill bits from 1.0 to 10.0 mm in 0.5 mm increments.
Newly developed HSS metal drill bits for steel, alloyed heat-treatable steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure hold in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.25-piece set with drill bits from 1.0 to 13.0 mm in 0.5 mm increments.
Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean results.6-piece set, containing one drill bit each in 2, 3, 4, 5, 6, and 8 mm sizes.
Professional HSS twist drill in a ground design for a long service life and optimal drilling performance. Metal cassette equipped with drill bits from 1.0 - 10.0mm with a pitch of 0.5mm.
High-quality HSS cobalt drill bits for use when drilling high-quality steels up to a strength of 800N/mm2, e.g. stainless steel. Metal cassette from 1.0 to 10.0mm, pitch 0.5mm.
High quality HSS cobalt drill bits for use in high quality steel such as stainless steel. Metal cassette with drill 1.0-13.0mm in 0.5mm pitch
Professional HSS twist drill in ground design for a long service life and optimal drilling results. Metal cassette with drill 1.0 - 13.0mm in 0.5mm pitch.
High-quality HSS drill set for universal use in alloyed and unalloyed steel. Sizes 1.0 - 10.0mm in 0.5mm pitch.
High-quality HSS drill bits from 1.0-13mm with a pitch of 0.5mm for universal use in machining alloyed and unalloyed steel.