Products
To keep the load in one position without leaking oil! The following functions are achieved:Limitation of the oil flow (even in the event of a line break)Prevents a pulling or pushing load from rushing awayPressure limiting functionUse only possible with control valves that have a consumer tank in the zero position -Connection (floating position) havePressure range 60 to 350 bar., max. load pressure 270 bar, control ratio 4.25:1.
Partial ratio 1:1. The incoming oil flow is divided into 2 equal parts regardless of the operating pressure. If the flow direction changes, the partial flows are added back together. Eg for silo tongs with 2 cylinders. If the silo tongs are filled unevenly, the cylinders are subjected to different stresses. This can be prevented with the flow divider.
Bolt-øD=20.5 mm, connection P=G 3/8 inch, G=28 mm, F=40 mm, compressive force 2261 kg, tensile force 1378 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=20.5 mm, cross bushing ØD=20.5 mmCylinder Ø C = 50 mmPiston base Ø K = 50 mm
Bolt-øD=25.5 mm, connection P=G 3/8 inch, G=43 mm, F=45 mm, compressive force 5089 kg, tensile force 3810 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=25.5 mm, cross bushing ØD=25.5 mmCylinder Ø C = 70 mmPiston base Ø K = 70 mm
Bolt-øD=30.5 mm, connection P=G 3/8 inch, G=34 mm, F=55 mm, compressive force 6927 kg, tensile force 4665 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=30.5 mm, cross bushing ØD=30.5 mmCylinder Ø C = 80 mmPiston base Ø K = 80 mm
The valve is used for overpressure or overload protection in 2 pressure lines. It can be used both as a shock valve and as a pressure relief valve for continuous operation. The valve is an ideal protection against sudden pressure surges and enables the setting of different pressures at two inlets of the hydraulic system. The shock valve is used to protect hydraulic motors, synchronised cylinders and systems with the same stroke volume. For example, the protection of snow plough cylinders that are constantly exposed to external forces and loads during operation. Shock valves are positioned as close as possible to the consumer to be protected. Adjustable pressure range: 40 - 210 bar
The valve is used for overpressure or overload protection in 2 pressure lines. It can be used both as a shock valve and as a pressure relief valve for continuous operation. The valve is an ideal protection against sudden pressure surges and enables the setting of different pressures at two inlets of the hydraulic system. The shock valve is used to protect hydraulic motors, synchronised cylinders and systems with the same stroke volume. For example, the protection of snow plough cylinders that are constantly exposed to external forces and loads during operation. Shock valves are positioned as close as possible to the consumer to be protected. Adjustable pressure range: 40 - 210 bar
Width 50 mm, length 10 m.
Content: 10 m (€0.48 / 1 m)
Heat-resistant silicone scraper with stainless steel handle. The plastic button in the handle ensures a secure hold. Dishwasher safe. Dimensions 26.5x5.5 cm
Pastry wheel with plastic handle. Wavy edge for a decorative decoration of your bakeries. Particularly suitable for pasta, sheets or shortcrust pastry. Dishwasher safe.
Equipment:70 pieces of dowels 6 mm80 pieces of dowels 8 mm10 pieces of dowels 10 mm 1 each stone drill: 6.8 and 10 mm
Replacement drawer for the Europa laying nest (middle model, top and bottom). Wooden frame with wire mesh base. Dimensions: (L x W) 89 x 41 cm
PVC suction and pressure hose with hard PVC spiral. The high rigidity (Shore hardness 85) of the hose makes it possible to precisely position the end piece on the drag hose distributor near the ground. This ensures optimal and precise spreading of the manure.
Film-forming care spray for animals to support natural skin regeneration.Promotes the rapid self-healing of superficial injuries and skin lesions - the wounds are covered by a protective film and protected from possible infections. ~Reduces sucking and cannibalism through a natural bitter substance, also ideal for eczema between the legs.Without waiting time! Simply spray onto affected skin areas and repeat several times until healing occurs. ~Care components: resin of the dragon's blood tree, lactic acid, propylene glycol
Content: 0.5 l (€63.90 / 1 l)
Downpipe clamp insulators fit marten kit 131935
Compatible with stainless steel drinking bowlsLister original spare part number 04-0080330
Suitable for Kerbl S522 drinking troughKerbl original spare part number 22524
Suitable for Kerbl K75 and SH30 drinking troughsLister Original spare part number 2220405
Fits Lister SB2, 22, 112, and 113 drinking troughsLister original spare part number 09-0060017
High-quality drain set for incubation trays - precise water level control for optimum incubation conditionsOur specially developed drain set ensures reliable regulation of the desired water level in incubation trays - ideal for successful egg incubation and safe brood rearing.The functional design impresses with hygienic properties and a particularly easy-care, easy-to-clean surface - for maximum cleanliness and minimum cleaning effort.
complete with seal, suitable for fair number 14234
B-grade item, pump is used but fully functional and in good condition.Compact and robust wastewater pump with an oil-filled submersible motor, 0.55 kW/230 volts. Maximum flow rate: 230 L/min, maximum delivery head: 8 m, 5/4" female thread connection.Dimensions: Height only 410 mm, diameter 245 mm.Thanks to its special level controller and compact design, it is ideal for wastewater shafts in confined spaces, e.g., cleaning milking parlors, seepage pits at drive-over silos, etc. Float switch activation range: min. 10 cm, max. 20 cm.
Special submersible pump for pumping dirty water, backwater, groundwater, or construction site water.Thanks to optimized motor cooling, operation is possible even at low water levels (drip operation).However, dry running should be avoided.The pump features a high-quality 1850W/230V motor with a 100% duty cycle, making it suitable for continuous operation.This professional pump can handle particles up to 10mm in size, has a delivery head of up to 7m, and a maximum flow rate of 28,000L/h.A durable housing made of high-quality stainless steel and a float switch are standard features.Hose connection: 1 1/2" female thread.