Products

For optimal application of the dipping agent. No backflow into the application solution possible. High-quality version with 2 hoses.

Thanks to the non-return device, dipping agent that has already been pumped up can no longer flow back into the container and cause contamination. It has an inclined neck device and an innovative splash guard rim with a drain in the overflow chamber. 

Dip es organic is a high-quality organic dip with intensive care substances. It is film-forming, ready to use and offers active protection for the teats. The barrier effect protects the teats against the entry of unwanted germs and improves resistance. The film can be easily removed before milking with an udder cloth with dip solution.Application:Before dipping, pre-clean the teats and udder with a damp cloth. After milking, dip the teats 3 cm deep into the organic dip using the dip cup. Clean the dip cup after use.InfoXgen listed - suitable for organic farms!

Dip es protect is a ready-to-use dip based on lactic acid for safe udder care. It contains high-quality substances such as aloe vera and glycerine. The insulating film adheres long-term and offers additional protection, especially in cold seasons or when drying off. The barrier film also keeps flies away and supports natural resistance.Application:Before dipping, pre-clean the teats and udder with a damp cloth. After milking, dip the teats 3 cm deep into the organic dip using the dip cup. Clean the dip cup after use.

Dirko gray is a high-temperature silicone-based sealant. Dirko HT hardens by reacting with humidity. The hardened sealant exhibits permanently elastic behavior. The product is characterized by a very wide range of applications.Temperature resistant -60 to +315C. Tube 70 ml, nozzles, tube keyHigher tensile strength when cured.

Suitable for all HD pistols with a 12 mm plug-in coupling

With stainless steel pipe, 500 mm with nozzle 042.

This accessory is only suitable for the professional Krnzle plug-in system.(Not suitable for Krnzle hobby devices (not suitable for K1050 series or : 042

An all-rounder for flexible useThe Einhell dirty water pump GC-DP 7035 LL is an all-rounder for drainage around the house and garden. Emptying ponds, pumping out flooded construction sites and cellars as well as draining rain barrels and cisterns are no problem for the all-rounder! ~The 700 watt motor provides the necessary power to pump up to 16,000 liters per hour with a delivery pressure of 0.8 bar from a maximum immersion depth of 7 meters. ~The Einhell dirty water pump GC-DP 7035 LL is an all-rounder when clear or dirty water needs to be pumped out. The 2-in-1 combination pump works with flat suction up to 1 mm residual water level, with dirty water up to 35 mm maximum foreign body size. The pump starts in clear water mode at a water height of 10 mm in continuous operation. The suction level can be adjusted with a simple twist movement. The float switch is infinitely height-adjustable. The high-quality ceramic/rubber mechanical seal ensures a long service life, and the housing is also made of impact-resistant plastic. A cable winding option is integrated into the housing. The ergonomic carrying handle allows for easy transport. A 90 angle G1 (approx. 47.8 mm) male x G1 (approx. 47.8 mm) male, a universal adapter for 25/32 mm hoses and 33.3 mm (G 1) male thread ensure the appropriate connection . ~Technical data:Flat suction up to 1 mmPower 700 WLength of power cable: 10 mMax. Immersion depth: 7 mMax. Foreign body size: 35 mmMax. Delivery pressure: 0.8 barMax. Delivery height: 8 mMax. Flow rate: 16000 l/hMax. Water temperature: 35 CMin. Water level pump start: 10 mm Type pressure connection: 47.8 mm (G11/2 IT)

High-quality dirty water pump with aqua sensor for use in narrow shafts or pits. High quality seal and oil chamber for long service life. Transports dirty water up to 35mm grain diameter. Output: max. 20,000L/h, pressure max. 0.9 bar/9 meter delivery height, motor: 750 watts/230V. Connection via 6/4? female thread or with 5/4, 6/4 or 2? hose.

Compact and robust dirty water pump with oil-filled submersible motor with 0.55 kW/230 volts. Flow rate max. 230 L/min, delivery height max. 8 m, connection 5/4?IG. Dimensions: Height only 410 mm, diameter 245 mm. Thanks to the special level controller and compact design, it is ideal for dirty water shafts where space is limited, e.g. cleaning milking parlors, seepage shafts in driving silos, etc. Switching range of the float switch min. 10 cm, max. 20 cm.

​High-quality submersible pump with a stainless steel housing and a power output of 750 watts / 230 volts.Pumps up to 11,400 L/min and can handle particles up to 30 mm in size. Maximum delivery head: 7.5 m (0.75 bar).Equipped with a float switch and a universal hose adapter.A practical flood control kit for pumping out basements, pools, construction pits, etc.Complete with a 15 m C-shaped flat hose, matching C-coupling for the pump, transport basket (which doubles as a pump housing), and pre-filter.

For tough use, e.g. for floods, seepage shafts or flooded construction pits, secure stability, long mileage. 1300 W, flow rate max. 23,000 l/h, delivery height max. 10 m, immersion depth 5 m, foreign bodies up to 40 mm, connection cable 10 m, float switch, pressure connection G 2" IT, universal connection nozzle 2" AG, 90 angle, double Mechanical seal, cast iron pump wheel.

The Einhell dirty water pump GE-DP 7935 NA ECO with aqua sensor works with Eco-Power and delivers a delivery rate of 19,000 liters per hour at 790 watts, with a maximum delivery height of nine meters. The maximum immersion depth is seven meters. The pump is designed for foreign bodies with a diameter of up to 35 millimeters. This makes the dirty water pump suitable for powerful pumping out of ponds, construction pits, basement rooms or for rainwater use. Thanks to the Aquasensor technology, the pump works with patented sensor settings at three automatic starting heights or can be used in continuous operation. Due to the integrated aqua sensor, the pump has a slim design and can also be used in narrow shafts. A high-quality mechanical seal ensures a long service life. The robust housing is made of impact-resistant plastic with a stainless steel outer skin. The hose connection on the top of the pump is easily accessible. The equipment includes the ergonomic carrying handle, a ten meter power cable and the cable winder as well as an integrated hanging loop. Technical data:Mains connection 230VPower 790WFlow capacity max. 19000l /hDelivery height max 9mImmersion depth max 7mWater temperature max 35CGrain size max 35mmHose connection 6/4" AGPower cable 10m H07RN-F

Robust dirty water pump for emptying garden ponds, cellars, seepage shafts, etc. With the permanently installed float switch, the pump switches on and off automatically. Dirt up to a grain size of 15mm can be vacuumed out. Housing off Stainless steel, with comfortable carrying handles and cable storage.Technical data: Mains connection: 230V 50 Hz Input power: 630 W Max. delivery rate: 17,000 l/h Delivery height max.: 8 m Immersion depth max.: 5 m Water temperature max.: 35C Hose connection: G1 IT Foreign bodies max.: 15 mm Power cable: 10m Switching point ON: approx. 50 cm Switching point OFF: approx. 5 cm Suction height: approx. 40 mm Weight: 5.5 kg

Newly developed submersible pump for clear and dirty water up to grain size 30 mm. Max. delivery rate 7500 l/h, delivery height max. 5 m, motor 450 watts 230 volts. Pressure connection 5/4?IG, complete with float switch and hose connection.

Suitable for Case, Steyr and New Holland Outer diameter: 36mm Attachment diameter: 15mm Inner diameter: 10mm Height: 10mm

Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.

Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.

Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.

Suitable for Tuchel, Stramayr, with driving pin.

Can be used as a side broom on all common sweepers. Sweeping 600 mm, plate 350 mm, center hole 120 mm, hole circle 1 160 mm, hole circle 2 220 mm, 3 holes each with a diameter of 10.5 mm

Can be used as a side broom on all common sweepers. Sweeping 600 mm, plate 350 mm, center hole 120 mm, hole circle 1 160 mm, hole circle 2 220 mm, 3 holes each with a diameter of 10.5 mm

Whether in agriculture, municipal use or on construction sites: when it comes to cleanliness and efficiency, our brush rings are the first choice for your sweeper. Trust in original equipment manufacturer quality that can easily handle even the toughest dirt.Thanks to optimised bristle density and special arrangements, such as the proven Wave-Line wave shape, our disc brushes guarantee streak-free sweeping results and ideal dirt transport.The PP (polypropylene) bristles are the all-rounder for standard cleaning, leaves and up to medium soiling.The high-quality bristle material ensures low wear and a long service life. This significantly reduces your maintenance costs thanks to a long service life!Depending on their dimensions, our brush rings are compatible with all common brush drives and sweeper models and can be changed quickly thanks to precise manufacturing.