Products

Made of spring steel, 5x20 - 25x90 mm.

Compression spring for handbrake lever for Steyr: T180, T80Length: 30mm, diameter: 17mm

Compression spring for starter button for Steyr: T80, T84, T86, T180aItem no. 98

Compression spring suitable for the fastening screws of the swath plate. Length 35mm, outer diameter 28mm, spring thickness 5.8mm

Compression spring suitable for the fastening screws of the swath plate. Length 36mm, outer diameter 20mm, spring thickness 4mm

Compression spring suitable for the fastening screws of the swath plate. Length 47mm, outer diameter 22mm, spring thickness 4mm

Made of spring steel, 5x20 - 25x90 mm.Refill pack in box, 1/2 assortment contents

The compression tester set for petrol engines allows you to easily measure the compression pressure of your petrol engine. The pressure gauge has a measuring range of 0 - 20 bar / 0 - 300 psi. In addition to the compression gauge, you will also receive 4 different spark plug thread adapters and 2 pressure pipes for quick measurements.Scope of delivery:Manometer: 0 - 20 bar / 0 - 300 psiHose length: 45 cmSpark plug adapter: 1 x M10 x 1.01 x M12 x 1.251 x M14 x 1.251 x M18 x 1.5 2 x pressure tube with rubber for quick measurements

Two-cylinder high-performance units made of gray cast iron for a long service life Made of metalStarting capacitor and starting relief valve ensure easy starting on 230 volt modelsTank pressure gauge Made in GermanyFilter pressure regulator with pressure gauge Made in Germany for regulated compressed air that is cleaned of condensate, dirt and oilTen-year guarantee against rust through on powder-coated compressed air tanksIncludes high-quality composite safety coupling and high-quality CONDOR pressure switchLarge ergonomic bow handleStable steering chassis with parking brake in conjunction with large, puncture-proof PU wheels

Maximum, robust equipment and best quality at an affordable priceFully automatic on/off operationWith all safety devicesCompletely ready for connection, quality electric motorQuality electric motor with high starting torque is equipped with a motor protection switchStarting capacitor and starting relief valve ensure easy startingWith phase inverter as standard for easy manual reversal of the direction of rotationCompressed air compression via high-performance HOS unitThe start-up relief valve ensures easy and unpressurized start-upThe two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation and a long service lifeThis ensures an even longer service life due to even less wear and tearHigh-quality compressor with optimum lubrication for a long service life and high reliabilityEquipped with high-quality intake filterThe aftercooler with large cooling fins ensures a low boiler inlet temperature and therefore less moisture in the compressed air, which protects the compressed air toolsAdditionally with intercooler to the aftercoolerCorrosion-free valve plates for improved heat dissipation and compressor longevity The large fan wheel and a cooling air baffle on the cylinder ensure optimum cooling of the compressorA sturdy metal belt guard ensures optimum protection of the components and a high level of user safetyCompressed air supply to the boiler via flexible armored hose line with heat protection prevents vibration breakageHigh-quality drive beltPowerful and economical driveThe toothed drive belt makes starting easier, improves smooth running and power transmission and reduces power consumption by up to 30%Sturdy metal belt guardOperation on the maintenance blockEquipped with a high-quality CONDOR MDR 5 pressure switch with robust push-button function for fully automatic on/off operationFilter pressure regulator for infinitely variable adjustment of the working pressure, with simultaneous dirt, oil and condensation water separationTwo large pressure gauges indicate the tank and working pressureAir tapping at the maintenance block via a convenient safety quick-release couplingOn the maintenance block only fixed screw connections, no hose connectionsTwo compressed air tapping pointsOne compressed air outlet for filtered compressed airOne compressed air extraction point via direct outlet on the boiler with ball valveComfort safety coupling - The advantages.Comfort safety couplings from AIRCRAFT are the first manufacturer to use them as standardTwo separate locking systems for maximum work safetyDangerous whipping of the hose line is preventedComfortable and safe to transport and set upErgonomically extended handle for comfortable transportation in an almost upright position - strain on the back due to lifting is avoidedPuncture-proof PU foam wheels and stable steering chassis with parking brake enable easy transportationThe parking brake prevents both turning and rolling movements of the wheels and ensures that the compressor stands perfectly stillWith practical second transport handle on the tank, which makes it easier to carry the compressorHigh-quality tank with durable rust protectionAIRCRAFT is the first manufacturer to equip the AIRPROFI series compressors with hot-dip galvanized boilers inside and out as standardThe AIRPROFI series boilers therefore come with a 15-year guarantee against rusting through.

Portable oil-free piston craftsman's compressor with a weight of only 9.2kg.Can be used universally in assembly, home and hobby areas with automatic on and off operation.Due to the low Lightweight, easy to carry and easy to use.The integrated electric motor is equipped with a motor protection switch. Compressed air tank with 6 liters powder-coated, with rubber feet or suction cups at the front, power cable 1.8m long.Includes one-hand quick coupling, pressure reducer, automatic pressure switch, and pressure gauge for tank and working pressure.Technical dataCompression system: WDSMaximum flow volume: 180 l/minFilling capacity approx.: 90 l/minMaximum pressure: 8 barContainer capacity: 6 lCylinder/stages: 1/1Speed: 3400 min-1Motor power: 1.1 kWConnection: 230 VWeight: 9.2 kgDimensions ( L x W x H): 315 x 355 x 370 mmSound power level LWA: 97 dB(A)

High-quality 2-cylinder compressor with 235 l/min suction power This high-quality 2-cylinder compressor is the perfect choice for anyone looking for a reliable and powerful compressor for professional or private use. It has a suction capacity of 235 l/min and a maximum pressure of 10 bar, making it suitable for a wide range of applications, e.g. E.g. painting, welding, drilling, screwing and much more. The compressor has a capacity of 50 liters and a motor with an output of 1.5 kW/2.0 HP. It is ready for immediate use and comes with a pressure switch and a pressure reducer. Advantages: High-quality workmanship, powerful motor, large suction power, high pressure, large capacity, ready for immediate use, with pressure switch and pressure reducer, scope of delivery: compressor, pressure switch, pressure reducer, 2 hoses, 2 attachments, operating instructions. 

Compact compressor with belt drive (low-speed) and two cylinder high-performance unit made of gray cast iron for a long service life and value-saving use. ~Optimal cooling of the compressor thanks to the large fan wheel and cooling air baffle on the cylinder.Quality electric motor with motor protection switch and high tightening torque . Cooling fins on the aftercooler guarantee a low inlet temperature into the container and thus ensure less moisture in the compressed air.With metal belt protection grille, safety valve, condensate drain valve, pressure gauge and all safety devices. Delivery completely ready for connection. Additional equipment:Pressure reducer for continuous adjustment of the working pressure, a pressure gauge each for displaying the container and working pressure, simple one-hand clutch, automatic pressure switch. Plastic wheels at the back, rubber suction feet at the front.Technical data:Compressor system: HOSMaximum volume flow: 365l/min< li>Filling capacity approx.: 270l/minMaximum pressure: 10barContainer capacity: 50lCylinder / stages: 2/1 Motor power: 2.2kWSpeed: 1375 /minVoltage: 400VFrequency: 50HzWeight: 57.5kg< /li>Dimensions (lxwxh): 870 x 400 x 700mm

Mobile piston compressor with belt driveTwo-cylinder high-performance units made of gray cast iron for a long service lifeLarge fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressorQuality electric motor with high tightening torqueElectric motor equipped with motor protection switchAftercooler with cooling fins ensures a low container inlet temperature and thus less moisture in the compressed airStable belt grid protection made of metalStarting capacitor and starting relief valve ensure easy starting on 230 volt models400 volt models as standard with phase inverter for easy manual reversal of the direction of rotationCompressed air tank equipped with safety valve, tank pressure gauge and condensate drain valveInclusive of all safety devicesCompletely ready for connectionFilter pressure regulator with a pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for container pressureTen-year guarantee against rust through on powder-coated compressed air tanksIncludes high-quality composite safety coupling and high-quality CONDOR pressure switchFlexible armored hose line with heat protection for a long service life without vibration breakage< li>Ergonomic handle, rubber handle and transport handle on the compressed air tank for comfortable transportStable steering chassis with parking brake in conjunction with large, puncture-proof wheels for comfortable transportThanks to the two-stage compression 2-cylinder -High-performance unit with very low speed, a particularly quiet and low-vibration operation is achievedThis ensures a longer service life due to less wear In addition with an intercooler for the aftercooler Compressor system : HOS Suction capacity approx.: 650l/minFilling capacity approx.: 520l/min Explanation of filling capacity at: 6 bar working pressureNumber of cylinders: 2 Number of compression stages: 2Compressor speed: 950min Compressed air tankMaximum pressure: 10bar Tank capacity: 100l

​Compact compressor with a 2-cylinder, 2-stage high-performance unit with approximately 620 L/min suction capacity and a filling capacity of 520 L/min (at 6 bar).Also suitable for demanding DL tools.Electric motor with 4.8 kW/6.5 HP at 400 volts. Slow compressor speed of only 950 rpm for quiet operation and a long service life.The compact 90 mm reservoir and high-quality chassis also make it suitable for mobile use.Very powerful compressor with high-quality CONDOR pressure switch and composite safety clutch at a special price.

Battioni &~ Pagani. ~

Transportable compressor for quick on-site use. Weight only 5.9 kg, thanks to 2 cylinders max. 150 L/min air output. Maximum pressure 8 bar, power consumption max. 45 A. Complete with 2.4 m connection cable including battery terminals, pressure hose with pressure gauge and practical transport bag.

​DIY compressor with a single-cylinder unit and oil lubrication system for a long service life.With an intake capacity of approximately 300 L/min and a 50 L reservoir, it is also suitable for temporary increases in air demand.Motor with 2.0 kW/2.75 HP at 2800 rpm and 230 volts.Compact design with large wheels for easy transport and stability.Fully equipped with a pressure switch, pressure reducer, and reservoir and working pressure gauges.Dimensions: 800 x 360 x 750 mm (L x W x H).Weight: approximately 35 kg.Durable DIY compressor with an optimal price/performance ratio.

Can be used for any compressor.

Very handy and universally applicable compressor with a maximum of 11 bar. Ideal for filling car tires, balls, wheelbarrows, etc. But thanks to the adjustable pressure it can also be used for air mattresses, beach balls and the like. Thanks to the innovative hybrid technology, the compressor can be used anywhere with both electricity and a battery (optional). Complete with low-pressure universal nozzle and HP hose with 3-piece filling nipple assortment.Technical data:Suction power max. 21 L/minMax. Operating pressure: 11 barWeight: only 2.63 kgDimensions: approx. 30x19x22cm

Very handy and universally applicable compressor with a maximum of 11 bar. Ideal for filling car tires, balls, wheelbarrows, etc. But thanks to the adjustable pressure it can also be used for air mattresses, beach balls and the like. Thanks to the innovative hybrid technology, the compressor can be used anywhere with both electricity and a battery.Now as a promotional set with a 18V/4.0 Ah battery and charger, also suitable for all Einhell Power X-Change battery-powered machines .Technical data: Suction capacity max. 21 l/min Max. operating pressure: 11 bar Weight: only 2.63 kg Dimensions: approx. 30x19x22cm

​Piston compressor with oil-lubricated 1-cylinder unit and powerful 1.8 KW 2.45 HP 230 volt motor. The compressor has a maximum intake capacity of 260 l/min and a maximum pressure of 10 bar. The 50 l tank makes it easy to compensate for short-term peaks in demand. The compressor is supplied complete with pressure switch, pressure reducer and a 12-piece DL tool set incl. 5 m hose, blow-out gun, tire inflator and 8-fold adapter set.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 320 L/min, speed 1420 rpm, required. Motor power 1.8 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.5 L.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 365 L/min, speed 1370 rpm, required. Motor power 2.2 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.75 L.