Products

​DIY compressor with a single-cylinder unit and oil lubrication system for a long service life.With an intake capacity of approximately 300 L/min and a 50 L reservoir, it is also suitable for temporary increases in air demand.Motor with 2.0 kW/2.75 HP at 2800 rpm and 230 volts.Compact design with large wheels for easy transport and stability.Fully equipped with a pressure switch, pressure reducer, and reservoir and working pressure gauges.Dimensions: 800 x 360 x 750 mm (L x W x H).Weight: approximately 35 kg.Durable DIY compressor with an optimal price/performance ratio.

Can be used for any compressor.

Very handy and universally applicable compressor with a maximum of 11 bar. Ideal for filling car tires, balls, wheelbarrows, etc. But thanks to the adjustable pressure it can also be used for air mattresses, beach balls and the like. Thanks to the innovative hybrid technology, the compressor can be used anywhere with both electricity and a battery (optional). Complete with low-pressure universal nozzle and HP hose with 3-piece filling nipple assortment.Technical data:Suction power max. 21 L/minMax. Operating pressure: 11 barWeight: only 2.63 kgDimensions: approx. 30x19x22cm

Very handy and universally applicable compressor with a maximum of 11 bar. Ideal for filling car tires, balls, wheelbarrows, etc. But thanks to the adjustable pressure it can also be used for air mattresses, beach balls and the like. Thanks to the innovative hybrid technology, the compressor can be used anywhere with both electricity and a battery.Now as a promotional set with a 18V/4.0 Ah battery and charger, also suitable for all Einhell Power X-Change battery-powered machines .Technical data: Suction capacity max. 21 l/min Max. operating pressure: 11 bar Weight: only 2.63 kg Dimensions: approx. 30x19x22cm

​Piston compressor with oil-lubricated 1-cylinder unit and powerful 1.8 KW 2.45 HP 230 volt motor. The compressor has a maximum intake capacity of 260 l/min and a maximum pressure of 10 bar. The 50 l tank makes it easy to compensate for short-term peaks in demand. The compressor is supplied complete with pressure switch, pressure reducer and a 12-piece DL tool set incl. 5 m hose, blow-out gun, tire inflator and 8-fold adapter set.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 320 L/min, speed 1420 rpm, required. Motor power 1.8 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.5 L.

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 365 L/min, speed 1370 rpm, required. Motor power 2.2 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.75 L.

For the exact allocation of special feed for horses. WxHxD: 31x39x28 cm.

Versatile machine, e.g. for fattening bulls or raising calves. The partition allows two animals to eat at the same time and undisturbed. Hygienic because the shape allows the animals to completely empty the trough. Easy to assemble - also due to its low weight. The amount of food is adjusted using a slider inside the container. WxHxD: 75 x 80 x 38.5 cm

​Concentrator – Grinding & Separating to Perfection.The all-in-one solution for protein extraction and grain processing.Refine your raw materials: The concentrator efficiently grinds and separates hulls from proteins (from press cake) or processes grain into premium flour, semolina, and grits.Your advantages:Dual-purpose: Specialist for protein extraction (hemp, flax, nuts, etc.) and professional flour production (grains, pseudocereals, legumes).Maximum control: Integrated ammeter for precise monitoring of the grinding load.Plug & Play: Ready to plug in and ready for immediate use with a 230V connection.Robust: Industrial quality with integrated motor protection and emergency stop.Technical data & scope of delivery:Power: 2.2 kW (230V, single-phase).Input: Crushed press cake (< 10 mm²) or whole grainsIncludes: Adjustable feet, ammeter, power cord.Optional equipment available upon request:Various sieves, mobile base, or bridge breaker/agitator for difficult materials. Get the most out of your raw materials – efficiently, versatilely, and powerfully.

pieces 4 to 12 mm, in sheet steel cassette, professional quality, for stone, concrete and masonry

Innovative Schraublösung mit selbstschneidendem Gewinde für sicheren Halt in Beton. Einfach mit Bohrhammer oder dgl. Loch vorbohren und den Schrauben direkt ohne Dübel einschrauben. Einfaches entfernen nach Bedarf mit Knarre, Schlüssel oder Schlagschrauber. Bohrlochdurchmesser bis 6 mm jeweils -1 mm, 8-12 jeweils -2 mm.

Switch-off pressure adjustable from 3 to 11 bar. 4 connections 1/4". With relief valve. For 400 volts

Blank, black unprocessed

Conical sleeve for motor shaft for Elecrem milk centrifuge EM2/EM3, length: 47 mm

Cone nut with thread M16x1.5 for measuring head with serrated holder for Aebi, BCS and Reform.

Cone spigot suitable for Aebi cutterhead with clamping claw and for the cutterhead for ESM municipal and universal beams. The spigot has an M10 internal thread and the cone has a diameter of 16 - 18 mm.

Suitable for countersunk head screw M12x25, Faie No. 43475. Can be used on drum mowers from Claas, Deutz-Fahr, Fella, Kuhn and Pttinger.

Conical screw M8x1x19 with wrench size 14mm. Suitable for Aebi, BCS and Reform.

Tapered screw M8x1x21 with wrench size 13mm. Suitable for Aebi, BCS and Reform.

This conical fermentation tank made of stainless steel with a 60° cone supports the sedimentation and separation of yeast from beer. The adjustable pressure valve up to 2.5 bar enables pressure control during fermentation. The total outlet and middle outlet in DN40 provide options for draining and filling, while the analog thermometer, sampling tap and spray head support process monitoring, sampling and cleaning. Advantages & Functions • 60° cone supports yeast sedimentation • Pressure valve adjustable up to 2.5 bar • Spray head with DN25 cleaning tube Frequently Asked Questions What is the conical fermentation tank suitable for? The fermentation tank is suitable for beer fermentation and supports yeast separation through the 60° cone. Which outlets and taps are included? The tank has a DN40 total outlet, a DN40 middle outlet and a DN15 sampling tap. How is the fermentation process monitored? An analog thermometer is used to monitor the fermentation temperature, while the adjustable pressure valve enables pressure control up to 2.5 bar.

This conical fermentation tank made of AISI 304 stainless steel is suitable for fermenting beer and other liquids containing sediment. The 60° conical bottom supports the settling of yeast and sediment. Three welded feet provide a stable stand, while the ball valves enable draining and the lid provides closure. Advantages & Functions • 60° conical bottom for settling sediment • AISI 304 stainless steel for fermentation applications • Ball valves for draining and filling Frequently Asked Questions What is the fermentation tank suitable for? It is suitable for fermenting beer and liquids containing sediment. Which taps are included? The tank has a 1-inch stainless steel ball valve and an additional ½-inch stainless steel tap. What does the lid include? The lid has a food-safe rubber gasket and a plastic fitting for a fermentation airlock.

This conical filter bag with hanging loops is designed for filtering liquids and solid particles during the processing of wine, must, mash and similar media. The washable material allows repeated use and supports an economical filtration process. The filter bag is available in 5 litre, 10 litre and 20 litre sizes. Advantages & Functions • Conical shape for consistent liquid flow during filtration • Hanging loops for easy attachment to containers or frames • Washable and reusable for long-term use Frequently Asked Questions What applications is the filter bag suitable for? The filter bag is suitable for filtering wine, must, mash and other liquids containing solid particles. What sizes are available? The filter bag is available in 5 litre, 10 litre and 20 litre sizes.