Wet & Combination Grinders

Universal sanding machine with 150 mm diameter disc sander and tiltable support table. Easy sheet replacement thanks to Velcro fastener. Belt sander with 0-90° swivel arm, sanding belt size 915 x 100 mm, working area approx. 190 x 125 mm. Technical data: Motor 350W/230V, 1450rpm (grinding disc), belt speed 292m/min, dimensions: 520x370x320mm, net weight 12.5kg. Scope of delivery: Machine incl. variable cross stop and support table as well as 1 sanding belt and 1 hook-and-loop sanding disc K80 each.

Schleifbandset passend für Band/Tellerschleifer GBTS 400.

The original ! Tormek wet grinder in commercial design. High-quality wet grindstone and leather honing wheel for optimum sharpening of your tools. The Tormek T-8 Original is a powerful, versatile water-cooled grinding system that contains everything you need for professional grinding. The advanced design and ease of use provide you with the best conditions for successful sharpening with top results. The Tormek T-8 Original is the right choice for both quality-oriented, passionate craftsmen and true professionals.230 volt / 200 watt industrial motor also suitable for continuous operation. Extensive basic equipment with standard device for straight cutting edges, angle gauge, honing paste, stone preparer. Device for straight cutting edges SE-77 for sharpening chisels and plane ironsTT-50 turning and dressing tool, keeps your stone round and flatStone preparer SP-650 for changing the grain size of your grinding stoneAngle gauge WM-200 for measuring the cutting edge anglePA-70 honing paste for the leather honing wheelEM-15 edge marker for coloring the bevel when setting the cutting edge angleTormek manual for grinding Technical data:Width: 270 mmDepth: 270 mmHeight: 330 mmWeight: 14.8 kgCable length: 1.7 mHousing made of die-cast zinc, powder-coated and robust ABS plasticColor: blue/greyMain axle: MSK-250 stainless steel shaft with EzyLockUnique drive system with RKX18 rubber - self-adjusting under loadMotor:Industrial motor, single-phase, alternating current200 W (input), 230 V, 50 Hz/115 V, 60 HzContinuous operationMaintenance-freeQuiet running, 54 dB25,000 operating hoursTorque 14.7 Nm100 rpmGrinding wheel:SG-250 Original grinding stoneAluminum oxideØ 250 × 50 mmHoning wheel:LA-220 Leather honing wheelCowhide from Tärnsjö Garveri, ABS plastic.Ø 220 × 31 mm

​For sharpening knives and many tools Extensive range of accessories makes it easier to use the right sharpening technique - even for beginnersLong-lasting sharpening without loss of tool hardness due to heat build-up during the sharpening process thanks to low speed and cooling water bathMany holding devices available for different toolsPowerful induction motor for quiet and low-vibration workSpecial corundum grinding stone for perfect grinding results even on hard steel over 60 HRC (tool steel)Removable leather honing wheel for removing burrs after sharpeningStripping paste for polishing the workpiece after grindingAngle gauge for setting the correct grinding angleSplash-proof motor and switch Technical data Grinding stone diameter: 200mm Grinding stone width: 40mmHoning wheel diameter: 200mm Honing wheel width: 30mmDimensions and weights:Length: approx. 680mm Width/depth: approx. 340mmHeight: approx. 375mm Weight: approx. 9.2kgElectrical dataInput power0,15kW Supply voltage230VMotor speed: 1790min¯¹

​Grinding machine with a 250 mm x 50 mm wet grinding stone made of high-grade corundum for sharpening knives, chisels, tools, etc. Due to the low speed of only 90 - 160 rpm (infinitely adjustable) and the water bathand the water bath, low heat build-up and therefore no loss of hardness of the workpiece.The 200 x 30 mm leather honing wheel gives you a perfect edge on every knife.Technical data: Motor 150 Watt / 230 Volt                           Dimensions: 460 x 410 x 340 mm, weight 14.5 kg                           Speed: infinitely variable 90 - 160 rpmSupplied complete with wet and honing wheel, angle gauge, universal sharpening device and honing paste.

The Tormek T-4 is a further development of the T-3 model which brings precision and stability to a completely new level. The vertical and horizontal holders for the universal support and the integrated carrying handle are made in a single piece from cast zinc. The motor and main shaft are mounted on the cast upper part and therefore form a solid unit. This solid construction significantly improved the accuracy when sharpening.Technical data:Solid zinc upper part including universal support with fine adjustment (can be used horizontally and vertically)Impact-resistant ABS plastic housing .Included:Stone preparer (SP-650)Angle gauge (WM-200)Stripping paste (PA-70 )Manual (HB-10)Instruction video (DVD-1)Dimensions: Width 230mm, depth 200mm, Height 260mmWeight: 8.00kgWhetstone: Tormek original whetstone aluminum oxide ~ DM 200x40mm 120rpm Torque 8.4NmLeather honing disc:DM 145x26mmMain shaft: Made of stainless steel, Ezylock in composite.Housing: Impact-resistant ABS plastic, solid zinc topMotor: Single-phase industrial motor 120Watt (recording) 230V, 50Hz, operation 30min/h, maintenance-free, quiet running, 52dB, 10,000 hour service life !