Drill Sets

-14 %

#FA129139

Milwaukee Drill cassette SDS+MX4 7-piece

With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm

€57.95* €67.50* (14.15% saved)

-23 %

#FA129102

Milwaukee HSS-G 25-piece drill bit cassette Thunderweb

THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.

€99.95* €129.90* (23.06% saved)

#FA42934

Auger drill set, 6 pieces.

Wood drill bits in sizes 10, 12, 14, 16, 18, 20 mm. Length 450 mm in a wooden cassette.

€69.50*

-20 %

#FA132447

Milwaukee Chisel/drill bit set SDS Plus 5-piece

Practical starter set for any SDS Plus rotary hammer.Contents: One each of a pointed and flat chisel (200 mm long), and one each of high-quality SDS Plus drill bits (6 x 160 mm, 8 x 160 mm, and 10 x 160 mm).

€39.99* €49.95* (19.94% saved)

#FA5397

Concrete drill set

pieces 4 to 12 mm, in sheet steel cassette, professional quality, for stone, concrete and masonry

€23.95*

#FA113382

Ruko Drill - cassette HSS-G 170 pieces

Ground HSS twist drills with high cutting performance and long service life. Contents: yes10 pieces 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5 and 8mm as well as 5 pieces each 8.5/ 9/ 9.5/ and 10mm

€139.95*

#FA131015

Milwaukee Drill bit cassette SDS+10 pcs MX4 hammer drill bits

Professional SDS-Plus 4-cutter drill bit for hard or reinforced concrete.Contents: 5/6/6 x 115 mm, 6/6/8/8/8/10/12 x 165 mm in a PACKOUT-compatible cartridge.

€89.50*

NEU

#FA134368

Tecwerk Drill bit set 1 - 13 m CO tip with cross-grind

Professional HSS twist drill bits with a special drill tip for precise centering without pre-drilling, even on rounded surfaces – very fast and smooth drilling.Tin-coated tip for extra-long service life and excellent drilling performance in steels up to 1,000 N/mm².25 drill bits with a 0.5 mm pitch and a 3-flat shank to prevent slippage in the chuck (4.0 mm and larger).Supplied in an impact-resistant plastic case.The innovation for effortless, precise, and fast drilling.

€199.90*

#FA104418

Drill cassette Alpen 1-10 Pro

Professional HSS twist drill in a ground design for a long service life and optimal drilling performance. Metal cassette equipped with drill bits from 1.0 - 10.0mm with a pitch of 0.5mm.

€64.50*

#FA104421

Drill cassette Alpen 1-10mm HSS-Cobalt

High-quality HSS cobalt drill bits for use when drilling high-quality steels up to a strength of 800N/mm2, e.g. stainless steel. Metal cassette from 1.0 to 10.0mm, pitch 0.5mm.

€119.95*

#FA104422

Drill cassette Alpen 1-13mm Cobalt

High quality HSS cobalt drill bits for use in high quality steel such as stainless steel. Metal cassette with drill 1.0-13.0mm in 0.5mm pitch

€169.90*

#FA104419

Drill cassette Alpen 1-13mm professional

Professional HSS twist drill in ground design for a long service life and optimal drilling results. Metal cassette with drill 1.0 - 13.0mm in 0.5mm pitch.

€129.90*

#FA104416

Drill cassette Alps 1-10 KM19

High-quality HSS drill set for universal use in alloyed and unalloyed steel. Sizes 1.0 - 10.0mm in 0.5mm pitch.

€37.95*

#FA104417

Drill cassette Alps 1-13 KM 25

High-quality HSS drill bits from 1.0-13mm with a pitch of 0.5mm for universal use in machining alloyed and unalloyed steel.

€79.90*

#FA113778

Ruko Drill cassette HSS - Co 1 - 13mm 25pcs

Industrial HSS-Cobalt twist drill for machining alloyed and unalloyed steel as well as rust- and acid-resistant steels. Increasing in 0.5mm increments from 1.0 to 13.0mm. In metal cassette

€79.95*

#FA113776

Ruko Drill cassette HSS - R 1-10mm 19 pcs

Terrax drill cassette with rolled HSS twist drills in 0.5mm increments from 1.00 - 10.00mm. Stored in a sturdy metal cassette.

€13.95*

#FA52943

Metabo Drill cassette HSS-Co, 19 pieces.

HSS Co drill, ground, cylindrical with 135 cross ground, bronze surface in a practical metal cassette. Suitable for drilling in steel, stainless steel, cast steel, non-ferrous metals, plastics and special alloys. Up to 1100 N/mm tensile strength. Contents: 1-10 x 0.5 mm

€47.90*

#52919

Metabo Drill cassette HSS-G

Contents: 25-teilig | Size: 1-13 mm

Practical range of drill bits, equipped with drill bits in HSS-G quality. Ground design, cylindrical with 135 cross grinding and bright surface. Ideal for drilling in steel and cast steel, alloyed and unalloyed, gray cast iron, malleable cast iron, nodular cast iron, sintered iron, nickel silver, graphite, non-ferrous metals and plastics.Delivered in a robust metal cassette.in 0.5mm increments< /li>

Variants from €24.95*

€59.90*

#FA113777

Ruko Drill cassette HSS-R 1 - 13mm 25 pieces

High-quality twist drills in 0.5mm increments from 1.0mm - 13.0mm increasing. Stored in a sturdy sheet steel cassette.

€24.90*

#FA2256

Drill cassette HSS4241, 170 pieces.

Roll-rolled HSS twist drills 4241 in a practical metal cassette. Contents: 10 pieces each 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 and 8 mm. 5 pieces each 8.5 / 9 / 9.5 and 10 mm.

€69.95*

-28 %

#FA52981

Metabo Drill cassette SDS-Plus 4 pieces

SDS-Plus drill with high-quality carbide drill tip and dynamic, chisel-shaped drill head.Large-volume S-spiral geometry for fast drilling material transport.Good drilling performance with good service life. For use in concrete, masonry, natural stone, Contents: 5, 6, 8, 10mm, each 160mm long

€12.99* €17.95* (27.63% saved)

#FA74525

Tecwerk Flat countersink set M3-M10 medium

HSSDIN 373mit 3 Schneidenspiralgenutetmit festem Führungszapfenmit ZylinderschaftInhalt: 6-teiligGewinde: M3-M10

€124.95*

NEU

#FA134484

Ruko HSS-Co drill bit set 1 - 10 mm with FLOWSTEP tip

The revolution for fast and precise drilling in wood, plastic, aluminum, non-ferrous metals, structural steels, and V2A/V4A stainless steel.Thanks to the FLOWSTEP tip, center punching is no longer necessary, even on rounded surfaces (pipes).The drill bit cuts the material itself, making even larger diameters possible without pre-drilling.The break-resistant plastic case contains 19 high-quality HSS-Co5 drill bits from 1.0 to 10.0 mm with a 0.5 mm pitch.All drill bits 3.5 mm and larger feature a triple-flat shank that reliably prevents slippage in the chuck.These drill bits guarantee fast, precise drilling and an extremely long service life, even with hard materials such as tool steels or stainless steels.

€149.90*

NEU

#FA134485

Ruko HSS-Co5 drill bit set, 1-13 mm, with FLOWSTEP tip

The revolution for fast and precise drilling in wood, plastic, aluminum, non-ferrous metals, structural steels, and V2A/V4A stainless steel.Thanks to the FLOWSTEP tip, center punching is no longer necessary, even on rounded surfaces (pipes).The drill bit cuts the material itself, making even larger diameters possible without pre-drilling.The break-resistant plastic case contains 19 high-quality HSS-Co5 drill bits from 1.0 to 13.0 mm with a 0.5 mm pitch.All drill bits 3.5 mm and larger feature a triple-flat shank that reliably prevents slippage in the chuck.These drill bits guarantee fast, precise drilling and an extremely long service life, even with hard materials such as tool steels or stainless steels.

€239.90*

Seite 1 von 2

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.