Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
All Products
C70 steel, CV steel Cylindrical shaft with continuous back milling, centering point and pre-cutters Other technical properties Material: CV steel Total length: 61mm
Sturdy workbench with a solid beechwood worktop, 40 mm thick.Features height-adjustable workbench legs and two 90% extension drawers, each 180 mm high and with a 100 kg load capacity.Dimensions: 2000 x 700 x 790-1140 mm (W x D x H).Load capacity up to 750 kg.Delivered unassembled; on-site assembly takes only a few minutes.A robust workbench for heavy-duty use.
Workbench with solid beech wood top (thickness 40mm) and cover veneer on both sides. Complete, consisting of: 2 height-adjustable workbench feet, 1 worktop (load capacity 750kg). Robust and durable commercial design!Technical data:Worktop: beech 40 mmWidth: 1500 mmFrame: light gray, RAL7035Height: 790-1140 mm Depth: 700 mmLoad capacity: 750 kg
Heavy industrial design with brass jaws and band.
High clamping force, jaws with plastic protective caps
Comfortable couchette with 6 wheels. Total height only 13cm, lying area 82x28cm. The foldable design requires little space. Dimensions folded: 45x43x15cm. Promotional model only available for a short time.
This workshop crane is ideal for (dis)assembling engine blocks, but is also often used for lifting and moving other heavy objects. The crane's arm can be locked in four different positions: 250kg, 500kg, 750kg and 1000kg. The locking pin has a practical handle. The lift is equipped with a rotary knob for lowering the arm, which ensures ease of use and additional safety. The crane is also foldable and therefore easy to store. Technical data: Dimensions in use: 1540x1040x1400mm LxWxH. Folded footprint: approx. 49x46cm. Max. lifting height: 1,000kg (length 1080mm) = 1920mm, 750kg (length 1170mm) = 1990mm, 500kg (length 1260mm) = 2050mm, 250gk (length 1350mm) = 2120mm Distance between the wheels: 940mm Dead weight: 66kg
High-quality workshop crane with a sensational price-performance ratio.Lifting capacity up to 1 ton or 250 kg with a short or long lifting arm.Thanks to the foldable outriggers and casters, it requires minimal storage space and is easy to transport to the work site.
Practical workshop press with 20 T pressure force. Ideal for universal use such as pressing in shafts, pressing out bearings, bending pipes and shafts and much more. The press has a welded solid frame and 2 press blocks with V-support. Thanks to the large pressure gauge, the pressing pressure can be easily read at any time. The 2-stage hydraulic unit enables a large stroke and therefore quick work at low pressure as well as a small stroke at high pressure for precise work. Technical data: Dimensions: 1830 (incl. pressure gauge/1602 without) x 850x 540mm ~ HxWxD, passage: 540mm, support depth: 134mm, cylinder stroke: 180mm, dead weight: 100 kg
The WPP 30 EF is a robust press with conventional equipment. It has a maximum pressure force of 30 tons and is ideal for use in workshops, industry and agriculture. The press is easy to use and has a number of safety features. It is also equipped with a pressure gauge so that the pressure can be checked at any time. The WPP 30 EF is a reliable and versatile press suitable for a wide range of applications.Here are some of the advantages of the WPP 30 EF:Maximum pressure force of 30 tonsRobust constructionEasy to useEquipped with safety functionsEquipped with pressure gaugeVersatile in use The WPP 30 EF is an ideal press for anyone looking for a reliable and versatile machine for use in workshops, industry and agriculture.General informationPress force: 30t, piston stroke: 150mmPiston travel: 200mm Dimensions and weightsLength: ~ approx. 795mm, Width/Depth: approx. 700mm Height: approx.1830mm, weight: ~ approx. 167kg Clear width: 535mm, installation height max.: 1031mm Installation height min.: 151mm
Robust workshop press in high quality Made in Italy. Thanks to the laterally movable cylinder with 20 T pressure force, the press can be used very universally. This workshop press has hand and combined foot operation. This equipment makes precise (pressing in) work much easier for you. The delivery comes complete with pressure gauge, hand/foot lever and 2 pieces of prism support.Technical data:Pressure force: 20 TPassage light: 580mmPassage width: 125mmCylinder stroke: 150mmDead weight : 130 kgDimensions: 1870x920x500mm HxWxD
The workshop trolley is delivered completely pre-assembled and with three equipped drawers. Unpack done! So that ~ It is ready for immediate use.With the help of the ergonomic push handles integrated into the plastic shelf, it can be easily maneuvered through the workshop and the edge protection on the corners protects in the event of collisions. ~Thanks to its 2 parking brakes on the With swivel castors, it stays safely at its destination.The professional workshop trolley is high-quality powder-coated and has seven drawers. Two drawers are particularly high and therefore offer enough space for drills and other large tools. The side keyholes allow additional storage space to be created with the right holders. Maximum 100% extendable. ~So that your professional workshop trolley does not tip over, all drawers are individually locked and can still be secured by the central lock.. ~The professional workshop trolley in detail: ~ Total dimensions: W 77 x H 97.5 x D 47 cmInside drawer dimensions: 5x 52.8 cm x 39.8 cm x 55 mm2x 52.8 x 39.8 x 13.5 cmTotal load capacity : 400 kgLoad capacity per drawer: 35 kgFull extension: ~ YesBall bearings: YesLocking: single, centrally lockable: sideways, 2 keysEdge protection: plasticRollers: 2 swivel castors, 2 fixed castorsDrawer 1: ~Socket wrench, 170 pieces: with 6.3 mm (1/4") drive: 1 hexagonal socket each 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 , 14 mm - 1 hexagon socket each, extra long 4, 5, 6, 7, 8, 9, 10 mm - 1 Torx E socket each E4, E5, E6, E7, E8 - 1 bit socket each, T-profile T8, T9, T10, T15, T20, T25, T27, T30 - 1 bit socket each, T-profile with face hole TB8, TB9, TB10, TB15, TB20, TB25, TB27, TB30 - 1 bit each Socket, Pozidriv PZ0, PZ1, PZ2 - 1 bit socket each, hexagon socket 3, 4, 5, 6 mm - 1 bit socket each, slot 4, 5.5, 6.5, 7 mm - 1 bit socket each, cross PH0, PH1, PH2 - 1 extension each in 50 and 10 cm - 1 cardan joint - 1 rotary handle 15 cm - 1 1/4" reversible ratchet 14.5 cm, 72 teeth fine-toothed - 1 sliding handle 11 cm with 10 mm (3/8") drive :-1 each hexagon socket 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm-1 each hexagon socket, extra long 10, 11, 12, 13, 14, 15 mm-each 1 Torx E socket E10, E11, E12, E14, E16, E18-1 extension 12.5 cm-1 3/8" reversible ratchet 20.5 cm, 72 teeth fine-toothed-1 spark plug socket 18 mm-1 adapter for 8 mm bits - 1 cardan joint with 12.5 mm (1/2") drive: - 1 hexagon socket each 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 , 24, 27, 30, 32 mm - 1 hexagon socket each, extra long 16, 17, 18, 19, 22 mm - 1 Torx E socket each E20, E24 - 1 spark plug socket each 16, 21 mm - 1 rotary handle 25 cm-1 extension 12.5 cm-1 1/2" reversible ratchet 25 cm, 72 teeth fine-toothed-1 cardan joint-1 adapter for 8 mm bits-bits in 8 mm drive x 30 mm length:-1 bit each , Torx with face hole TB40, TB45, TB50, TB55, TB60, TB70 - 1 bit each, Torx T40, T45, T50, T55, T60, T70 - 1 bit each, hexagon socket 7, 8, 10, 12, 14 mm - each 1 bit, cross PH3, PH4 - 1 bit each, slot 8, 10, 12 mm - 1 bit each, Pozidriv PZ3, PZ4 - 1 Allen key 1.27, 1.5, 2, 2.5, 3, 4, 5 mm bits in 6 .3 mm (1/4") drive x 25 mm length: - 1 bit each, multi-tooth M5, M6, M8 - 1 bit each, T-profile T5, T6, T7 - 1 bit each, RIBE profile M5, M6 , M7, M8, M9-1 bit each, five-star TS10, 15, 20, 25, 27, 30, 40, 45-1 bit, T-profile with face hole TB7Drawer 2: ~Wrenches, 24 pieces:-16 combination wrenches: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm-8 ring wrenches offset: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 mmDrawer 3: ~Pliers and screwdrivers, 13 pieces:-5 screwdrivers, slot: 2.0x63 mm, 3.0x80 mm, 4.0x10 cm, 5.5x12.5 cm, 6.5x15 cm-3 screwdrivers, Philips: PH0x75 mm, PH1x80 mm, PH2x10 cm, PH3x15 cm-1 professional combination pliers: 18 cm-1 professional side cutters: 18 cm-1 professional telephone pliers, straight: 20 cm-1 professional water pump pliers: 25 cm ~
Practical assembly trolley with padded lying surface 1030x415x160 mm. Easy rolling thanks to 6 wheels. With one move, the couchette becomes a practical work stool. Weight only 11.8 kg.
A practical helper for wire fence assembly for connecting fences, breeding cages and wire mesh nettingAlso suitable for upholstery on car seats, sofas or mattresseswith automatic and spring-loaded feed system for easy handlingplier magazine for up to 50 C-shape wire ringsnon-slip 2-component handlerobust and reliable2 magazines C-shape wire rings (100 pcs.)Material: sheet steel (cold-rolled)Ring material: iron wireRing size: 11/16"
400 ml spray can, abrasion-resistant and very economical, can be painted over dries quickly and produces a matt silver layer temperature-resistant: up to approx. +250 C zinc particles with 98% metallic purity, combined with pure powder aluminum ideal for touching up hot-dip galvanized surfaces particularly recommended in the areas of metal construction, welding technology, vehicle maintenance silicone-free Other technical properties Contents: 400ml Container: spray can.
Content: 0.4 l (€17.90 / 1 l)
Spray onto a clean, grease-free surface and allow to dry for approx. 20 minutes Economy set with 6 x 400 ml spray cans.For repairing damaged zinc coatingsFor coating drilling and welding pointsFast dryingAbrasion-resistantElectrically conductiveCan be painted over Temperature-resistant: up to +450 °C Zinc particles with 98 % metallic purity
Spray can 400ml, quick-drying anti-corrosion agent for coating and cold galvanizing metal as well as for repairing damaged zinc surfaces can be painted over dries quickly and produces a bright, matt silver layer abrasion-resistant and very economical temperature-resistant: up to +250 C zinc particles with 98% metallic purity dispersed in fast-volatile solvents spray onto a grease-free, clean surface and allow to dry for approx. 20 minutes particularly recommended for the areas of metal construction, welding, vehicle maintenance silicone-free ~Other technical properties ~Colour: white aluminum Container: spray can.
Content: 0.4 l (€19.97 / 1 l)
excellent cathodic corrosion protection cannot be rusted under complies with DIN 50976 can also be used as a spot welding paint for color primers quick-drying, abrasion-resistant, electrically conductive, can be painted over temperature-resistant: up to +450 C zinc particles with 98% metallic purity part of the dry film : 90% zinc dust and 5% resin, dissolved in fast-volatile solvents spray on a grease-free and clean surface and allow to dry for approx. 20 minutes for repairing damaged zinc layers for coating drilling and welding areas when working in vehicle maintenance.
Content: 0.4 l (€19.97 / 1 l)
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.