Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
All Products
Electric trolley, suitable for many electric cable hoists, suitable for H and I beams, adjustment range 68-110mm. With universal plates for attaching various lifting devices. Including spacers to avoid hitting the wall. Load capacity up to 1,000kg, power 200W, speed 16m/min, cable length connecting cable 550mm, control cable length 1500mm.
Mobile, lifting height max. 320 mm, max. lifting force 2 t.
Robust compact maneuvering jack with a load capacity of up to 3,000kg. Stroke range from 140mm to 558mm.Total length 1320mm, (stroke) plate diameter 125mm. Ideal all-round helper, weight only 39.8kg.
High-quality industrial-grade trolley, with hand-operated chassis and safety shock absorbers. Easy to use, very low maintenance and flexible to use. For all standardized carriers IPE / HEA / HEB / HEM. With chain length 3m, special lengths up to 12m on request. Lightweight, yet extremely robust design.
Forged tang, conically ground blade, hardened, polished, flexible, plastered weld, red handleVersion: Tyrol
With a comparable inlet pressure, significantly increased blowing effect thanks to the injection principle.
Practical tool for quickly filling larger tires. With the integrated valve screwdriver, the valve can be safely removed and remains in the plug. Easy to screw in after filling. Length approx. 13cm, weight only 96g.
Turns the stone exactly circular and flat. Is guided by the universal support, which also guides the devices. Effortless feeding with double knobs.
Practical tweezers with a length of approx. 12 cm
With rubber handle and double-sided plug-in valve. Hose connection 6 mm.
Multifunctional key ~ from the areas of building technology. 8-beam version: 2 cross keys are connected to each other via magnets to save space Key and reversible bit coupled by a sturdy stainless steel wire rope High-quality surface coatings Weight-optimized zinc die-cast construction Functions: 1. Square: 5/6-7/8-9/10 -11 mm 2. Triangle: 7-8/9-10/11-12 mm 3. Double bit: 3-5 mm 4. Half moon: 6 mm 5. Step square: 6-9 mm 6. Reversible bit: slot 1, 0x7 mm / Phillips PH 2.
According to DIN 345, HSS quality (high-performance high-speed steel)
With offset shaft 13 mm
Profile-ground professional drills in titanium nitrided design. For all work, including higher quality steels. Increasing in 0.5 mm.
High-quality DIN 338 Type N drill bits from Rukko/Terrax with TiN coating for high drilling performance and longer operating times
HSS metal drill bits with cone holder for use in pillar drills, lathes etc. Contents: one drill bit each: 14.5/16/18/20/22/24/26/28/30 mm. Supplied in metal case.
M10x1, including armored hose and round head nozzle. For 500 g screw cartridge. Ergonomic handles, non-slip, permanent control of the fill level and type of grease possible.
With ratchet + 2 round hooks, width 35 mm, length6 m, permissible tensile force 1000 (in strapping2000 daN).
Less effort required due to longer lever, ~gradual release possible, ~width 50mm, length 8 m, ~perm. Tensile force 2500 daN (in strapping 5000 daN).
Practical set of angle screwdrivers with ball heads made of high-quality, chrome-plated S2 steel. For screws with internal TORX profile. It is always possible to quickly find the different keys thanks to the color coding. Contents: T 9, T 10, T 15, T 20, T 25, T 27, T 30, T 40, T 45
The ergonomically shaped 2-component T-handles ensure very good power transmission.The blade is made of S2 steel and has a magnetic tip.Equipment:TX10x75mmTX15x75mmTX20x100mm TX25x100mmTX30x150mmTX40x150mm
This grease gun combines quality, functionality and design. Ergonomic and non-slip plastic handle. For 400g standard cartridges, up to 400bar working pressure. Delivered as a set, including hydraulic round head nozzle and steel pipe. Connection thread M10x1, top model, original UMETA.
Practical lance suitable for all wreaths with a standard plug-in system. Consisting of a 50cm lance with a 90 angle and a 50cm plug-in extension for universal use on vehicle underbody, roofs, drains/rain gutters or other hard-to-reach places.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.