Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Contents: Punch 2, 4.6 mm, center punch, 1 flat and pointed chisel each 125 mm.
High-quality tool trolley for commercial, industrial &~ Agriculture.Equipped with extensive, high-quality tools for demanding work. Complete set with all common tools, socket wrenches and wrenches, pliers &~ Hand tool. With this trolley you always have all the best quality tools at hand!
Original Unior workshop trolley with 6 drawers (store size 520x320 mm, height 2x153 mm, 4x75 mm). Central lock with cylinder lock, external dimensions WxDxH: 625x350x890 mm, weight 33 kg, total load 400 kg, per drawer 40 kg. Professional quality at a sensational price!
Gedore-red workshop trolley with 5 drawers on ball-bearing guide rails.All drawers can be pulled out on both sides, load capacity per drawer 20 kg or 200 kg for the trolley. Sturdy chassis with large wheels for easy transportation to the workplace.Equipped with a practical assortment of tools in high-quality Gedore-red quality. Stored in matching module inserts. Inexpensive but optimally equipped tool set in proven quality. Dimensions: 685 x 963 x 46 2mm W x H x D. Weight: approx. 55 kg
2-layer tissue cleaning cloth, very durable and tear-resistant. 750 sheets of 340x240 mm (LxW) per roll. Price per 2 pieces.
Controlled screw tightening. Repeatability and precision. ~Clearly audible and tactile torque release. ~Adjustable torque wrench with square drive and integrated ratchet function. ~Square drive with ratchet mechanism. ~The torque is set by Turning the handle.The set value is fixed using the lock at the end of the handle.Very easy to read scale with magnifying glass for N m, plus 1/10 scale for exact setting. ~Triggering accuracy: +/-3% tolerance of the set scale value.
Practical torque wrench adjustable from 40 to 220 Nm. 1/2" square drive and L+R switchable. Ideal for universal use or changing wheels.
This 1/2" torque wrench with an adjustment range of 20–100 Nm enables controlled and precise tightening of screws in industrial and trade applications. Advantages & Features • Precise release ±3% – exact tightening of screws according to standard specifications • Reversible square drive – suitable for clockwise and counterclockwise tightening • Ergonomic handle with centering aid – safe handling and precise adjustment Frequently Asked Questions Is the wrench calibrated? The torque wrench is supplied with a traceable test certificate according to DIN EN ISO 6789-2. Can it be used in both directions? Yes, by reversing the square drive, clockwise and counterclockwise tightening is possible. How is the torque wrench adjusted? Torque? Via the easy-to-read dual scale with vernier for fine adjustment. Technical Data • Torque range: 20 – 100 Nm / 15 – 75 lbf·ft • Drive: 1/2" square with ball detent • Standard: DIN EN ISO 6789-2:2017, Type II Class A • Accuracy: ±3 % • Construction: Steel tube, galvanized ratchet • Features: Dual scale with vernier, viewing window, anti-roll device
Robust torque wrench with 3/4" square drive. Torque adjustable from 140 - 980 Nm. The length of 830mm makes it easy to use for high tightening torques. With reversible ratchet for universal use. Supplied complete with plastic cassette.
1/2? square drive, Nm min-max. 40-220Change lever for left and right gearsQuick and safe adjustment of the torque by turning the handleTorque lockAutomatic short release Clockwise triggering accuracy +- 3% Easy to read fine and main scale Length 530mm
1/4? square drive, Nm min-max. 5-25Change lever for left and right gearsQuick and safe adjustment of the torque by turning the handleTorque lockAutomatic short release Clockwise triggering accuracy +- 3% Easy to read fine and main scale Length 250mm
Inexpensive torque wrench with 45 - 210 Nm adjustment range. "~ Drive, switchable right and left, with ratchet function. Complete set with key, extension, plastic case and - 3/8"~ Adapter. Ideal for changing wheels in private areas.
Ratchet mechanism and changeover from right-hand to left-hand gear. Technical data:Drive, 1/4" min. Torque 6 Nm - max. torque 30 NmAutomatic short release: Clear audible and perceptible click signal when the preselected torque is reached, calibrated and final tested. Simple preselection of the torque by turning the knurled ring. The position is then fixed by the insertion ringPractical unlocking mechanism: the attachment is firmly in place and releases automatically at the push of a buttonSturdy, oval shaft made of steel. With optimum rust protection: 2x nickel-plated, then matt chrome-platedCalibrated and tested piece by piece. With permanently lasered serial number for identificationClearly legible analog display for the preselected torqueErgonomic handle that is automatically centered due to its shape. Important for precise triggeringAdditional micro-scale for fine adjustment
Complete professional set with 1/4" Torx TX8 - TX40 sockets with face hole (computers, electrical devices) and external Torx E 4 to E10. Sockets 1/2" drive Torx T45 - T60, Allen 7 - 14mm short and 6 - 12mm long. ~In addition, 1/2" sockets external Torx E 12 - E20 as well as Allen keys 1.25, 2, 2.5 and 3mm. Complete set for universal use in high quality.
Practical key set made of high-quality special steel, holder with grip-friendly soft component for optimal handling. Contents: TX9-10-15-20-25-20-30 and 40.
Practical Torx screwdriver set equipped with all common Torx sockets.With 4 different lengths to be equipped for all individualities. This set should not be missing in any workshop!Contents:55mm length, ": T20, T25, T27, T30, T40, T45, T50, T55, T60, T70100mm length, ": T20, T25, T27, T30, T40, T45, T50, T55, T60, T70140mm length, ": T40, T45, T50, T55, T60, T70200mm length, ": T40, T45, T50, T55, T60, T70
23 pieces, in a sheet metal cassette, for internal and external Torx in commercial design, includes all common Torx keys including internal Torx, drive 1/4"~ and 1/2"~.
High-quality tow rope with a tensile strength of 35,000kg. Rated load capacity 5000kg (safety factor 7:1) Ideal for towing heavy vehicles - for example tractors, trucks or construction machinery. Robust design with reinforced loops, including warning flags.
Tow rope, 2500 kg, length: 4 meters stretchHighly elastic, smooth starting thanks to rubber expanders, no sagging of the rope when towing, with 2 carabiner hooks made of sturdy steel and 2 abrasion protection cuffs, with red safety flag
Highly elastic, jerk-free starting, small space requirement, length 4 m, breaking load 4000 kg, with 2 sturdy safety carabiner hooks.
Lighting tester/tester for 7-pin plugs and sockets. Indicates possible cable defects on the vehicle or trailer in a flash, LED display (without battery).
This lighting tester makes it possible to quickly and easily check the 12V electrical system on trailers and towing vehicles. Thanks to the included adapters, suitable for 7 &~ 13 pin connectors. Battery 9V block (not included).
For tensioning cable mast devices and pulleys, particularly gentle on trees thanks to the soft fabric, long service life thanks to specially reinforced end loops, 2-layer, with 7 times the security.
Content: 4 m (€9.24 / 1 m)
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.