Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Versatile cordless hedge trimmer.For pruning trees and shrubs, shredding garden waste and woodworking. Features a 1/4″ PM3 saw chain for high cutting performance and powerful cuts. Non-slip handle for perfect ergonomics. Tool-free chain replacement, flexible protective cover for safe working, with charge level indicator.GTA 26 cordless brushcutter (single unit) with flexible protective cover, 10 cm Light guide bar and 1/4″ PM3 saw chain – WITHOUT battery and charger!Product advantages:The robust STIHL Picco Micro 3 saw chain on the brush cutter and the high chain speed of 8 m/s guarantee rapid progress and a clean cut.Thanks to the easy-to-read LED charge level indicator, the user is informed of the battery’s remaining capacity at any time at the touch of a button.Thanks to the sprocket cover with wing nut, changing the chain is completely straightforward. No tools are required.For safety, the chain is covered by an asymmetrical protective cover that can be swivelled by over 90°. The user always has a clear view of the cut.The guide bar can be used to its full length. Technical data:Nominal voltage: 11 voltsWeight: 1.2 kgSound pressure level: 77 dB(A)Vibration value (right): 2.8 m/s²Vibration value (left): 2.9 m/s²Guide bar length: 10 cm
This cordless brush cutter, with a 15 cm guide bar and tool-free chain tensioning, offers long running times with two batteries for tree pruning, brush maintenance and small-scale firewood preparation. Advantages & Features • Up to 180 cuts on a single battery charge Two AS 2 batteries provide sufficient power for longer jobs • 1/4"-PM3 saw chain and Light 01 guide bar for quick and clean cuts • 2 AS 2 batteries and AL 5-2 quick charger for longer working intervals without interruption Frequently Asked Questions What jobs is the GTA 30 suitable for? It is suitable for tree and shrub maintenance, cutting timber to size and preparing small quantities of firewood. How thick can the branches be? Branches and pieces of wood up to approximately 15 cm in diameter can be cut cleanly and comfortably. Can the chain be tensioned without tools? Yes, the chain tension can be adjusted quickly and without tools.Technical specifications: Battery system: Stihl AS 24 VoltPower: 0.29 kWWeight: 1.9 kg (with battery)Blade length: 15 cm
This professional cordless hedge trimmer set, featuring a 15 cm blade and two AS 2 batteries, enables powerful cuts through branches and timber, whilst its compact design ensures precise, fatigue-free working. The well-balanced handle sits securely in the hand and facilitates clean cuts even in confined spaces.Advantages & Features• 2 x AS 2 batteries and the AL 5-2 quick charger allow you to start work immediately and ensure long operating times.• A powerful EC motor with a 1/4"-PM3 saw chain ensures high cutting performance and a clean cut.• IPX4-certified housing and side chain tensioning ensure reliable operation even in damp conditions and simplify maintenance.• Constant power: full performance – regardless of the battery charge level.• LED display – shows the battery charge level at the touch of a button.What tasks is the GTA 40 suitable for?The brushcutter is designed for tree and shrub maintenance, gardening and woodwork, as well as for professional use in gardening and landscaping, and for processing wood and wood-like materials on building sites.Are the batteries and charger included in the scope of delivery?Yes, the set includes two AS 2 batteries, the AL 5-2 quick charger and a sturdy carrying case.Can the GTA 40 be used in the rain?Thanks to its IPX4 certification, the tool is protected against splashing water from all directions. Technical specifications:Battery system: Stihl AS 24 VPower: 0.41 kWWeight: 1.8 kg (with battery)Saw blade 15 cm
Powerful compressor with oil-lubricated 2-cylinder V-unit and an intake capacity of 395 L/min and 10 bar maximum pressure. Motor with 2.2 kW/3.0 hp/230 volts at 2800 rpm. Large 50 L tank with plastic wheels and rubber buffers for easy transport and smooth running. Equipped with pressure switch, pressure reducer, and one pressure coupling each on the pressure reducer and tank. Dimensions: 785 x 415 x 685 mm, net weight: 37 kg. Ideal device for demanding private users and for short-term higher air requirements.
Powerful industrial vacuum cleaner with 3x1,200 watts or 3,600 watts of power. Maximum vacuum pressure 190 mbar, IPX4 protection class for dry and wet vacuuming. Permanent filter cartridge with filter - self-cleaning function. Large 60L stainless steel container with practical dirty water drain valve and integrated accessory holder. Supplied with 1x HEPA filter, 1x foam filter, 1.5 m suction hose 38 mm, universal nozzle and metal extension tube. Dimensions 500x445x1350 mm LxWxH, net weight approx. 15 kg.
Universal tool trolley with 7 ball-bearing drawers with 100% full extension. Large wheels for easy transport. Easy to lock with central locking.Dimensions: 7780x460x980mm, drawers: 5x530x400x70mm, 2x530x400x145mm WxDxH. Load capacity per drawer: 40kg.Fully equipped with an extensive tool set in high-quality insert modules for quick access and perfect organization in your workshop.
With this attachment for your Milwaukee battery base unit, you can easily remove weeds or wild growth from your garden. The counter-rotating blades mean there is no stirring up of stones or gravel, which means it can also be used on gravel or edges Paved areas are easily possible.Soiling facades is also a thing of the past with this intention. Cutting width 23cm.
BALLISTOL H1 food oilFor lubrication of parts and machines that occasionally, technically unavoidable, come into contact with food. Loosens blocked mechanisms and provides lasting lubrication. Reduces wear and running noise. Corrosion protection with high aging and oxidation stability. Longer effect and better penetrating properties than mineral white oils. High creeping capacity, no resinification, displaces water. Neutral to painted surfaces, metals, wood, rubber and plastics.
Content: 0.065 l (€82.92 / 1 l)
BALLISTOL H1 food oilFor lubrication of parts and machines that occasionally, technically unavoidable, come into contact with food. Loosens blocked mechanisms and provides lasting lubrication. Reduces wear and running noise. Corrosion protection with high aging and oxidation stability. Longer effect and better penetrating properties than mineral white oils. High creeping capacity, no resinification, displaces water. Neutral to painted surfaces, metals, wood, rubber and plastics.
Content: 0.2 l (€49.05 / 1 l)
Oval steel tube handle · painted · with tension lever and hand guard · hardened and ground planer teeth · for fresh wood
1 quality hammer each with 100, 300 and 500 g.
Easy-to-use hand stapler made of impact-resistant plastic. Suitable for simpler work in the home and garden. Easily processes staples up to 10 mm.
The small hand tacker with high-quality ABS plastic housing for universal use.Processes fine wire staples from 4 to 10 mmHandles hammer tacker staples HHandle lock for storage when not in useClearly visible staple level indicatorUnderloading mechanism with safety release for quick reloadingLoading capacity: 150 x fine wire staple A type 53150 x fine wire staple H type 37Materials that can be processed: Fabrics/ textiles/ upholstery/ carpetsHandle lockClamp viewing windowSafety release
very practical hand tacker made of high-quality plastic housing for universal use, processes fine wire staples up to 10 mm in length and also the hammer tacker staple H.Suitable for everything that can be fastened with a staple, for example for fastening fabrics or ~< br>quick covering of picture frames, with a clip viewing window to see the current filling level of the stapler. Weight: 215 gQuick loading system: bottom loading mechanism with safety release for easy filling of the staple magazineHandle lock for storage when not in useStaple length/type up to : A/4-10 mm Type 53
The small professional tacker with durable, particularly low-recoil zinc die-cast housing for a wide range of household tasks,DIY and in the workshop.Processes fine wire and flat wire staples from 4 to 10 mmHandles hammer tacker staples H and GEasy change between fine wire staples and flat wire staples using the sliding mechanismErgonomic soft grip lever for comfortable workingHandle lock for storage when not in useClearly visible staple level indicatorUnderloading mechanism with safety release for quick reloadingFor precise results, the design line on the front of the tacker indicates the exact staple exitLoading capacity:150 x fine wire staple A type 5385 x flat wire staple D type 53F150 x fine wire staple H type 3785 x flat wire staple G type 11Materials that can be processed:Fabrics/ textiles/ upholstery/ carpetsSoft plastic sheets (2-10 mm)Leather/ imitation leatherfoilsPaper/ cardboardWax/ oiled paperBonding mats (glass wool)Aluminum laminationsSealing rails/ stripsCork panels (2-10 mm)Handle interlockClamp viewing windowSafety releaseStaple exit indicator
Ground from HSS, 3 pieces
Ground from HSS, 2 pieces
Made of tool steel, 2 pieces
Professional safety winch with automatic load brake. Winch for pulling or lifting loads. Complete with 10 m and safety load hook.
Content: 10 m (€29.90 / 1 m)
Simple and robust design with 540kg pulling force (with rolling load on the level), complete with 10m rope and safety load hook.
3 piece set with ergonomic handles. Steel and brass versions for universal use. Length 225mm
Ideal for processing non-rusting materials, longer service life compared to steel brushes.
Standard wire brush with steel bristles approx. 25 mm long and wooden handle
5 pieces per pack, five different sizes, double-sided, claw-like teeth, the teeth spread apart when driven in, ensuring the handle sits firmly, for fitting handles to axes, hoes and hammers.SFIX Hammer Wedge
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.