Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Light-colored, highly adhesive, silicone-free, non-toxic special grease in a quickly evaporating solvent Additives to improve the anti-corrosion properties and anti-aging properties are only contained in very small amounts Particularly smooth, non-dripping lubricating grease Temperature-resistant from -20 C to +140 C Spray behavior : selective jet for targeted application of the desired grease thickness, grease does not run away and can be layered up as desired for the lubrication and maintenance of slide rails, bearings, rollers and hinges in industrial plants, the food and beverage industry and agriculture, etc.
Content: 0.4 l (€13.90 / 1 l)
Width 80 mm, length 500 m in a practical dispenser box.
Content: 500 m (€0.05 / 1 m)
For stationary grinding machines (double grinders) for hardened steel, high-speed steel (HSS) and tool steel, including reduction.
Grinding bench disc made of high-grade corundum especially suitable for grinding blades on Busatis double-blade mowers.V-TR bench grinding discs are suitable for deburring and regrinding drills and turning tools. For hardened steels, high-speed steels (HSS) and tool steels.Outer diameter 250mm, thickness 13mm, bore 40mm
For grinding mower blades DIN 75 and DIN 80. The grinding cone is mounted on a shaft with a 16mm diameter. The outer diameter in the middle of the grinding cone is 85mm, at the edge the diameter is 60mm. The length of the grinding cone is 80mm.
For hatchets and axes. With straight or convex cutting edge.Maximum ax height 170mm.
Practical grinding device, suitable for the NTS 251 wet-dry grinder. Original Aircraft/Holzkraft. The ax is attached to the universal bracket by simply clamping it and can be ideally re-sharpened according to the original shape of the ax.
With Tormek's patented drill grinding device, you can now grind your drill bits with the highest precision. The optimal tip and clearance angles can be set for each drilling process in relation to drill size and material. Even broken drill bits can be ground into a perfect shape.From 3 - 22mm drill bits.
For straight carving gouges and goat feet up to at least 45mm in length. Also for short chisels and carving chisels for electric carving devices. max. tool width 32mm.
For plane irons and chisels. Safety stops prevent the tool from slipping off the grindstone, max. tool width 76mm, max. thickness 9mm.
For finger-shaped bowl turning tubes and profile tubes, carving gouges and goat's feet. Can be adjusted for optional cutting geometries. Also for interchangeable blades with different shapes.max. Tool width 25mm.
For turning tools with straight or convex cutting edges, parting steels, plate steels and roughing gouges. Carving gouges and carving chisels.Can be adjusted to any bevel angle.25mm - 50mm.
For grinding edges, surfaces and weld seams. Suitable for steel and cast iron.
For scrapers, blades, thin parting steels, spokeshave blades, barrel scrapers, scrapers and screwdrivers. Thanks to the patented design, it is securely locked in the desired position on the universal support.
Allows grinding of all commercially available standard circular saw blades.
suitable for order no. 48739
Original Tyrolit-2in1 special grinding wheel for steel and stainless steel. Ideal for all grinding, deburring and shaping applications on curved surfaces. This also makes it ideal for grinding &~ Sharpening mowers, loader wagons, chaff or other knives. The special geometry enables cooling and material-friendly grinding. Absolutely vibration-free work and optimal adaptation to the workpiece!
Original Tyrolit-2in1 special grinding wheel for steel and stainless steel. Ideal for all grinding, deburring and shaping applications on curved surfaces. This also makes it ideal for grinding &~ Sharpening of mower-loader-chopped or other knives. The special geometry enables cooling and material-friendly grinding. Absolutely vibration-free work and optimal adaptation to the workpiece!
Original Tyrolit special grinding wheel for steel and stainless steel. Excellent for sanding &~ Sharpening of mower-loader-chopped or other knives but of course also for all other metals. The special geometry enables cooling and material-friendly grinding. Absolutely vibration-free work and optimal adaptation to the workpiece!
Practical set with 3 grip pliers 125, 180 &~ 250mm, as well as 150mm long jaw pliers. Delivered in a storage roll bag.
with wire cutter with adjusting screw and quick release lever with special jaw for secure gripping, tensioning and holding head made of high-quality chrome vanadium steel forged Other technical properties Total length MV: 225 mm / 10"~
The new and improved Gripple collet not only tensions the wire, but also regulates the applied load for consistently reproducible results and thus maximum wire service life.Gripple collet enables wires up to 400 kg to be tensioned, thanks to the 6:1 conversion of the tensioning mechanismCan be used for fence wires, trellis wires and anchoring ropes with a diameter of up to 6 mmMeasuring range: 100 - 300 kgEase of use and low weight make it easy to work with, even with multiple usesIdeal for use in the areas of pasture fencing as well as vegetable and fruit cultivation
Automatic welding helmet with a continuously adjustable headband. With shade levels from DIN 9 to 13 that are easy to adjust—even while wearing gloves—it is suitable for all types of welding and all users. Reaction time for darkening is only 3/10,000 of a second. Powered by an integrated solar panel, featuring a dual arc sensor and True Color technology for maximum safety and clear visibility of the work area. Field of view: 100 x 48 mm (L x W); weight: only approx. 400 g.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.