Control units & directional control valves

Metal connector with internal thread M10x1.5, cable length 500mm. Closer groping

Metal insert with internal thread M14x1.5, cable length 500mm. Closer groping.

Radio control with hydraulic control valve!2-channel radio control set for hydraulically driven winches, oil motors or hydraulic cylinders with 12 volt monoblock valve, the radio is pre-wired with a 7-pin vehicle plug , the solenoid valve is double-acting and has a connection for pressure continuation, technical data: 12 volts 3 amps, flow rate max. 50 L/min. Connections: 1/2?IG inlet/output and consumer<~cbht/>~1/2?AG to continue printing

Without handle. Suitable for cable pulleys with clevis A6x10 mm, bolt 6 mm.

Suitable for cable pulleys with clevis A6x10 mm, bolt 6 mm.

Reinforced version with aluminum housing. Tensile/compressive force up to 45 kg. Suitable for cable pulleys with clevis A6x10 mm, bolt 6 mm.

Ergonomically shaped handle for universal use in agriculture. Fastening with an internal thread M12x1.25mm. The cable harness is 900mm long and the individual cables have a cross section of 0.5mm. The protection class of the pushbuttons is IP 67, the handle as a unit has the protection class IP 54.The max. voltage is 0-15V and the max. current is 5A.The temperature range is from -40C to +85C.

Lever set for an auxiliary control unit suitable for the Steyr Series 80. The lever set includes all joints, tie rods and lever angles.

Lever set for Deutz DX series from year of manufacture. 1984 to operate the AK control technology additional control devices.

Mounting kit for connecting DVS directional control valves. Consisting of 4 M8 screws and sealing ring set.

​Mounting kit for Bowden cable actuation for GMS control valves, with 4-hole flange and a bolt circle of ø 45 mm, Supplied without Bowden cable!

O-ring set for connecting DVS directional control valves. Consisting of 3 pieces of O-rings for 2-way valves and 6 pieces of O-rings for 3-way valves.

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump FAIE control valve with pressure transfer-auxiliary control unit-hoist.for control valves BM/BF40, GM08, R 1/2?

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump FAIE control valve with pressure transfer-auxiliary control unit-hoist.for control valves BM/BF70, BM100, R 3/4"

Internal thread R1/2"~

Internal thread R1/2?

​The pushbutton is a normally open contact. This means that when the pushbutton is pressed, the circuit is closed and current can flow in the working circuit. The pushbutton has an installation thread M12x0.75mm. The maximum switching capacity is 8 A.Suitable for Faie handles no. 34623, 34624, 34625 and 22800

​For easy retrofitting of a radio control system – NO complicated cable connections! All components are permanently wired and easy to install! 2-channel radio device with wired receiver and transmitter with on/off switch and two functions. The input on the receiver is hard-wired with a 7-pin automotive connector and the outputs with a 3-pin DIN plug each.Frequency: ISM 868 / 915 MHzOutputs max. 5 A,Protection class: IP 67.

​PPlug-ready radio set for 12 and 24 volts!For easy retrofitting of a radio control - NO complicated cable connection!All components are pre-wired and easy to install!2-channel radio set with wired receiver and transmitter with on/off switch and two functions. The 2-pole input on the receiver can be connected to 12 V or 24 V and the outputs each with a 3-pin DIN plug. Frequency: ISM 868 / 915 MHz  Outputs max. 5 A, Protection class: IP 68.