Products

The holder is suitable for all standard bottles. It is made of plastic, has a safety edge and can be attached to the cage or enclosure from the outside.

Galvanized with plastic shell, including holder. Easy to attach to the enclosure/grid. 2 pieces/pack

Flaschendichtung in Weiß, passend zu 5-Liter-Flaschen. Maße: Außendurchmesser 4,2 cm, Innenloch 1,6 cm.

The bottle washer is placed on a table and filled with water or a cleaning solution. The vessel can hold approx. 300 ml. The bottle is pressed upside down onto the spigot and by moving it up and down, water is forced into the bottle, which rinses it from the inside.

The water-operated bottle cleaning machine is suitable for cleaning bottles up to 2 litres and operates at a water pressure of 3–6 bar. A separate outlet for rinse water can be shut off by pressing a button, allowing easy bottle changes. The cleaning shaft has a diameter of Ø 15 mm and a shaft length including stainless steel brush of 34 cm. The machine is also supplied with a Gardena connection. Advantages & Functions • Water pressure of 3–6 bar for operating the bottle cleaning machine • Shut-off rinse water outlet for easy bottle changes • 34 cm cleaning shaft with stainless steel brush for bottle cleaning Frequently Asked Questions Which bottles is the machine suitable for? The bottle cleaning machine is suitable for bottles up to 2 litres. What water pressure does the machine require? The machine operates at a water pressure of 3–6 bar. What are the dimensions of the cleaning shaft? The cleaning shaft has a diameter of Ø 15 mm and a shaft length including stainless steel brush of 34 cm.

​Die Glasflasche mit Kunststoff-Schraubverschluss ist ideal für die eigene Saftproduktion. Ob Apfel-, Birnen- oder Beerensaft – Sie füllen Ihren Saft sauber und hochwertig ab.Das Glas ist geschmacksneutral. So bleibt das Aroma Ihres Saftes unverfälscht erhalten. Gerade bei Direktvermarktung oder für den Eigenbedarf ist das ein großer Vorteil.Der Kunststoff-Schraubverschluss schließt dicht und zuverlässig. Kein Auslaufen beim Lagern oder Transport. Die Flasche eignet sich für den Kühlschrank, den Hofladen oder den Verkauf ab Hof.Durch die stabile Ausführung ist sie mehrfach verwendbar. Nach dem Entleeren lässt sie sich leicht reinigen und wieder befüllen.Geschmacksneutrales GlasDicht schließender KunststoffverschlussIdeal für selbst gepressten SaftMehrfach verwendbarSaubere und hochwertige Präsentation

Juice bottle for homemade juices or schnapps, with a practical swing-top closure.The glass is flavor-neutral, preserving the pure aroma of your juice.This is a significant advantage, especially for direct marketing or personal use.The swing-top closure seals tightly and reliably.No leaks during storage or transport.The bottle is suitable for the refrigerator, farm shop, or direct sales.Its sturdy construction allows for multiple uses.After emptying, it is easy to clean and refill.Flavor-neutral glassIdeal for freshly squeezed juiceReusableClean and high-quality presentation

​The 5-liter bottle with swing top is a true all-rounder that no household should be without. Whether for storing home-made juices and lemonades or for transporting water - this bottle is always the right choice.Ø 18mm, height: 370mm.Advantages of the 5-liter bottle with swing top:Versatile: the bottle is suitable for storing and transporting all kinds of drinks.Practical: The swing top is easy to open and close and ensures that the bottle is tightly sealed.Sturdy: The bottle is made of robust glass and can withstand a lot.The bottle is reusable and therefore a sustainable alternative to disposable bottles.Hygienic: The bottle is easy to clean and dishwasher-safe.Translated with DeepL.com (free version)

Suitable for BUSATIS mower Bidux 1205

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

Lens: Clear, right/left

Without drive, adjustable to carrier width via thread.

​Bottom knife for Busatis BM 321 KW double cutter bar with a total number of 20 blades. Of these, 3 pcs. blades with knob for holding the knife guide arms. The positions of the blades with knob, starting from the cutterhead, are on the 5th, 10th and 15th blade. The last blade is an end blade that is ground on both sides. A cutter head plate is riveted to the lower cutter head. The pitch of the blades from blade centre to blade centre is 76 mm. The knife is supplied complete with the lower cutter head, on the left-hand side when viewed in the direction of travel. 

​Bottom blade for Busatis double knife bar with a total number of 22 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted-on lower blade head, on the right-hand side when viewed in the direction of travel. Suitable for Moty Gigant motorised mowers with Busatis double blade mower. Overall length with cutterhead: 166 cm Length of cutter back: 166 cm Cutter head on the right in the direction of travel, offset 25 mm inwards Cutterhead length: 207 mm Total number of blades: 22, of which 4 blades with knob Position of the blades with knob starting from the cutter head: 4th, 9th, 14th and 19th blade Blade pitch (blade centre to blade centre): 76mm

​Bottom knive for double knife bar Busatis with a total number of 23 blades. Of these, 3 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76,2 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Suitable for Nussmüller-Rasant Junior 90 motorised mowers with Busatis double blade mower.Cutting width: 167 cm Overall length with cutterhead: 177 cm Length of cutter back: 173 cm Cutter head on the left in the direction of travel, 40 mm projection over the back of the blade Cutterhead length: 335 mm Total number of blades: 23, of which 3 blades with knobPosition of the blades with knob starting from the cutterhead: 6th, 12th and 18st blade Blade pitch (blade centre to blade centre): 76,2 mm

​Bottom knife for Busatis double knife bar with a total number of 24 blades. Of these, 3 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted-on lower blade head, on the left-hand side when viewed in the direction of travel. Suitable for Bucher and Reform Kombi M12 motorised mowers with Busatis double blade mower. Overall length with cutterhead: 184 cm Length of cutter back: 181 cm Cutter head on the left in the direction of travel, 28 mm projection over the cutter back Cutterhead length: 360 mm Total number of blades: 24, of which 3 blades with knobPosition of the blades with knob starting from the cutterhead: 5th, 12th and 19th blade Blade pitch (blade centre to blade centre): 76 mm

Bottom knife for bidux double knife bar with a total number of 24 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 84 mm. The blade is supplied complete with the riveted-on lower blade head, on the left-hand side when viewed in the direction of travel. Total length with knife head: 2020 mm Length of knife back: 1990 mm Cutter head 5840.055.01, 345.0770 Protrusion of knife head over knife back: 28 mm Length of knife head: 400 mm Tang knife head: 18 mmTotal number of blades: 24, of which 4 blades with knobPosition of the blades with knob starting from the knife head: 6th, 11th, 16th and 21st. Blade and blade pitch (blade center to blade center): 84mm

Unteres Schermesser mit 24 Zähnen. Schnitthöhe 5 mm. In Kombination mit Obermesser Best.Nr. 125111, ideal für Pferde mit Cushing-Syndrom geeignet.

Lower blade, 26 blades, DME1606BOverall length including blade head: 2000 mmLength of blade back: 1965 mmBlade head 5840.053.01, 345.0700 Projection of blade head beyond blade back: 28 mm Blade head length: 360 mm Blade head pin diameter: 16 mm Blade head orientation when viewed in the direction of travel: leftTotal number of blades: 26, including 4 mushroom blades and 1 end blade Position of the mushroom blades relative to the blade head 6th, 11th, 16th and 21st bladesBlade spacing (centre to centre): 76 mmOriginal ESM lower blade: 265.5980

Connection joint between rocker arm and bedknife head. Thread M14x1.5, bore 18mm, left

Connection joint between rocker arm and bedknife head. Thread M14x1.5, bore 18mm, right

Thread M14x1.5, pin hole 16 mm.