Products

Affordable home water pump for automatic water supply to your garden or similar areas. Quiet pump with 600 watts/230 volts and a maximum flow rate of 3,200 L/h or a maximum pressure of 3.5 bar. The sturdy 25-liter steel tank and the automatic pressure switch ensure convenient operation by automatically turning the pump on and off as needed.Technical Specifications: Connection threads: 2x 1" female, Weight: approx. 10 kg, Protection class: IP X4.

​Sherbet DIÄT supplementary feed for young ruminants (calves, lambs, kids)Tasty sherbet powder with vanilla flavorRapid recovery in the event of intestinal disorders (e.g. diarrhea)Provides valuable electrolytesQuickly available energy thanks to a high proportion of lactoseGood hyperacidity bufferEasy to use: 1 sachet for 2 liters of waterPerfect alternative to Effydral®Carton with 16 sachets of 100g eachApplication:- Dissolve one sachet of Hydrafeed or a dose of 100g (one measuring cup) in 2l of lukewarm water and add to feed.For calves: 2 l per meal - 2 to 3 times a day.For lambs / kids: 150 to 200 ml per meal (2 l for 3 or 4 animals) 2 to 3 times a day

Radio control with hydraulic control valve!2-channel radio control set for hydraulically driven winches, oil motors or hydraulic cylinders with 12 volt monoblock valve, the radio is pre-wired with a 7-pin vehicle plug , the solenoid valve is double-acting and has a connection for pressure continuation, technical data: 12 volts 3 amps, flow rate max. 50 L/min. Connections: 1/2?IG inlet/output and consumer<~cbht/>~1/2?AG to continue printing

Crane winch, auxiliary winch with gear reduction for higher pulling power, the reduction is loosened to be pulled out. The winch is pre-assembled in a metal housing - simply connect it to a double-acting control device.For mounting on cable winches or forwarding wagons, a forestry crane , forwarding tongs or pile shield. Can be used for anything that needs to be pulled.For mounting on winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 1400 kg pulling force at 175 bar,large drum with 40 meters of 6 mm wire rope with hook,The rope speed is 0.45 meters / second at 40 liters/min. Connections: 3/8?AG/IT..

​Crane winch, auxiliary winch with gear reduction for higher pulling force, the reduction is released for pulling out.The winch is pre-assembled in a metal housing - simply connect to a double-acting control unit.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Can be used for anything that needs to be pulled.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Many Kesla and Patu cranes already have the appropriate attachment holes!Max. 1700 kg pulling force at 175 bar,Large drum with 35 m 8 mm wire rope with hook,The rope speed is 0.36 metres / second at 40 l/min.Connections: 3/8 inch AG/IG.

​Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling force. The gear reduction is released for pulling out.The winch is pre-assembled in a metal housing - simply install in a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation,Valve with built-in pressure transfer line and extra return line,max. 50 l/min flow rate, max. 175 bar, connections 1/2 inch female thread, pressure transfer 1/2 inch male thread.Dimensions of the winch housing: 40 x 25 x 20 cm.Can be used for anything that needs to be pulled.For mounting on cable winches or forwarder wagons, a forestry crane, forwarder tongs or forwarder blade.Many Kesla and Patu cranes already have the appropriate attachment holes!Max. 1400 kg pulling force at 175 bar,The rope speed is 0.45 metres / second at 40 l/min.Large drum with 40 m 6 mm wire rope with hook.Complete set with hoses and HY plug,Electro-magnetic valve with professional radio unitpermanently wired with 7-pin vehicle plug.

Crane winch, auxiliary winch with gear reduction for higher pulling power, the reduction is released to be pulled out.The winch is pre-assembled in a metal housing - simply connect it to a double-acting control device.For mounting on cable winches or forwarding wagons, a forestry crane , forwarding tongs or pile shield.Dimensions of the housing: 40 x 25 x 20 cm.Can be used for anything that needs to be pulled.For mounting on winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 2200 kg pulling force at 175 bar,large drum with 35 meters of 8 mm wire rope with hook,The rope speed is 0.36 meters / second at 40 liters/min.Connections: 3/8?AG/ IG.

The light and compact auxiliary winch for mounting on cable winches or forwarding tongs, log splitters or even on a pole blade, ATV or small forwarding vehicle. The winch is pre-assembled on a plate with fasteners that can be easily mounted to your device. This crane winch is a robust construction and made for demanding use in the forest. Simply connect to a double-acting control device. Can be used for anything that needs to be pulled.Compact crane winch - easy and quick assembly.The maximum pulling force is a full 700 kg at a maximum of 175 bar.The rope speed is 1.2 meters / second at 40 liters/min.Connections: 3/8?AG/IG.Dimensions of the winch approx. 24 x 24 x 15 cm, holding plate with 2 x 17 mm holes with 70 mm hole spacing.<~cbht />~Drum: 60 mm inner and 150 mm outer diameter, 50 mm wide.Winch We-700 with bracket and 20 meters of 5 mm wire rope.

Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling power. The reduction is released to pull it out.The winch is pre-assembled in a metal housing - simply install it into a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation, <~cbht />~Valve with built-in pressure transfer and extra return, <~cbht />~max. 40 liters/minute flow, max. 175 bar, connections 1/2?IG, pressure continuation 1/2?AG.<~cbht />~Dimensions of the winch housing: 40 x 25 x 20 cm. Can be used for anything that needs to be pulled.For mounting on cable winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes ! Max.1700 kg pulling force at 175 bar,The rope speed is 0.36 meters / second at 40 liters/min.large drum with 35 meters of 8 mm wire rope with hooks. Complete set with hoses and HY plug, electro-magnetic valve with professional radio unit >Fixed wired with 7-pin car plug.

Crane auxiliary winch with radio control. Winch with gear reduction for higher pulling power. With freewheel for pulling out the rope.The winch is pre-assembled in a metal housing - simply install it into a hydraulic circuit.Control valve: 12 volt solenoid valve with additional manual operation,Valve with built-in pressure transfer and extra return ,max. 40 liters/minute flow, max. 175 bar, connections 1/2 Zoll IG, pressure continuation 1/2 Zoll AG.Dimensions of the winch housing: 40 x 25 x 20 cm.Can be used for everything What needs to be pulled can be used.For mounting on cable winches or forwarding wagons, a forestry crane, forwarding tongs or pile shield.Many Kesla and Patu cranes already have the appropriate mounting holes!Max. 2200 kg tensile force at 175 bar,The rope speed is 0.29 meters / second at 40 liters/min.Large drum with 35 meters of 8 mm wire rope with hook.Complete set with hoses and HY plug,electro-magnetic valve withprofessional radio unitwith 7 -pin vehicle plug permanently wired.

The light and compact auxiliary winch with radio control, for installation on cable winches or forwarding tongs, log splitters or even on a pole blade, ATV or small forwarding vehicle. The winch is pre-assembled on a plate with fastening elements that can be easily attached to your device can be mounted.This crane winch is a robust construction and made for demanding use in the forest.It is operated via radio on a 12 V control valve with additional manual operation. Control valve: 12 volts Simply install solenoid valve into a hydraulic circuit<~cbht />~Valve with built-in pressure transfer and extra return,<~cbht />~max. 40 liters/minute flow, max. 175 bar, connections 1/2?IG, pressure continuation 1/2?AG.The maximum tensile force is a full 700 kg at a maximum of 175 bar.The rope speed is 1 .2 meters / second at 40 liters/min.Dimensions of the winch approx. 24 x 24 x 15 cm, holding plate with 2 x 17 mm holes with 70 mm hole spacing.<~cbht />~ Drum: 60 mm inner and 150 mm outer diameter, 50 mm wide.Winch We-700 with bracket and 20 meters of 5 mm wire rope.Can be used for anything that needs to be pulled . Complete set with hoses and HY plug, electro-magnetic valvewithprofessional radio unitwith 7-pin car plug< /strong> permanently wired.

Pressure force 2261 kg, tensile force 1378 kg at 180 bar, connection G 1/4, nominal pressure 250bar

Pressure force 14137 kg, tensile force 10602 kg at 180 bar, connection G 1/2, nominal pressure 250bar

Bolt d=40 mm, connection G=R1/2", T=69 mm, U=25 mm, pressure force 14137 kg, tensile force 9047 kg at 180 bar, nominal pressure 250 bar.

Pressure force 20357 kg, tensile force 13430 kg at 180 bar, connection G 1/2, nominal pressure 250bar

Bolt d=16 mm, connection G=R1/4", T=35 mm, U=15 mm, pressure force 883 kg, tensile force 521 kg at 180 bar, nominal pressure 250 bar.Joint eye 16 mm with lubrication hole on both sides .

Pressure force 883 kg, tensile force 521 kg at 180 bar, connection G 1/4, nominal pressure 250bar

Pressure force 1447 kg, tensile force 882 kg at 180 bar, connection G 1/4, nominal pressure 250bar

Bolt d=20 mm, connection G=R1/4", T=38 mm, U=22 mm, pressure force 1447 kg, tensile force 882 kg at 180 bar, nominal pressure 250 bar.Joint eye 20 mm on the piston rod side with a lubrication hole .

Bolt d=20 mm, connection G=R1/4", T=38 mm, U=22 mm, pressure force 2261 kg, tensile force 1378 kg at 180 bar, nominal pressure 250 bar.Joint eye 20 mm on the piston rod side with a lubrication hole .

Pressure force 3534 kg, tensile force 2650 kg at 180 bar, connection G 3/8, nominal pressure 250bar

Bolt d=25 mm, connection G=R3/8", T=45 mm, U=22 mm, pressure force 3534 kg, tensile force 2261 kg at 180 bar, nominal pressure 250 bar.

Pressure force 3534 kg, tensile force 2261 kg at 180 bar, connection G 3/8, nominal pressure 250bar

Bolt d=30 mm, connection G=R3/8", T=51 mm, U=23 mm, pressure force 5089 kg, tensile force 2827 kg at 180 bar, nominal pressure 250 bar.