Products

Grinding bench disc made of high-grade corundum especially suitable for grinding blades on Busatis double-blade mowers.V-TR bench grinding discs are suitable for deburring and regrinding drills and turning tools. For hardened steels, high-speed steels (HSS) and tool steels.Outer diameter 250mm, thickness 13mm, bore 40mm

For grinding mower blades DIN 75 and DIN 80. The grinding cone is mounted on a shaft with a 16mm diameter. The outer diameter in the middle of the grinding cone is 85mm, at the edge the diameter is 60mm. The length of the grinding cone is 80mm.

For hatchets and axes. With straight or convex cutting edge.Maximum ax height 170mm.

Practical grinding device, suitable for the NTS 251 wet-dry grinder. Original Aircraft/Holzkraft. The ax is attached to the universal bracket by simply clamping it and can be ideally re-sharpened according to the original shape of the ax.

With Tormek's patented drill grinding device, you can now grind your drill bits with the highest precision. The optimal tip and clearance angles can be set for each drilling process in relation to drill size and material. Even broken drill bits can be ground into a perfect shape.From 3 - 22mm drill bits.

For straight carving gouges and goat feet up to at least 45mm in length. Also for short chisels and carving chisels for electric carving devices. max. tool width 32mm.

For plane irons and chisels. Safety stops prevent the tool from slipping off the grindstone, max. tool width 76mm, max. thickness 9mm.

For finger-shaped bowl turning tubes and profile tubes, carving gouges and goat's feet. Can be adjusted for optional cutting geometries. Also for interchangeable blades with different shapes.max. Tool width 25mm.

For turning tools with straight or convex cutting edges, parting steels, plate steels and roughing gouges. Carving gouges and carving chisels.Can be adjusted to any bevel angle.25mm - 50mm.

For grinding edges, surfaces and weld seams. Suitable for steel and cast iron.

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316, M2, M3.

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316, M2, M3.

​Set of 3 replacement sharpening stones for chain sharpener 12 volt, FAIE order no.: 1200750 1x each with the following diameters Ø: 4.0 mm, 4.8 mm and 5.5 mmfor all common saw chains.

For scrapers, blades, thin parting steels, spokeshave blades, barrel scrapers, scrapers and screwdrivers. Thanks to the patented design, it is securely locked in the desired position on the universal support.

Grinding wheel width and the corresponding saw chain pitch:3.2 mm to 1/4?, .325? and 3/8?Hobby4.5 m m for 3/8? and .404?6 mm for 7/16?, 1/2? and for depth gauges

Grinding wheel width and the corresponding saw chain pitch:3.2 mm to 1/4?, .325? and 3/8?Hobby4.5 m m for 3/8? and .404?6 mm for 7/16?, 1/2? and for depth gauges

Grinding wheel width and the corresponding saw chain pitch:3.2 mm to 1/4", .325" and 3/8" Hobby4.5 mm or 4,7 mm for 3/8" and .404"6 mm for 7/16", 1/2"and for depth gauges

Green grinding wheel made of stone, especially for hardened saw chains

Diamond grinding wheel for sharpening carbide-tipped saw chains, suitable for the Sharp 145, Jolly EVO and Super Jolly sharpening devices.Width: grinding material 3.3 mm, mount 6.0 mm.Outer diameter 125 mm, inner diameter 22.2 mm.

​Diamond-shaped grinding wheel for sharpening carbide-tipped saw chains, suitable for the Sharp 145, Jolly EVO and Super Jolly sharpening devices,outer diameter 145 mm, inner diameter 22 mm.

Green grinding wheel made of stone, especially for hardened saw chains

Allows grinding of all commercially available standard circular saw blades.

suitable for order no. 48739