Products
The practical pocket knife with half-shell motif BULLE, blade length 8cm
With wooden inlays in the handle. Stylish pocket knife - practical and also a very nice gift for everyone. Blade length 7.6cm, blade material stainless steel, handle stainless steel with wood applications
Simple and quick coupling and uncoupling of implements on Category 2 and 3 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 855 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 59 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg.The quick-change frame in conjunction with hydraulic actuation enables a cost-effective conversion to a fully hydraulically controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.
Simple and quick coupling and uncoupling of implements on Category 2 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg.The quick-change frame in conjunction with hydraulic actuation enables a cost-effective conversion to a fully hydraulically controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.
Simple and quick coupling and uncoupling of implements on category 2 and 3 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg. Hydraulic locking with a double-acting cylinder. Includes 1.5 m hose with connection M18x1.5/12L union nut.
Simple and quick coupling and uncoupling of implements on Category 2 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg. The side locking can be easily converted from the right side to the left side by loosening 2 screws.The quick-change frame in conjunction with a hydraulic actuation enables a cost-effective conversion to a fully hydraulic one controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.
Scale 2m wood with internal angle fitting "The Original", angle impression on the 2nd link, locks exactly at the angle at 90, ends in scale color, duplex scale in black, accuracy class III, with CE mark. With hidden rivets, springs made of high-quality steel.
Terry cloth made from high-quality ring-spun yarns 100% pure cotton, manufactured according to Oeko-Tex Standard 100, size: 50 x 100 cm, ~ Quality: 450 g/m
This robust and handy device cracks up to 15kg of nuts per hour.Thanks to the adjustable inlet, nuts with a of 10 to 50 mm can be processed.It is driven by a hand crank.For walnuts and hazelnuts , pecans, acorns, ..Dimensions 16 x 13 x 38 cmWeight: 5 kg
Who doesn't know the difficulties involved in the annoying and laborious process of cracking walnuts or hazelnuts? With this machine, which is suitable for nuts from 10 to 50 mm thanks to the adjustable inlet, approx. 90% are cracked on the first pass. The extremely robust device is operated by a hand crank and cracks up to 30 kg of nuts per hour. This not only saves your nerves but also saves you time.Robust construction made of steel, which stands independently on the table.Thanks to the adjustable inlet, nuts with a of 10 to 50 mm can be processed. for walnuts, hazelnuts, pecans, acorns, chestnuts,...Weight approx. 11 kgDimensions 24 x 30 x 57 cm (without handle)
Voluntary contribution to costs for recyclable packaging and more sustainability for 1.49. Fair to the environment. Fair in price. FAIE takes responsibility, looks for solutions and develops new strategies for the sustainable use of resources. We do everything we can to reduce waste production, use packaging sensibly and sustainably and still ensure safe delivery of goods. We are constantly looking for recycled and recyclable packaging materials, as well as new sustainable solutions for safe shipping. However, environmentally friendly packaging material and recycled materials are significantly more expensive to purchase. In addition, some materials require complex and expensive packaging systems in order to be used. With the voluntary cost contribution of just 1.49, you can support us in working together to protect the environment, reduce waste and test new materials. Test on an ongoing basis , we renew and change packaging materials and complex systems. For example, we are currently testing alternatives to plastic parcel tape. During the changeover phase, we test a wide variety of materials, so you may still be served with conventional packaging.
The equipment set is designed to protect against falls. It consists of a NEWTON harness, a mobile fall arrester ASAP, an ASAP'SORBER energy absorber, three OK TRIACT-LOCK carabiners, an ANNEAU round sling, an ASAP'AXIS 11 mm rope with sewn termination and integrated shock absorber, a weight to weigh down the rope and a BUCKET transport bag. The set is available in two sizes and two lengths.
A masterpiece made of Swiss stone pine for your kitchen. Whether for your daily fresh grain muesli or the finest baking flour, this classic grain mill made of fragrant Swiss stone pine processes all cereals with ease. Thanks to the powerful 100 mm millstone, it transforms even hard corn into golden yellow flour in seconds. A real powerhouse that delivers plenty of the finest flour – and even works at twice the speed when grinding coarse grain. A long-lasting companion and a treat for every family.Technical data:Compact dimensions:The Family offers an exceptional balance between space-saving and robust functionality. Its elegant design fits into any kitchen and proves that true quality lies in the clever use of space.Lightweight with great performance:With its impressive grinding performance, the Family is not only a symbol of efficiency, but also proof that you don't have to compromise on the quality of fresh ingredients.Durable material:The choice of Swiss stone pine wood not only stands for durability, but also for sustainability, bringing a piece of nature directly into your kitchen.Efficient grinding technology:The Family uses state-of-the-art technology to deliver perfect results every time. Whether you want fine flour or coarse meal, this mill will never let you down.Self-cleaning grinding chamber:Maintaining your mill has never been easier. With the self-cleaning function of the Environmentally friendly and energy efficient:The Family represents our commitment to sustainability. Its efficient energy consumption means that you are not only protecting your food, but also the environment.Versatile application:From grains to spices to salts, the Family is your reliable partner for all grinding tasks. Discover the variety of fresh ingredients in your kitchen.Long warranty period:Our 8-year warranty is a promise to you – a promise that the Family mill will be a long-term companion on your culinary adventures.Conclusion:The Family grain mill is not just a kitchen appliance, but a statement of quality, sustainability, and healthy living. It not only offers outstanding performance and versatility, but is also an asset to any kitchen. With the Family, you are choosing the best – for yourself and your loved ones.
High-quality shoe/boot dryer made of stainless steel. Four curved hangers enable quick drying and ventilation of all types of shoes and gloves. Thanks to its compact design, the Family2 requires very little space. Controlled by a 4-hour wind-up timer. Technical data: Radial fan 65 watts/230 volts. Dimensions: 660x235x370mm HxWxD Weight: 5kg
High-quality shoe/boot dryer made of stainless steel. Four curved hangers enable quick drying of all types of shoes and gloves. Thanks to its compact design, the Family2 requires very little space. Controlled by a 4-hour wind-up clock. Technical data: 20 watts/230 volts. Dimensions: 660x235x370mm HxWxD Weight: 5kg
Professional boot/shoe dryer made of stainless steel. Warm air dries shoes and gloves in just a few minutes and removes sweat odors. Up to 4 pairs of shoes in one go. Thanks to its wall mounting and compact dimensions, the Family4 takes up very little space. Top features include a 24-hour timer and a 4-hour wind-up clock. Technical data: 130 watts/230 volts Dimensions: 660x580x370mm HxWxD Weight: 10 kg.
8-wing, hole diameter: 9mm, hole spacing: diagonal 65mm, outer : 415 mmsuitable for water pump order no. 63142
The fan broom easily cleans paths and all solid floors of leaves and other coarse debris with a comfortable 50 cm work surface. The tines are made of hardened spring steel and do not bend. Compatibility with almost all multi-star handles. WOLF-Garten offers a 35-year guarantee on this product.
Soft start and temperature-dependent speed control of the fan. The maximum starting current is approx. 10% above the rated fan current. The fan speed is varied depending on the oil temperature using a temperature sensor (accessory). Overload and reverse polarity protection on voltage input. Time-delayed fan activation for self-protection. Control range with temperature sensor 45-55C, switching point with temperature switch 50C. Includes adapter cable for temperature switch (61128, 77617) or sensor (61127, 77616) with plug.
Outer diameter: 77 mmLength: 226 mmShaft diameter: 8 mmPower consumption: 80 watts Voltage: 12 V
Fan motor complete with housing, sealing profiles and fastening material suitable for asa oil cooler type 0176/0177/0256/0257, TT16, TT25By using a fan controller, the maximum charging and discharging current (ripple current) can be kept at the maximum value of 1%.Temperature range from -20 °C to 80 °CScope of delivery: 1 pc. Fan motor complete with housing, 4 pcs. screws with nuts and washers, 4 pcs. Spacers, 2 pcs. sealing profiles