Products

Padded shoulder strap for comfortable and back-friendly weight distribution, quick release hook with large base.

Keep your pigs in a species-appropriate manner and reduce the frequency of tail and ear biting by giving them roughage! Extremely close bar spacing (20mm) reduces the risk of the slurry system becoming blocked because little feed is lost. For slatted floors, mounting above the feeding trough is recommended.Hot-dip galvanized, double version, 480 x 530 x 440 mm, for partition 35-40 mm.

Keep your pigs in a species-appropriate manner and reduce the frequency of tail and ear biting by giving them roughage! Particularly suitable for administering raw fiber material in pig stables. Galvanized, for attaching to the box or side wall up to a maximum width of 43 mm. Due to the small width of 40 mm, only little material is lost and therefore the risk of blockages in the slurry system is reduced. Bar thickness: 6 mm~ L x W x H: 62.5 x 51 x 48 cm.

ideal for transporting heavy objects such as windows, glass doors or mirrors 120 mm , up to 60 kg

Ideal fastening of two rail systems running one behind the other. Easily attached to the masonry, galvanized.BG2 with spacing 90mm (running pipe center-center), height 95mm, width 150mm

Ideal fastening of two rail systems running one behind the other. Easily attached to the masonry, galvanized.

Particularly suitable for hydraulic cylinders that need to hold large loads in position. Max. pressure 350 bar, control ratio 4:1.

To keep the load in one position without leaking oil! The following functions are achieved:Limitation of the oil flow (even in the event of a line break)Prevents a pulling or pushing load from rushing awayPressure limiting functionUse only possible with control valves that have a consumer tank in the zero position -Connection (floating position) havePressure range 60 to 350 bar., max. load pressure 270 bar, control ratio 4.25:1.

Partial ratio 1:1. The incoming oil flow is divided into 2 equal parts regardless of the operating pressure. If the flow direction changes, the partial flows are added back together. Eg for silo tongs with 2 cylinders. If the silo tongs are filled unevenly, the cylinders are subjected to different stresses. This can be prevented with the flow divider.

​Bolt-øD=20.5 mm, connection P=G 3/8 inch, G=28 mm, F=40 mm, compressive force 2261 kg, tensile force 1378 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=20.5 mm, cross bushing ØD=20.5 mmCylinder Ø C = 50 mmPiston base Ø K = 50 mm

Bolt-øD=25.5 mm, connection P=G 3/8 inch, G=43 mm, F=45 mm, compressive force 5089 kg, tensile force 3810 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=25.5 mm, cross bushing ØD=25.5 mmCylinder Ø C = 70 mmPiston base Ø K = 70 mm

Bolt-øD=30.5 mm, connection P=G 3/8 inch, G=34 mm, F=55 mm, compressive force 6927 kg, tensile force 4665 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=30.5 mm, cross bushing ØD=30.5 mmCylinder Ø C = 80 mmPiston base Ø K = 80 mm

The valve is used for overpressure or overload protection in 2 pressure lines. It can be used both as a shock valve and as a pressure relief valve for continuous operation. The valve is an ideal protection against sudden pressure surges and enables the setting of different pressures at two inlets of the hydraulic system. The shock valve is used to protect hydraulic motors, synchronised cylinders and systems with the same stroke volume. For example, the protection of snow plough cylinders that are constantly exposed to external forces and loads during operation. Shock valves are positioned as close as possible to the consumer to be protected. Adjustable pressure range: 40 - 210 bar

​The valve is used for overpressure or overload protection in 2 pressure lines. It can be used both as a shock valve and as a pressure relief valve for continuous operation. The valve is an ideal protection against sudden pressure surges and enables the setting of different pressures at two inlets of the hydraulic system. The shock valve is used to protect hydraulic motors, synchronised cylinders and systems with the same stroke volume. For example, the protection of snow plough cylinders that are constantly exposed to external forces and loads during operation. Shock valves are positioned as close as possible to the consumer to be protected. Adjustable pressure range: 40 - 210 bar

Width 50 mm, length 10 m.

Heat-resistant silicone scraper with stainless steel handle. The plastic button in the handle ensures a secure hold. Dishwasher safe. Dimensions 26.5x5.5 cm

1 piece, plastic, white.

Pastry wheel with plastic handle. Wavy edge for a decorative decoration of your bakeries. Particularly suitable for pasta, sheets or shortcrust pastry. Dishwasher safe.

Equipment:70 pieces of dowels 6 mm80 pieces of dowels 8 mm10 pieces of dowels 10 mm 1 each stone drill: 6.8 and 10 mm

Replacement drawer for the Europa laying nest (middle model, top and bottom). Wooden frame with wire mesh base. Dimensions: (L x W) 89 x 41 cm

PVC suction and pressure hose with hard PVC spiral. The high rigidity (Shore hardness 85) of the hose makes it possible to precisely position the end piece on the drag hose distributor near the ground. This ensures optimal and precise spreading of the manure.

Film-forming care spray for animals to support natural skin regeneration.Promotes the rapid self-healing of superficial injuries and skin lesions - the wounds are covered by a protective film and protected from possible infections. ~Reduces sucking and cannibalism through a natural bitter substance, also ideal for eczema between the legs.Without waiting time! Simply spray onto affected skin areas and repeat several times until healing occurs. ~Care components: resin of the dragon's blood tree, lactic acid, propylene glycol

Downpipe clamp insulators fit marten kit 131935