Hydraulikprogramm

Over the last 3 decades, VIVOIL has earned an excellent reputation among European suppliers of hydraulic pumps. The result of research, ingenuity and a high level of manual skills is demonstrated by the new product lines of pumps, gear motors and gear flow dividers.Vivoil has always identified itself with great attention to detail and believes that this is the other side of the coin for is a company that is committed to offering its customers quality and value.Reliability, flexibility and quality have been lived every day in the company for years!

Linksgewinde M36x3, Kat. 3, Bohrung 32mm, Gewindelänge 200 mm, verzinkt. 

Automated workflows in manufacturing, testing, controlling and regulating require the highest precision. This is where our multi-coupling 4-way set comes into play: It allows you to effortlessly connect several oil hydraulic lines at the same time. The fixed arrangement of the coupling elements eliminates confusion and the duration of the coupling process is shortened enormously. There are neither fluid losses nor air inclusions during the coupling and uncoupling phases, even when ~ Presence of pressure. Incorrect connections are virtually impossible.The 4-way multi-coupling set is used here:Hydraulic equipment for agricultural machinesHydraulic equipment for forestry machinesHydraulic equipment for conveyor machinesHydraulic equipment for commercial vehiclesComponents on test benches for hydraulic systemsCooling or heating when molding plastic and metal< li>Hydraulic systems in industrial applicationsHydraulic systems for special transport vehicles ~Scope of delivery / technical data:Complete with fixed and loose parts Assembly 2, DN10Pressure max. 350 barFlow 45 L/minConnection R1/2"

Automated workflows in manufacturing, testing, controlling and regulating require the highest precision. This is where our multi-coupling 2-way set comes into play: It allows you to effortlessly connect several oil hydraulic lines at the same time. The fixed arrangement of the coupling elements eliminates confusion and the duration of the coupling process is shortened enormously. There are neither fluid losses nor air inclusions during the coupling and uncoupling phases~ even at ~ Presence of pressure. Incorrect connections are virtually impossible.The multi-coupling 2-way set is used here:Hydraulic equipment for agricultural machinesHydraulic equipment for forestry machinesHydraulic equipment for conveyor machinesHydraulic equipment for commercial vehiclesComponents on test benches for hydraulic systemsCooling or heating when molding plastic and metal< li>Hydraulic systems in industrial applicationsHydraulic systems for special transport vehicles ~Scope of delivery / technical data:Complete with fixed and loose parts Assembly 2, DN10Pressure max. 350 barFlow 45 L/minConnection R1/2" female

The multi-coupling PSF from dnp was developed to enable coupling under residual pressure on the tool side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200 bar! The special seals on the connectors are designed for this application.The hydraulic lines are connected via flat-sealing coupling elements through which several hydraulic lines can be connected or separated within a very short time. This is done with an operating lever whose guide link is designed in such a way that the operating forces are kept as low as necessary.The outstanding features of the multi-coupling are the security of connections, quick connection, ability to couple under residual pressure and optimally minimized leakage during the coupling process. Another advantage is the interchangeability with the Faster multi-coupling P206. Not only are the two halves of the multi-coupler with Faster P206 interchangeable, but also the plugs and sockets.Assembly 2/DN10Pressure max. 250 barFlow rate max. 80 l/minConnection R1/2?IG

The multi-coupling PSF from dnp was developed to enable coupling under residual pressure on the tool side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200 bar! The special seals on the connectors are designed for this application.The hydraulic lines are connected via flat-sealing coupling elements through which several hydraulic lines can be connected or separated within a very short time. This is done with an operating lever whose guide link is designed in such a way that the operating forces are kept as low as necessary.The outstanding features of the multi-coupling are the security of connections, quick connection, ability to couple under residual pressure and optimally minimized leakage during the coupling process. Another advantage is the interchangeability with the Faster multi-coupling P506. Not only are the two halves of the multi-coupler with Faster P506 interchangeable, but also the plugs and sockets.Assembly 2/DN10Pressure max. 250 barFlow rate max. 46 l/minConnection R1/2?IG

Through various combination options by reconnecting the supplied PTO shaft stub, gear ratios of 1:1, 1:2 or 2:1 can be achieved while maintaining or changing the direction of rotation. This results in 6 different possible uses. The PTO shaft stub is fixed in the hollow shafts by circlips.44 kW at 540 rpm or 1000 rpm.PTO shaft connections: 3x 1 3/8 x 6Generally, torque peaks are up to 2 times higher of the nominal torque does not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

According to ISO 7241-1A, push-pull versionplug

The temperature control is a system with an adjustable thermostat, without oil contact. The switching temperature can be adjusted using the rotary knob on the housing. Furthermore, the control can be based on the rail system. the oil air cooler series asa rail can be mounted. This allows the control to be flexibly pushed to a desired position and then tightened. The final wiring to the fan must be carried out individually by the customer.Housing material: sheet steel, powder-coatedInstallation position: anyAdjustable switching range: -30/+120CSwitching capacity C.1-10/2, 5)A/250V, C2-6(2.5)A/250Vmax. Head temperature: +85Cmax. Sensor temperature: +150C